This commit adds a new `IncrementalResourceCompilationTicket` which reuses
an existing `NgCompiler` instance and updates it to optimally process
template-only and style-only changes. Performing this update involves both
instructing `DecoratorHandler`s to react to the resource changes, as well as
invalidating `TemplateTypeChecker` state for the component(s) in question.
That way, querying the `TemplateTypeChecker` will trigger new TCB generation
for the changed template(s).
PR Close#40561
To prepare for the optimization of template-only changes, this commit
refactors the `ComponentDecoratorHandler`'s handling of template parsing.
Previously, templates were extracted from the raw decorator metadata and
parsed in a single operation.
To better handle incremental template updates, this commit splits this
operation into a "declaration" step where the template info is extracted
from the decorator metadata, and a "parsing" step where the declared
template is read and parsed. This allows for re-reading and re-parsing of
the declared template at a future point, using the same template declaration
extracted from the decorator.
PR Close#40561
Previously, the incremental flow for NgCompiler was simple: when creating a
new NgCompiler instance, the consumer could pass state from a previous
compilation, which would cause the new compilation to be performed
incrementally. "Local" information about TypeScript files which had not
changed would be passed from the old compilation to the new and reused,
while "global" information would always be recalculated.
However, this flow could be made more efficient in certain cases, such as
when no TypeScript files are changed in a new compilation. In this case,
_all_ information extracted during the first compilation is reusable. Doing
this involves reusing the previous `NgCompiler` instance (the container for
such global information) and updating it, instead of creating a new one for
the next compilation. This approach works cleanly, but complicates the
lifecycle of `NgCompiler`.
To prevent consumers from having to deal with the mechanics of reuse vs
incremental steps of `NgCompiler`, a new `CompilationTicket` mechanism is
added in this commit. Consumers obtain a `CompilationTicket` via one of
several code paths depending on the nature of the incoming compilation, and
use the `CompilationTicket` to obtain an `NgCompiler` instance. This
instance may be a fresh compilation, a new `NgCompiler` for an incremental
compilation, or an existing `NgCompiler` that's been updated to optimally
process a resource-only change. Consumers can use the new `NgCompiler`
without knowledge of its provenance.
PR Close#40561
The Language Service uses the source span of AST nodes to recognize which
node a user has selected, given their cursor position in a template. This is
used to trigger autocompletion.
The previous source span of BindingPipe nodes created a problem when:
1) the pipe binding had no identifier (incomplete or in-progress expression)
2) the user typed trailing whitespace after the pipe character ('|')
For example, the expression `{{foo | }}`. If the cursor preceded the '}' in
that expression, the Language Service was unable to detect that the user was
autocompleting the BindingPipe expression, since the span of the BindingPipe
ended after the '|'.
This commit changes the expression parser to expand the span of BindingPipe
expressions with a missing identifier, to include any trailing whitespace.
This allows the Language Service to correctly recognize this case as
targeting the BindingPipe and complete it successfully. The `nameSpan` of
the BindingPipe is also moved to be right-aligned with the end of any
whitespace present in the pipe binding expression.
This change allows for the disabled test in the Language Service for pipe
completion in this case to be re-enabled.
PR Close#40346
The `LanguageServiceAdapter` must implement `realpath` in order to resolve
symlinks in `node_modules`.
Local libraries are often symlinked in `node_modules` by adding a local
dependency in `package.json`.
Fix https://github.com/angular/vscode-ng-language-service/issues/1083
PR Close#40593
This commit adds a warning in the Elements guide about using
`@Component.selector` as the tag name for the registered custom element.
See also #40452 for context.
PR Close#40510
Updates to rules_nodejs@2.3.3 to take advantage of windows specific fixes.
rules_nodejs@2.3.3 was created as a patch specifically with a fix for
the issues we found updating to rules_nodejs@2.2.2.
PR Close#40581
Update to the latest version of bazel.
`4.0.0` introduced a breaking change on unnecessary backslashes and these
instance are corrected in this change.
PR Close#40579
In older versions of `bazelbuild/rules_nodejs`, the `npm_package.pack`
rule does not work on Windows. This has been fixed in
bazelbuild/rules_nodejs#2257, but the fix is not available before
[version 2.3.0][1].
Currently, we use version 2.2.0 (see [WORKSPACE][2]). In order to allow
the `zone-js-builder.js` script to work on Windows, this commit switches
to using `npm pack` directly, intead of relying on `npm_package.pack`.
For reference, the version of `bazelbuild/rules_nodejs` was updated to
2.3.2 in PR #39636, but this was later reverted due to CI flakes
(4e6d69cc85).
[1]: https://github.com/bazelbuild/rules_nodejs/releases/tag/2.3.0
[2]: https://github.com/angular/angular/blob/fc64fa8e1af9e0bbab40d1b441743744a40c5581/WORKSPACE#L12
PR Close#40557
This PR adds a way for the language server to retrieve compiler options
diagnostics via `languageService.getCompilerOptionsDiagnostics()`.
This will be used by the language server to show a prompt in the editor if
users don't have `strict` or `fullTemplateTypeCheck` turned on.
Ref https://github.com/angular/vscode-ng-language-service/issues/1053
PR Close#40568
Previously, we were naïvely checking whether a function name was a partial linker
declaration call by testing the map of linkers with `linkers[name]`. Since
`linkers` was a plain object, it also matched function names like `toString`!
This has been refactored as a `Map` to avoid the problem.
PR Close#40563
Prior to this commit, the `patchValue()` of the `FormGroup` and `FormArray` classes used to throw an exception
when the `value` argument contained a data structure that has `null` or `undefined` as a value for a field
that represents an instance of `FormGroup` or `FormArray` (for `FormControl` it's not a problem, since it
doesn't have nested controls), since the `patchValue()` method tried to iterate over provided values to
match current data structure.
This commit updates the `patchValue()` logic in `FormGroup` and `FormArray` classes to just ignore `null` and
`undefined` values (without any changes to corresponding `FormGroup` and `FormArray` instances). This
behavior looks inline with the `patchValue()` method goal of "doing its best to match the values to the
correct controls" (quote from docs).
Fixes#36672.
Fixes#21021.
PR Close#40534
PR #39235 introduced additional cleanup logic for form controls and directives. The cleanup logic relies
on the presence of ControlValueAccessor instances on FormControlName and FormControl directives. In general
these fields are present and there are also checks to make sure that the mentioned directive instances are
created with CVAs. However some scenarios (primarily tests) may invoke the logic in a way that the directive
instance would not be fully initialized, thus causing CVA to be absent. As a result, the cleanup logic fails
while trying to call some methods on associated CVA instances.
This commit updates the cleanup logic to take into account the situation when CVA is not present.
Fixes#40521.
PR Close#40526
The ARB format doesn't have a dedicated field for message meaning so these changes include it
as a customize attribute called `x-meaning`.
Fixes#40506.
PR Close#40546
The compliance test runner has various macros that process the
expectation files before actually checking their contents. Among those
macros are i18n helpers, which uses a global message counter to be able
to uniquely identify ICU variables.
Because of the global nature of this message index, it was susceptible
to ordering issues which could result in flaky tests, although it failed
very infrequently.
This commit resets the global message counter before applying the macros.
As a result of this change an expectation file had to be updated; this
is actually a bug fix as said test used to fail if run in isolation (if
`focusTest: true` was set for that particular testcase).
PR Close#40529
Write to the unique log file, to prevent being overwritten, for `FATAL_ERROR`
failures in the release tooling. This will help to assist in determining where
something goes wrong in the process as well as being able to resume the action.
PR Close#40524
Add support for a `--no-branch-prompt` flag for the `ng-dev pr merge` tool. This
flag enables suppression of the confirmation prompt for which branches the specified
PR will merge into.
PR Close#40528
This commit reverts commit [_fix(service-worker): handle error with
ErrorHandler_](https://github.com/angular/angular/pull/39990/commits/552419d).
With Angular v11.0.4 and commit [_fix(service-worker): handle error with
ErrorHandler_](https://github.com/angular/angular/pull/39990/commits/552419d)
Angular start to send all service worker registration errors to the Angular
standard `ErrorHandler#handleError()` interface, instead of logging them in the
console.
But users existing `ErrorHandler#handleError()` implementations are not adapted
to service worker registration errors and it might result in broken apps or
bad UI.
Passing to `ErrorHandler` is desirable for some and undesirable for others and
the same is true for passing to `console.error()`.
But `console.error()` was used for a long time and thus it is preferable to keep
it as long as a good solution is not found with `ErrorHandler`.
Right now it's hard to define a good solution for `ErrorHandler` because:
1. Given the nature of the SW registration errors (usually outside the control
of the developer, different error messages on each browser/version, often
quite generic error messages, etc.), passing them to the `ErrorHandler` is
not particularly helpful.
2. While `ErrorHandler#handleError()` accepts an argument of type `any` (so
theoretically we could pass any object without changing the public API), most
apps expect an `Error` instance, so many apps could break if we changed the
shape.
3. Ideally, the Angular community want to re-think the `ErrorHandler` API
and add support for being able to pass additional metadata for each error
(such as the source of the error or some identifier, etc.). This change,
however, could potentially affect many apps out there, so the community must
put some thought into it and design it in a way that accounts for the needs
of all packages (not just the SW).
4. Given that we want to more holistically revisit the `ErrorHandler` API, any
changes we make in the short term to address the issue just for the SW will
make it more difficult/breaky for people to move to a new API in the future.
To see the whole explanation see GitHub PR #40236.
PR Close#40236
In `ViewEncapsulation.Emulated` mode, the compiler must generate additional
combinations of selectors to handle the `:host-context()` pseudo-class function.
Previously, when there is was more than one `:host-context()` selector in a
rule, the compiler was generating invalid selectors.
This commit generates all possible combinations of selectors needed to
match the same elements as the native `:host-context()` selector.
Fixes#19199
PR Close#40494
When a source-map has an inline source, any source-map linked from
that source should only be loaded if itself is also inline; it should not
attempt to load a source-map from the file-system. Otherwise we can
find ourselves with inadvertent infinite cyclic dependencies.
For example, if a transpiler takes a file (e.g. index.js) and generates
a new file overwriting the original file - capturing the original
source inline in the new source-map (index.js.map) - the source
file loader might read the inline original file (also index.js) and
then try to load the `index.js.map` file from disk - ad infinitum.
Note that the first call to `loadSourceFile()` is special, since you can
pass in the source-file and source-map contents directly as in-memory
strrngs. This is common if the transpiler has just generated these and has
not yet written them to disk.
When the contents are passed into `loadSourceFile()` directly, they are
not treated as "inline" for the purposes described above since there is
no chance of these "in-memory" source and source-map contents being caught
up in a cyclic dependency.
Fixes#40408
PR Close#40435
rxjs was only used within one location within the static queries migration to workaround
a previous limitation that schematics could not directly use a promise. However, promise
support has been available since 8.0. This change removes the observable promise wrapping.
It also removes an any cast that was previously needed to workaround rxjs version mismatches
during compilation.
PR Close#38657
For the Google Cloud Console within Google we observed errors in the
shallowEqual function for users in IE and Edge. This patch was made within
Google and the errors went away. This commit upstreams the change into Angular.
PR Close#40488
This commits adds additional expectations to verify that the bloom
filter is able to correctly handle token IDs that exceed the size of
the bloom filter (which is currently 256 bits).
PR Close#40489
Jessica Janiuk