* fix(setup): allow re-selecting already configured agents and overwrite existing MCP config
Previously, agents with existing Context7 MCP config were disabled in the
selection prompt with "(already configured)" and their config was never
updated. This made it impossible to reconfigure an agent (e.g. rotate API
key or fix a broken URL) without manually editing config files.
Now all agents are always selectable, existing config is overwritten with
fresh entries on re-setup, and TOML replacement correctly handles
sub-sections like http_headers.
* fix(setup): eliminate double file read and whitespace drift in TOML overwrite
Inline the server existence check into appendTomlServer to avoid reading
the file twice. Normalize whitespace around the replaced block so repeated
re-configurations do not accumulate blank lines.
* chore: add patch changeset for setup reconfiguration fix
* fix(setup): resolve all OpenCode config file variants for MCP setup
OpenCode supports 4 config file names (opencode.json, opencode.jsonc,
.opencode.json, .opencode.jsonc) but setup only checked opencode.json
and opencode.jsonc. Users with dotfile variants were never detected as
"already configured" and setup would create a duplicate opencode.json.
Changed mcp.projectPath/globalPath (single string) to
mcp.projectPaths/globalPaths (string[]) so agents can declare all valid
config paths. resolveMcpPath now takes the full candidates array and
returns the first existing file, falling back to the first entry.
Closes#2313
* chore: add patch changeset for OpenCode config variant fix
* refactor(setup): update rule template to be selective with examples
Based on eval benchmarks showing that selective rules with explicit
should/should-not examples achieve 98% recall with 0 false positives,
vs the previous broad rule.
Split RULE_CONTENT into MCP_RULE_CONTENT and CLI_RULE_CONTENT to
support both MCP and CLI setup modes with appropriate tool references.
* feat(setup): install CLI rule alongside skill in ctx7 setup --cli
Previously, CLI setup mode only installed the find-docs skill (66% trigger
rate). Now it also installs a rule file with ctx7 CLI instructions for each
selected agent, matching the MCP setup behavior.
Benchmarks show skill + rule achieves 96-98% trigger rate vs 66% skill-only.
* feat(find-docs): update skill description to improve trigger rate
Replace passive description with pushy version that explicitly names common
libraries and counters Claude's undertriggering tendency.
Eval results: 66% -> 98% clean recall, 72% -> 92% with-context recall.
* chore(setup): remove deprecated RULE_CONTENT export and alwaysApply frontmatter
alwaysApply is not a Claude Code feature (it's Cursor-specific). Claude Code
rules without paths frontmatter load unconditionally by default. Remove the
deprecated alias now that all callers use MCP_RULE_CONTENT or CLI_RULE_CONTENT.
* refactor(setup): fetch rules from GitHub, add alwaysApply for Cursor
- Rule source of truth in rules/context7-mcp.md and rules/context7-cli.md
- templates.ts fetches from GitHub raw (master then main)
- getRuleContent(mode, agent) adds alwaysApply frontmatter for Cursor
- CLI setup now logs rule install failures instead of silently swallowing
* refactor(setup): add Codex agent, remove needsAlwaysApply field, use shared installRule
- Add Codex agent config with AGENTS.md append support
- Remove needsAlwaysApply field (hardcoded cursor check in templates.ts)
- CLI setup uses shared installRule instead of inline CLI_RULE_PATHS
- installRule handles both file-based (Claude/Cursor/OpenCode) and
append-based (Codex/AGENTS.md) rule installation
* refactor(setup): unify CLI setup with MCP agent picker, group output by agent
- CLI setup now uses the same agent picker as MCP setup (no auto-detection)
- Output grouped by agent instead of repeating find-docs for each path
- Removed unused promptForInstallTargets/getTargetDirs imports
* fix(setup): add branch fallback URL for rule fetch, show error on rule failure
* fix(setup): OpenCode uses AGENTS.md, fix append logic for existing files
- OpenCode rule changed from .opencode/rules/ to AGENTS.md (append type)
since OpenCode reads AGENTS.md natively, not a rules directory
- Fixed append logic: proper spacing for empty/non-empty files, clean
idempotent replacement on re-run, preserves existing content
* test(setup): add tests for rule install, MCP config, and AGENTS.md append
* chore(setup): remove unused mergeInstructions and instructionsGlob
* fix: lint formatting, add changeset
* fix(setup): Codex global rule goes to ~/.codex/AGENTS.md
* fix(setup): align CLI output format with MCP output
* feat(setup): add --codex flag for MCP and CLI setup
* docs(rules): align trigger language with skill, use npx ctx7@latest in CLI rule
* docs(rules): prefer ctx7 over web search for library docs
* docs(find-docs): prefer skill over web search in description
* docs(rules): consolidate trigger language, add selection criteria
* docs(rules): add query quality guidance and auth env var to CLI rule
* cleanup
* fix: remove branch URL, add offline fallback matching rule files exactly
* fix(setup): support opencode.jsonc, strip JSON comments, fix detect path
- readJsonConfig now strips // and /* */ comments before parsing (JSONC support)
- resolveMcpPath checks for .jsonc variant when .json is specified
- OpenCode detect paths include both opencode.json and opencode.jsonc
- Fixed OpenCode project path from .opencode.json to opencode.json
* fix(setup): fix JSONC comment stripping to preserve URLs in strings
The regex-based comment stripper was matching // inside string values
(e.g., https:// URLs), corrupting the JSON. Replaced with a character-
level parser that skips string literals before stripping comments.
* fix(setup): Codex uses TOML config.toml, detect .opencode.json variant
- Codex MCP writes to ~/.codex/config.toml using [mcp_servers.context7]
TOML sections instead of JSON (matches Codex docs and add-mcp tool)
- OpenCode detection checks opencode.json, opencode.jsonc, and .opencode.json
- Added TOML server block writer with idempotent append
- stripJsonComments now handles URLs in strings correctly
* test(setup): add JSONC, TOML, and resolveMcpPath tests
12 new tests covering:
- JSONC: comment stripping preserves URLs, block comments, plain JSON
- resolveMcpPath: .jsonc resolution, .json fallback, non-json passthrough
- TOML: buildTomlServerBlock output, http_headers, readTomlServerExists,
appendTomlServer (empty file, preserve existing, idempotent)
* fix(setup): Codex MCP needs type=http, fix checkbox disabled item selection
- Codex TOML entry now includes type = "http" (required by Codex)
- Checkbox cursor starts on first non-disabled item
- Checkbox navigation skips disabled items
* fix: address PR review feedback on rules and skill description
- Surface libraryId format (/org/project) in step 2 where selection happens
- Suggest retrying with alternate names/queries instead of just punctuation
- MCP rule: explicitly require resolve-library-id unless /org/repo provided
- Skill description: explicitly warn against relying on training data for APIs
* fix: consistent /org/project format in MCP rule
* fix: revert opencode detection paths to original
* feat: enhance Context7 server configuration with website URL, description, and detailed usage instructions
* run format
* add changeset
* feat: align MCP server instructions with eval-proven trigger language
Based on invocation routing benchmarks (60 queries, clean + mid-session):
- Named specific libraries to counter confidence skip
- Added 'even when you think you know the answer' override
- Added 'prefer over web search' to catch WebSearch fallback
- Unified trigger paragraph to match client rule format
- Added explicit 'do not use for' negatives
---------
Co-authored-by: Fahreddin Özcan <ozcanfahrettinn@gmail.com>
* fix(cli): use ~/.agents/skills for global universal skill installs
The universal global path was ~/.config/agents/skills, but the
canonical standard (used by Vercel's skills CLI and OpenAI Codex)
is ~/.agents/skills. This aligns context7 with the broader ecosystem.
Fixes#2276
* chore: add changeset for global skills path fix
* fix(cli): remove shell:true from spawn in generate command
Removes shell:true from the child_process.spawn() call that opens
the user's editor. The editor path and preview file path are already
passed as separate arguments, so shell interpolation is unnecessary.
Using shell:true allows shell metacharacters in EDITOR or file paths
to be interpreted, which is a command injection vector.
Fixes#2240
This contribution was developed with AI assistance (Claude Code).
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* chore: add changeset for shell:true removal
---------
Co-authored-by: Matt Van Horn <455140+mvanhorn@users.noreply.github.com>
Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
Co-authored-by: Fahreddin Özcan <ozcanfahrettinn@gmail.com>
* fix(cli): prevent directory traversal in skill file installation
installSkillFiles() used path.join() with unsanitized file paths from
GitHub API responses. A malicious skill repository could include files
with "../" sequences in their paths, allowing writes outside the
intended skill directory.
Changes:
- installer.ts: use path.resolve() and verify the resolved path stays
within the skill directory boundary before writing
- github.ts: reject file paths containing ".." at download time as an
additional defense-in-depth check
* chore: add changeset for directory traversal fix
* fix: format installer.ts to pass prettier lint
---------
Co-authored-by: Fahreddin Özcan <ozcanfahrettinn@gmail.com>
* fix(mcp): support NODE_EXTRA_CA_CERTS for enterprise MITM proxies
When NODE_EXTRA_CA_CERTS is set, reads the CA certificate file and
injects it into undici's global dispatcher. This fixes fetch failures
behind enterprise transparent SSL intercept proxies (Zscaler, etc.)
where the default TLS context does not trust the corporate CA.
The CA certs are also passed through when an explicit HTTPS_PROXY is
configured, so both proxy modes work with custom certificates.
Fixes#2268
This contribution was developed with AI assistance (Claude Code).
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* chore: add changeset for NODE_EXTRA_CA_CERTS support
---------
Co-authored-by: Matt Van Horn <455140+mvanhorn@users.noreply.github.com>
Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
Co-authored-by: Fahreddin Özcan <ozcanfahrettinn@gmail.com>
The single deployment.mdx page implied Kubernetes-only deployment. Split it into
a deployment/ folder with separate Docker and Kubernetes guides, and simplify the
on-premise getting started page to link to them via Mintlify cards.
* fix(cli): add token refresh support and centralize auth constants
Expired OAuth tokens are now automatically refreshed via getValidAccessToken()
instead of silently failing. CLI_CLIENT_ID moved to constants.ts to avoid
duplication across auth.ts and setup.ts.
* refactor(cli): internalize baseUrl and clientId in refreshAccessToken
Make refreshAccessToken a private function that resolves getBaseUrl()
and CLI_CLIENT_ID internally instead of requiring them as parameters.
* test(cli): add unit tests for auth utilities and commands
Add comprehensive vitest test suite covering OAuth PKCE flow, token
persistence, token refresh, and CLI auth commands (login/logout/whoami).
* chore: add changeset for CLI auth improvements
* refactor: move CLI auth tests to src/__tests__/
Move auth test files from colocated __tests__ directories to a
centralized src/__tests__/ directory, adjusting mock import paths
accordingly.
The previous description was scoped to "programming library or framework",
causing the skill to be skipped for CLI tools, cloud services, APIs, platforms,
and general technical questions. The new description covers any developer
technology and includes common trigger scenarios to improve auto-invocation.
Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
New deployment.mdx page under the On-Premise section covering
StatefulSet, Service, Ingress manifests, registry auth, networking
requirements, operations, and troubleshooting for K8s deployments.
* feat(cli): add teamspace name to whoami command
Replace direct Clerk userinfo call with new /api/dashboard/whoami
endpoint that returns name, email, and active teamspace in one request.
* chore: add changeset for whoami teamspace feature
* feat(cli): enumerate popularity and trust in skill search results
Replace raw install counts with star-based popularity rating (★☆☆/★★☆/★★★)
and numeric trust scores with High/Medium/Low labels in skill search,
install, and suggest commands. Show install range and raw trust score
in the hover description. Also reorder setup command to show CLI before MCP.
* feat(cli): use 4-star popularity scale matching install count ranges
* fix(cli): replace hardcoded "docs" with "find-docs" in setup output
* chore: add changeset for skill search enumeration and find-docs rename
* refactor(skills): consolidate skills under /skills with canonical sources
- Rename skills/docs → skills/find-docs (name: find-docs)
- Rename skills/ctx7-cli → skills/context7-cli (name: context7-cli)
- Add skills/context7-mcp as canonical MCP skill source
- Rename plugin skill folders to context7-mcp and unify name to context7-mcp
- MCP setup now downloads context7-mcp skill from GitHub instead of using hardcoded SKILL_CONTENT
- Remove SKILL_CONTENT from templates.ts — skills/context7-mcp/SKILL.md is the single source of truth
- Add Error Handling section to find-docs skill for quota errors
- Update agents.ts skill name: documentation-lookup → context7-mcp
- Update docs/clients/cli.mdx and setup references accordingly
* chore: add changeset for skills consolidation
* fix(skills): update plugin skill frontmatter name and setup docs to context7-mcp
* feat(cli): add CLI mode to ctx7 setup with docs skill installation
- Add MCP vs CLI mode selection prompt at the start of setup
- CLI mode authenticates user and installs docs skill via promptForInstallTargets
- Add --cli, --universal, --antigravity flags to setup command
- --yes skips the detected-locations confirmation prompt
- Default CLI install scope to global (override with --project)
- Fix checkbox selected choices to render in green (consistent with select prompt)
- Move Claude Code above Universal in IDE selection order
- Add forceUniversal=false option to promptForInstallTargets for setup flow
- Add yes? to AddOptions to support auto-confirm in promptForInstallTargets
* chore: add changeset for ctx7 setup CLI mode
* feat(cli): rename CLI mode to CLI + Skills, add --mcp flag, remove recommended label
* feat(cli): add --api-key support to CLI mode and update docs
- Pass apiKey through to resolveCliAuth in CLI mode setup
- Store provided API key as bearer token for subsequent API calls
- Update cli.mdx and setup.md to reflect both MCP and CLI + Skills modes
* docs: update setup docs to reflect --api-key for both modes and --cursor for CLI
- --api-key works in both MCP and CLI + Skills mode (not MCP-only)
- --oauth clarified as MCP-only
- Added --cursor to CLI + Skills mode examples (Cursor has a skills directory)
- Updated auth table row for ctx7 setup
* fix(cli): improve library ID validation and add telemetry headers
- Validate /owner/repo format locally before spinner starts, showing
consistent error + hint for both "react" and "/react" inputs
- Send X-Context7-Source, X-Context7-Client-IDE, X-Context7-Client-Version,
and X-Context7-Transport headers on library/docs requests so CLI
appears in the admin telemetry dashboard
* feat(cli): show source repo next to skill name in search and suggest results
Adds the project repo in parentheses after each skill name to help
disambiguate skills with identical names from different repositories.
* chore: add changeset for repo display in skill search
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
* feat(docs): add dedicated docs skill and restructure CLI documentation
- Add new `docs` skill as a single-file skill for documentation retrieval
- Align skill prompts with MCP tool descriptions (selection process, query guidance, 3-call limit)
- Enrich CLI docs page with result fields, query tips, and version-specific IDs
- Move CLI page to Overview section in docs nav
- Make `query` required for `ctx7 library` across all skills and docs
- Update trust score display label in skills.mdx
* feat(cli): align library output format with MCP labels
Use labeled fields and categorical Source Reputation labels
(High/Medium/Low/Unknown) instead of numeric trust scores to match
the MCP transport format.
* refactor: move skills from .agents/skills to skills/ at repo root
Source-control location for skills — users install them into
.agents/, .claude/, etc. via the CLI. Also updates install
instructions to use `npm install -g ctx7@latest` or `npx ctx7@latest`.
* docs: use natural-language query examples across skills and CLI docs
Replace keyword-style queries ("useEffect cleanup") with full
question-style queries ("How to clean up useEffect with async
operations") to better demonstrate how the query parameter works.
* docs: fix trust score description to show numeric range
Replaces the cli.mdx redirect stub with a full CLI reference covering library
documentation, setup, authentication, and all skills commands. Trims skills.mdx
to conceptual content only with a reference back to the CLI page. Updates the
ctx7-cli skill's docs reference with selection algorithm and query quality
guidance from the MCP tool prompts.
github-actions[bot]