1b271a690c
Release v0.2.8
2025-10-08 03:09:27 +00:00
0a77bbaa43
Add GLB export w/ gltfpacking ( #218 )
...
* Add GLB export w/ gltfpacking
Also separate 3d model exports into multiple tasks
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
* Switch to gltfpack-sys lib
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
* Bump gltfpack to drop cmake dependency
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
---------
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
2025-10-07 20:28:24 -04:00
8170a10b1d
Add "ground" copper role, don't use role in symmetric checks ( #217 )
...
* Don't use role in symmetric check
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
* Add "ground" copper role
This is only for internal use as kicad only supports power.
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
* Sync stdlib board_config.zen for documentation
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
---------
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
2025-10-07 18:32:34 -04:00
0c7b1bf1ba
Release v0.2.7
2025-10-06 14:35:41 +00:00
461d30b3f2
Add a workflow for bumping version ( #216 )
...
Use this instead of the "pcb-tag-release" script.
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
2025-10-06 10:28:40 -04:00
602303f9a1
Add description as Component parameter ( #215 )
...
* Add description as Component param
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
* Fall back to symbol datasheet, description if not set
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
---------
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
2025-10-05 20:48:59 -04:00
6b65301cce
Add spec to BoardConfg() and datasheet to Component() ( #214 )
...
* Add spec to BoardConfig
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
* Add datasheet as Component param
Also, sets the built-in "Datasheet" field instead of adding a custom
"datasheet" field.
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
---------
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
2025-10-05 18:07:38 -04:00
aacae1f857
Fix flaky test race condition ( #213 )
...
Both component_duplicate_pin_names and
component_manufacturer_from_symbol were using test_symbol.kicad_sym,
which caused the contents of one test to be visible to the other. Use
different file names as a short-term fix for this.
Example CI flakes: https://github.com/diodeinc/pcb/actions/runs/18253545573/job/51971797596?pr=212
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
2025-10-05 00:27:53 -04:00
304551b1db
Add better error messages, update blinky.zen (and add it to CI) ( #212 )
...
* Improve pcb layout error messages
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
* Update blinky code to use versioned stdlib, board config
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
* Keep examples/blinky.zen in sync with README.md blinky
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
* Build all examples in CI
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
* Build all examples
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
---------
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
2025-10-05 00:27:42 -04:00
6e6e65daf9
Release v0.2.6 ( #211 )
2025-10-05 04:18:49 +02:00
40a5ec69b1
Add pcb-tag-release script ( #210 )
...
Usage:
```
pcb-tag-release v0.2.6
```
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
2025-10-04 22:17:37 -04:00
4042c809c7
Fetch all tags and branches when updating git dependencies ( #209 )
...
The previous implementation only fetched the default refspec, which could
miss new tags, branches, or force-updated refs. This caused worktree
creation to fail when trying to check out newly published versions.
Now explicitly fetches:
- All tags (--tags)
- All branches (+refs/heads/*:refs/heads/*)
- Force-updated refs (--force)
- Prunes deleted refs (--prune, --prune-tags)
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
2025-10-04 22:15:48 -04:00
58f91840a8
add support for dielectric sublayers ( #208 )
2025-10-05 03:25:26 +02:00
2d81c942aa
Only delete worktrees on pcb clean ( #207 )
...
* Only delete worktrees on `pcb clean`
Leave the bare repos as they're just stable object stores.
If `--force` is set, nuke everything.
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
* Add fast path that bypasses file locking
fslock is a bit slow on macos
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
---------
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
Co-authored-by: akhilles <akhilvelagapudi@gmail.com >
2025-10-04 01:16:53 -04:00
a877cfd530
Use git worktrees for more efficient dep fetching ( #206 )
...
Loading multiple versions/refs from the same repository required
separate full clones. This was slow, wasted disk space, and network
bandwidth despite having 90%+ content overlap in some cases.
Use git worktrees with a shared bare repository as the object store.
Each version gets a lightweight working directory that references the
same underlying git objects.
Also use a .lock file to avoid race conditions.
Cache Structure:
~/.cache/pcb/github/{user}/{repo}/
├── .repo/ # Shared bare repo
├── .repo.lock # Lock file
├── v0.2.7/ # Worktree
└── v0.2.10/ # Worktree
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
2025-10-04 00:15:01 -04:00
03776f66f0
[ENG-84] First-party DNP support ( #204 )
...
* [ENG-84] First-party DNP support
* format
2025-10-03 11:01:35 -04:00
da5eecaf98
Fix geber export ( #203 )
2025-10-02 18:31:00 -04:00
4dd6bd1027
Release v0.2.5 ( #202 )
2025-10-02 18:04:51 -04:00
67b164f34b
Add builtin.add_electrical_check ( #199 )
...
* Add builtin.add_electrical_check
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
* Add snapshot tests
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
* Add checks arg to io()
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
* le final api
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
* Allow constructing PhysicalRange with PhysicalRange value
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
* Reduce API surface, only expose check_voltage_within
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
---------
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
2025-10-02 17:57:46 -04:00
56c88f23de
Make TestBench() check eval lazy ( #198 )
...
* Don't alloc to get suppress_errors field
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
* Make TestBench() check eval lazy
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
* Simplify
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
* Remove evalmode
It's no longer needed as pcb build and pcb test do eval the same way
now. The only difference is post-eval.
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
* Update TestBench() spec
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
* Add a rano parse unit test
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
---------
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
2025-10-02 17:43:29 -04:00
5bfe35c143
Fix single-net interface net naming ( #201 )
...
Before: check that interface has 1 field and that it is a net
After: check that interface has 1 net field (and no interfaces)
This allows for adding metadata fields without changing the net naming.
This should (hopefully) not cause that much churn because we haven't
really used metadata fields in interfaces yet.
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
2025-10-02 13:25:06 -04:00
e6b5ff186e
First-party component manufacturer support ( #200 )
...
* Add manufacturer to component
* Parse manufacturer from symbol
* add to netlist
* cargo fmt
2025-10-02 09:24:14 -07:00
8356e663ff
Release v0.2.4 ( #197 )
2025-10-01 18:02:20 -04:00
1b5886086a
Fix for removePositions lookup ( #196 )
2025-10-01 17:59:44 -04:00
1680e12d65
Add physical value ranges ( #195 )
...
* Dedup quantity str
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
* Switch to get_methods for builtin
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
* Add PhysicalRange
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
* Remove unused ComponentFactoryValue
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
* Document the physical range feature
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
* Add ser/de and InputValue support for ranges
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
* Ensure min <= nominal <= max
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
* Add min, nominal, max, unit attrs to physical range
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
---------
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
2025-10-01 16:57:01 -04:00
d84cb60c6f
Release v0.2.3 ( #194 )
2025-10-01 14:54:48 -04:00
5e669e6fcb
Bunch of minor fixes from testing against read boards ( #193 )
...
- Make # of user layers configurable (defaults to 4)
- Preserve all kicad standard technical layers
- Add 0 value placeholder entries for predefined sizes
- Fix layers sexpr formatting
- Make netclass diff_pair_via_gap and priority configureable
- For "Default" netclass, modify the default
- Add better type hints
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
2025-10-01 14:50:56 -04:00
71fc380f32
v0.2.2 ( #192 )
2025-10-01 10:37:55 -04:00
c816722f52
Add LSP command to delete position comment ( #191 )
2025-10-01 10:35:57 -04:00
0c7a770d44
Don't auto DNP TP* designators ( #190 )
...
Some test points may require parts.
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
2025-09-30 13:21:58 -04:00
a2ffe8f823
Release v0.2.1 ( #189 )
2025-09-30 11:47:56 -04:00
ac8434ff42
Board-level configuration ( #188 )
...
* Add `builtin.add_board_config`
Sets constraints
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
* Enable json extension
Useful for debugging
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
* More compact config mapping
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
* Add predefined sizes support to board config
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
* Make all board config fields optional, add merging
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
* Add netclass support to board config
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
* Add stackup support, sexpr library
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
* Patch stackup on `pcb layout`
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
* Sync board config by default
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
* Fix deep_merge
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
* Document board config feature
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
* Flatten netclasses
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
* Add base configurations
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
* Remove unused _is_new_board
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
* Move board_config.zen to examples/
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
* Use pcb-sexpr
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
* Replace --dont-sync with --sync (default true)
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
---------
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
2025-09-29 15:57:15 -04:00
5aff6c7e45
Use mirrored kicad image ( #187 )
...
* Use mirrored kicad image
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
* Add comment for how to sync
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
---------
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
2025-09-25 17:32:25 -04:00
71984e70af
Try ubicloud runners ( #185 )
...
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
2025-09-25 15:53:51 -04:00
49163707bc
Bump dist, drop brew, npm support ( #183 )
...
* Bump dist, drop brew, npm support
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
* Use large runners
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
---------
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
2025-09-25 13:57:06 -04:00
eeabb9dcca
Release v0.2.0 ( #184 )
2025-09-25 13:48:11 -04:00
632eb6278b
Don't auto-update in CI ( #182 )
...
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
2025-09-23 23:54:13 -04:00
92c512e21d
Release v0.2.0-prerelease.12 ( #181 )
2025-09-23 23:27:50 -04:00
d9bfb02551
Unified caching for load(), Module() ( #180 )
...
* Simplify eval error wrapping
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
* Simply Module() span resolution
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
* Unified caching for load(), Module()
This simplifies the code and improves the performance substantially.
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
---------
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
2025-09-23 23:19:39 -04:00
dcca0defe8
Add physical value comparison,.with_value() ( #177 )
...
* Add compare, equals support to PhysicalValue
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
* Fix inconsistent attr data
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
* fixup! Add compare, equals support to PhysicalValue
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
* Add PhysicalValue builtin, add .with_value()
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
---------
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
2025-09-23 16:30:19 -07:00
83bb82e474
Add canonicalize cache to default file provider ( #179 )
...
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
2025-09-23 18:05:13 -04:00
6d1e1893a0
Prioritize new net names over old net names ( #178 )
...
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
2025-09-23 17:47:25 -04:00
3145c214ac
Fix unstable ref warning performance regression ( #176 )
...
* Generate unstable ref warnings after cache check
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
* Don't suppress introspection diagnostics
This is not relevant because we only raise diagnostics once per "load".
So, if introspection does transient loads, those diagnostics will be
forever suppressed if not raised during introspection.
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
---------
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
2025-09-23 11:01:40 -04:00
e00ea920ed
Add support for kicad schematic bom as fallback ( #174 )
...
* Make path optional in board config
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
* Delete read-only staged files
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
* Parse kicad schematic bom
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
* Use last segment of package
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
* Add kicad bom fallback to `pcb bom`
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
---------
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
2025-09-22 17:29:36 -04:00
9aa712ad66
Fail gracefully when current file has no spec ( #175 )
...
* Fail gracefully when current file has no spec
LSP should never panic. Just propagate the error to the client. This
should just be a transient state. Also, remove redundant file existence
check.
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
* Ignore non-existent paths when vendoring
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
---------
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
2025-09-22 17:29:27 -04:00
a857f2b5c6
Release v0.2.0-prerelease.11 ( #173 )
2025-09-22 11:21:40 -04:00
acac11ae21
Re-tag "latest" on push to main ( #171 )
...
Currently, we only delete + push the release. But the release still points to the old tag.
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
2025-09-22 09:51:53 -04:00
63cfd96660
Parse lowercase "hz" as Hertz ( #172 )
...
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
2025-09-22 09:51:35 -04:00
332128e034
Make load(), Module() case-sensitive ( #169 )
...
Signed-off-by: akhilles <akhilvelagapudi@gmail.com >
2025-09-21 15:05:08 -04:00
bd642654d6
pcb vendor --ignore-errors (#170 )
...
* `pcb vendor --ignore-errors`
* update snapshot
2025-09-21 14:44:19 -04:00
Diode Robot