Previously, the `aio_monitoring_stable` job (which runs tests against
https://angular.io/) was using the tests from the master branch. As a
result, if the master branch included changes in those tests that were
not yet backported to the stable branch (and thus deployed to
https://angular.io/), the tests would fail.
This commit fixes this by using the tests from the stable branch to test
against https://angular.io/.
Fixes#30101
PR Close#30110
Previously, the `aio_monitoring` job was testing both the stable
(https://angular.io/) and the @next (https://next.angular.io/) versions.
This commit splits the tests into two separate jobs (still run as part
of the same workflow). This speeds up the tests (since the two jobs can
now run in parallel) and makes it easier to isolate failures (e.g.
identify which branch is failing, disable one of the two, etc.).
(Credits to @petebacondarwin 😉)
PR Close#30110
The job started failing for https://angular.io/, due to changes in tests
that only affected https://next.angular.io/, and was disabled in #30102.
This commit re-enables the job (since it does not block anything and it
will be fixed in a subsequent commit).
PR Close#30110
With #30058, the ngUpgrade internal `angular.module()` method wa
renamed to `angular.module_()` (to avoid a webpack bug).
Merging #29794 afterwards resulted in some broken tests, because it
still used the old `angular.module()` method name. (The PR had been
tested on CI against a revision that did not contain the rename.)
This commit fixes the broken tests by renaming the remaining occurrences
of `angular.module()`.
PR Close#30107
Previously, under certain circumstances, `NgZone#onMicrotaskEmpty` could
emit while a `$digest` was in progress, thus triggering another
`$digest`, which in turn would throw a `$digest already in progress`
error. Furthermore, throwing an error from inside the `onMicrotaskEmpty`
subscription would result in unsubscribing and stop triggering further
`$digest`s, when `onMicrotaskEmpty` emitted.
Usually, emitting while a `$digest` was already in progress was a result
of unintentionally running some part of AngularJS outside the Angular
zone, but there are valid (if rare) usecases where this can happen
(see #24680 for details).
This commit addresses the issue as follows:
- If a `$digest` is in progress when `onMicrotaskEmpty` emits, do not
trigger another `$digest` (to avoid the error). `$evalAsync()` is used
instead, to ensure that the bindings are evaluated at least once more.
- Since there is still a high probability that the situation is a result
of programming error (i.e. some AngularJS part running outside the
Angular Zone), a warning will be logged, but only if the app is in
[dev mode][1].
[1]: https://github.com/angular/angular/blob/78146c189/packages/core/src/util/ng_dev_mode.ts#L12Fixes#24680
PR Close#29794
PR Close#30107
When targeting ES2015 (as is the default in cli@8), `const` is not
downleveled to `var` and thus declaring `const module` throws an error
due to webpack wrapping the code in a function call with a `module`
argument (even when compiling for the `web` environment).
Related: webpack/webpack#7369
Fixes#30050
PR Close#30058
PR Close#30107
The exact messages depend on the timing of several events and may vary
between runs. This occasionally causes flakes on CI.
This commit reduces the risk of flakes by loosen the conditions to only
check for what we actually care about.
Fixes#29544
PR Close#29757
This directory contains some top-level files (`.gitignore`,
`tsconfig.json`, `tslint.json`) that are related to the examples
infrastructure (building, linting, etc.).
They had previously no owner; now they are owned by the `docs-infra`
group.
PR Close#30087
Previously, an instance of HttpParams would retain its list of mutations
after they have been materialized as a result of a read operation. Not
only does this unnecessarily hold onto memory, more importantly does it
introduce a bug where branching of off a materialized instance would
reconsider the set of mutations that had already been applied, resulting
in repeated application of mutations.
This commit fixes the bug by clearing the list of pending mutations
after they have been materialized, such that they will not be considered
once again for branched off instances.
Fixes#20430
PR Close#29045
This minimises the risk of unexpected failures due to breaking changes,
when building a new image (e.g. as a result of an unrelated config
change in Dockerfile).
PR Close#29976
Previously, the preview server docker image was based on Debian 8
(jessie). Recently, `jessie-updates` and `jessie-backborts` were removed
from the Debian mirrors ([more info][1]), thus breaking new builds of
the image.
Instead of updating `/etc/apt/sources.list` to remove the obsolete
sources, this commit upgrades to Debian 9 (stretch).
(The GCE VM running the preview server docker container was also
upgraded from Debian 8 to 9 this morning.)
---
Other changes:
- Removed dependency on `chkconfig`, which is not supported on Debian 9.
- Installing `nginx` from the regular repositories (instead of
`*-backports).
- Upgraded to `pm2` v3, which can handle hooking itself up to system
startup better (without `chkconfig` - see above).
- Updated tests to reflect the fact that `nginx` has dropped the reason
phrase in response status lines for HTTP/2 (in compliance with
[the spec][2]). (HTTP/1.1: `HTTP/1.1 200 OK` | HTTP/2: `HTTP/2 200`)
[1]: https://www.lucas-nussbaum.net/blog/?p=947
[2]: https://http2.github.io/http2-spec/#rfc.section.8.1.2.4
PR Close#29976
In #29926, the size of the build artifacts has increased due to turning
on differential loading (which generates an es2015/es5 pair for each JS
resource).
To avoid the preview server's rejecting the build artifacts (as in
[288181][1]), this commit increases the max allowed artifact size from
20MB to 25MB (current artifact size after #29926 is ~22MB).
[1]: https://circleci.com/gh/angular/angular/288181
PR Close#29976
The 7.2.x does not include the code necessary to build with Ivy. The
`test_aio_local_ivy` job needs to be skipped on 7.2.x.
The job was accidentally enabled while rebasing 1cdffbdc2.
PR Close#29993
In #29953, the wait period for SW on localhost was increased to avoid CI
flakes for the PWA score tests.
This commit expands the fix to non-localhost origins to avoid flakes in
the `aio_monitoring` job, when CircleCI VMs/network are slow.
(For reference, example failures: [289127], [289238])
[289127]: https://circleci.com/gh/angular/angular/289127
[289238]: https://circleci.com/gh/angular/angular/289238
PR Close#29988
In light of #29926, that will change the path of `tsconfig.app.json`,
this commit switches from a hard-coded `tsconfig.app.json` path to
looking it up in `angular.json` (to be more future-proof).
PR Close#29989
Previously, the `build-with-ivy` script could be used to build the `aio`
project with Ivy (once it had been prepared with `ivy-ngcc`, etc.) and
then restored the configuration (e.g. `tsconfig.json`) to non-ivy mode.
As a result, it was not useful for running other commands (e.g. unit/e2e
tests) in Ivy mode.
This commit renames the script to `switch-to-ivy` and employs a
different model (similar to `ng-packages-installer`), where the project
is setup to run in Ivy mode and then all subsequent commands are
executed in that mode (until restored).
Since this is currently only used on CI, there is no automatic way to
switch back to non-ivy mode (but it could be implemented in the future
if needed).
Finally, the script now modifies `src/tsconfig.app/json` instead of
`tsconfig.json` to ensure that the `angularCompilerOptions` are not
ignored/overwritten. This is also closer to what the cli generates
with the `--enable-ivy` option.
PR Close#29989
To better test ngcc (in addition to Ivy) on angular.io, change the
`test_aio_local_ivy` CircleCI job to use the pre-ivy Angular packages
(and have ngcc transform them to Ivy ones).
PR Close#29989
The server used for testing on localhost has less optimizations (e.g.
serves uncompressed files), so we need to wait longer the ServiceWorker
to be loaded and registered to allow Lighthouse to reliably detect it,
especially on slower environments (e.g. CI).
Related: https://github.com/GoogleChrome/lighthouse/issues/5527#issuecomment-483710849Fixes#29910
PR Close#29953
The PWA score tests have been occasionally failing on CI recently
(possibly due to CI VM/network issues).
This commit temporarily disables them, until we investigate the
root-cause and/or put a work-around in place.
The PWA score tests are still run against the deployed versions (which
don't suffer as much) or PRs with public previews (as part of the
`test_aio_preview` job) and on upstream builds (as part of the
`deploy_aio` job).
Related to #29910.
[1]: https://github.com/angular/angular/blob/3a836c362/.circleci/config.yml#L390
PR Close#29911
As of b9fead7f8, the image is referenced in `announcements.json`, but it
was already removed (as it wasn't used at the time) in 7f905da33.
PR Close#29902
We are using `chrome-launcher` and `lighthouse-logger` in
[test-pwa-score][1], but we do not explicitly list them as
`devDependencies`, so we are relying on the fact that they happen to be
hoisted in `node_modules/` by yarn. This may unexpectedly break in the
future.
This commit fixes this, by explicitly listing them as `devDependencies`.
[1]: https://github.com/angular/angular/blob/ea70d41ac/aio/scripts/test-pwa-score.js#L14-L18
PR Close#29904
Kara Erickson