This commit fixes a bug when `useAbsoluteUrl` is set to true and
`ServerPlatformLocation` infers the base url from the supplied
`url`. User should explicitly set the `baseUrl` when they turn on
`useAbsoluteUrl`.
Breaking change:
If you use `useAbsoluteUrl` to setup `platform-server`, you now need to
also specify `baseUrl`.
We are intentionally making this a breaking change in a minor release,
because if `useAbsoluteUrl` is set to `true` then the behavior of the
application could be unpredictable, resulting in issues that are hard to
discover but could be affecting production environments.
PR Close#39334
(cherry picked from commit 7768aeb62f)
Perviously, it was not immediately clear what branches a PR would merge
into during the merge process. This prompt allows for caretakers to
understand and acknowledge where the PR will merge to.
PR Close#39333
Because the compiler-cli tests modify node_modules, this can cause
failures on windows CI specifically as node_modules are symlinked
to rather than copied. By running the test and build actions in
separate commands, all of the tests are built to be executed before
and tests are executed and modify the node_modules content.
PR Close#39289
This commit edits the copy of the attribute binding documentation, moves the
colspan section that is primarily about property binding to the property
binding document, and adds a docregion to the attribute-binding
example to help clarify a point in the document.
Part of the copy edit reformats the style precedence list in tabular format
so that it is easier to read and understand.
PR Close#38860
This tool can be run from anywhere in the aio folder as:
```sh
yarn create-example <example-name>
```
It will create some basic scaffold files to get the example started.
After creation the developer should then use `yarn boilerplate:add`
or similar to ensure that the example can be run and tested.
You can optionally provide an absolute path to a pre-existing CLI
project and it will copy over appropriate files (ignoring boilerplate)
to the newly created example.
```sh
yarn create-example <example-name> /path/to/other/cli/project
```
Fixes#39275
PR Close#39283
When reading globals such as `ngDevMode` the read should be guarded by `typeof ngDevMode` otherwise it will throw if not
defined in `"use strict"` mode.
PR Close#36055
getCheckNoChangesMode was discovered to be unclear as to the purpose of
it. This refactor is a simple renaming to make it much clearer what that
method and property does.
PR Close#39277
Previously, temporary branches were created to be used for comparison to
the g3 branch, instead comparisons are now done using the branches
latest shas.
PR Close#39137
The Displaying Data in Views topic is actually a small tutorial
that describes Angular features such as interpolation and
structural directives. These content is already covered in
our getting started tutorial and in Tour of Heroes.
This change adds redirects to the Template Syntax section
of the Getting Started tutorial and deletes displaying-data.md.
PR Close#38885
This commit updates micro benchmarks to use relative path to Ivy runtime code. Keeping absolute
locations caused issues with build optimizer that retained certain symbols and they appeared in the
output twice.
PR Close#39142
This commit adds micro benchmarks to run micro benchmarks for i18n-related logic in the
following scenarios:
- i18n static attributes
- i18n attributes with interpolations
- i18n blocks of static text
- i18n blocks of text + interpolations
- simple ICUs
- nested ICUs
First 4 scenarios also have baseline scenarios (non-i18n) so that we can compare i18n perf with
non-i18n logic.
PR Close#39142
Rather than setting up windows by relying on attaching the saved workspace
failes from the previous step, instead checkout and install the yarn items
within the windows steps. Additionally, since the bazel remote cache is
used and relied on, saving the cached results of the bazel runs to be resumed
on subsequent runs does not provide enough value to make it worth the time
consumed.
PR Close#39139
Previously windows CI jobs were only run on upstream branches, with the addition
of larger Windows executors as well as the improvement of setup speed in the
windows environment setup script allows for the windows tests to pass in a
reasonable timeframe.
PR Close#39139
Previously, inline exports of the form `exports.foo = <implementation>;` were
being interpreted (by the ngtsc `PartialInterpeter`) as `Reference` objects.
This is not what is desired since it prevents the value of the export
from being unpacked, such as when analyzing `NgModule` declarations:
```
exports.directives = [Directive1, Directive2];
@NgImport({declarations: [exports.directives]})
class AppModule {}
```
In this example the interpreter would think that `exports.directives`
was a reference rather than an array that needs to be unpacked.
This bug was picked up by the ngcc-validation repository. See
https://github.com/angular/ngcc-validation/pull/1990 and
https://circleci.com/gh/angular/ngcc-validation/17130
PR Close#39272
Some inline declarations are of the form:
```
exports.<name> = <implementation>;
```
In this case the declaration `node` is `exports.<name>`.
When interpreting such inline declarations we actually want
to visit the `implementation` expression rather than visiting
the declaration `node`.
This commit adds `implementation?: ts.Expression` to the
`InlineDeclaration` type and updates the interpreter to visit
these expressions as described above.
PR Close#39272
Previously the `node.name` property was only checked to ensure it was
defined. But that meant that it was a `ts.BindingName`, which also includes
`ts.BindingPattern`, which we do not support. But these helper methods were
forcefully casting the value to `ts.Identifier.
Now we also check that the `node.name` is actually an `ts.Identifier`.
PR Close#38959
PR Close#39272
Previously directive "queries" that relied upon a namespaced type
```ts
queries: {
'mcontent': new core.ContentChild('test2'),
}
```
caused an error to be thrown. This is now supported.
PR Close#38959
PR Close#39272
Previously, any declarations that were defined "inline" were not
recognised by the `UmdReflectionHost`.
For example, the following syntax was completely unrecognized:
```ts
var Foo_1;
exports.Foo = Foo_1 = (function() {
function Foo() {}
return Foo;
})();
exports.Foo = Foo_1 = __decorate(SomeDecorator, Foo);
```
Such inline classes were ignored and not processed by ngcc.
This lack of processing led to failures in Ivy applications that relied
on UMD formats of libraries such as `syncfusion/ej2-angular-ui-components`.
Now all known inline UMD exports are recognized and processed accordingly.
Fixes#38947
PR Close#38959
PR Close#39272
Previously these tests were checking multiple specific expression
types. The new helper function is more general and will also support
`PropertyAccessExpression` nodes for `InlineDeclaration` types.
PR Close#38959
PR Close#39272
Previously the `ConcreteDeclaration` and `InlineDeclaration` had
different properties for the underlying node type. And the `InlineDeclaration`
did not store a value that represented its declaration.
It turns out that a natural declaration node for an inline type is the
expression. For example in UMD/CommonJS this would be the `exports.<name>`
property access node.
So this expression is now used for the `node` of `InlineDeclaration` types
and the `expression` property is dropped.
To support this the codebase has been refactored to use a new `DeclarationNode`
type which is a union of `ts.Declaration|ts.Expression` instead of `ts.Declaration`
throughout.
PR Close#38959
PR Close#39272
This makes these tests more resilient to changes in the test code
structure. For example switching from
```
var SomeClass = <implementation>;
exports.SomeClass = SomeClass;
```
to
```
exports.SomeClass = <implementation>;
```
PR Close#38959
PR Close#39272
Previously `getDeclaration()` would only return the first node that matched
the name passed in and then assert the predicate on this single node.
It also only considered a subset of possible declaration types that we might
care about.
Now the function will parse the whole tree collecting an array of all the
nodes that match the name. It then filters this array based on the predicate
and only errors if the filtered array is empty.
This makes this function much more resilient to more esoteric code formats
such as UMD.
PR Close#38959
PR Close#39272
The new function does not try to restrict the kind of AST node that it
finds, leaving that to the caller. This will make it more resuable in the
UMD reflection host.
PR Close#38959
PR Close#39272
Sometimes UMD exports appear in the following form:
```
exports.MyClass = alias1 = alias2 = <<declaration>>
```
Previously the declaration of the export would have been captured
as `alias1 = alias2 = <<declaration>>`, which the `PartialInterpreter`
would have failed on, since it cannot handle assignments.
Now we skip over these aliases capturing only the `<<declaration>>`
expression.
Fixes#38947
PR Close#38959
PR Close#39272
UMD files export values by assigning them to an `exports` variable.
When evaluating expressions ngcc was failing to cope with expressions
like `exports.MyComponent`.
This commit fixes the `UmdReflectionHost.getDeclarationOfIdentifier()`
method to map the `exports` variable to the current source file.
PR Close#38959
PR Close#39272
The `SIMPLE_CLASS_FILE` contained a `ChildClass` that had an
internal aliases implementation and extended a `SuperClass` base
class. The call to `__extends` was using the wrong argument for
the child class.
PR Close#38959
PR Close#39272
Andrew Kushnir