Add an internal API to enable and use i18n hydration for testing and development. This helps ensure that we don't accidentally break the current behavior until we are completely ready to roll out i18n support.
PR Close#54784
Currently if an `(output)` listener fails, it will be handled gracefully
by Angular and reported to the `ErrorHandler`.
For programmatic subscriptions with `OutputEmitterRef`, this is not the case.
Instead, as soon as any subscription is failing, all other subsequent
subscription callbacks are not firing anymore.
This commit intends to make this more consistent by gracefully
reporting errors from `OutputEmitterRef#emit` to `ErrorHandler`,
allowing for listener execution to continue.
PR Close#54821
Returning `UrlTree` from a guard was a convenient new feature added to
the `Router`. However, it does not have feature-parity with the old
`router.navigate(...); return false;` pattern. The most common use-case
for this feature is to redirect to a new page _without_ updating the URL
from the initially attempted navigation. For example, rendering a 404
page when the user does not have access privelages to a route.
Fixes#17004Fixes#27148
BREAKING CHANGE: Guards can now return `RedirectCommand` for redirects
in addition to `UrlTree`. Code which expects only `boolean` or `UrlTree`
values in `Route` types will need to be adjusted.
PR Close#45023
Ensures that all of the functions intended to be run in initializers are in an injection context. This is a stop-gap until we have a compiler diagnostic for it.
PR Close#54761
Speeds up the retrieval of `DestroyRef` in `EventEmitter` because
`try/catch` is expensive if there is no injection context.
We saw a script time regression in Cloud.
The goldens had to be updated because `getInjectImplementation` is now
referenced. `inject` also references the underlying field, but directly.
This is super minimal overhead of a function exposing the internal
field.
PR Close#54748
This commit updates `ApplicationRef.tick` to use `detectChangesInternal` for root
views rather than go through the `ChangeDetectorRef.detectChanges` API
which refreshes the host view without first looking at whether the view
is `OnPush` and not dirty. The current behavior would hide errors in
`OnPush` components that do not correctly get marked for check and would
break when migrating to zoneless change detection because `markForCheck`
was never called so change detection was never scheduled.
The error would be surprising and blamed on switching to zoneless when in
reality the issue already exists and is a problem with the component not
calling `markForCheck`. However, this error is hidden today because
`ApplicationRef.tick` refresh host bindings unconditionally.
BREAKING CHANGE: `OnPush` views at the root of the application need to
be marked dirty for their host bindings to refresh. Previously, the host
bindings were refreshed for all root views without respecting the
`OnPush` change detection strategy.
PR Close#53718
PR Close#53718
This commit updates HTML sanitization logic to avoid infinite loops in case clobbered elements contain fields like `nextSibling` or `parentNode`. Those fields are used for DOM traversal and this update makes sure that those calls return valid results.
Also this commit fixes an issue when clobbering `nodeName` causes JS exceptions.
PR Close#54425
Updates the instruction generation for two-way bindings to only emit the `twoWayBindingSet` call when writing to template variables. Since template variables are constants, it's only allowed to write to them when they're signals. Non-signal values are flagged during template type checking.
Fixes#54670.
PR Close#54714
This commit ensures that render hooks are rerun when a node is attached
or detached. We do not necessarily need to run change detection but DOM
did change so render hooks should execute.
PR Close#54083
This commit updates `ApplicationRef.tick` to use `detectChangesInternal` for root
views rather than go through the `ChangeDetectorRef.detectChanges` API
which refreshes the host view without first looking at whether the view
is `OnPush` and not dirty. The current behavior would hide errors in
`OnPush` components that do not correctly get marked for check and would
break when migrating to zoneless change detection because `markForCheck`
was never called so change detection was never scheduled.
The error would be surprising and blamed on switching to zoneless when in
reality the issue already exists and is a problem with the component not
calling `markForCheck`. However, this error is hidden today because
`ApplicationRef.tick` refresh host bindings unconditionally.
BREAKING CHANGE: `OnPush` views at the root of the application need to
be marked dirty for their host bindings to refresh. Previously, the host
bindings were refreshed for all root views without respecting the
`OnPush` change detection strategy.
PR Close#53718
In order to serialize and hydrate i18n blocks, we need to be able to walk an AST for the translated message. This AST is generated during normal parsing of the message.
PR Close#54724
When a view has the `Dirty` flag and is reattached, we should ensure that it is
reached and refreshed during the next change detection run from above.
In addition, when a view is created and attached, we should ensure that it is reached
and refreshed during change detection. This can happen if the view is
created and attached outside a change run or when it is created and
attached after its insertion view was already checked. In both cases, we
should ensure that the view is reached and refreshed during either the
current change detection or the next one (if change detection is not
already running).
We can achieve this by creating all views with the `Dirty` flag set.
However, this does happen to be a breaking change in some scenarios.
The one identified internally was actually depending on change detection
_not_ running immediately because it relied on an input value that was
set using `ngModel`. Because `ngModel` sets its value in a `Promise`, it
is not available until the _next_ change detection cycle. Ensuring
created views run in the current change change detection will result in
different behavior in this case.
fixes#52928fixes#15634
BREAKING CHANGE: Newly created and views marked for check and reattached
during change detection are now guaranteed to be refreshed in that same
change detection cycle. Previously, if they were attached at a location
in the view tree that was already checked, they would either throw
`ExpressionChangedAfterItHasBeenCheckedError` or not be refreshed until
some future round of change detection. In rare circumstances, this
correction can cause issues. We identified one instance that relied on
the previous behavior by reading a value on initialization which was
queued to be updated in a microtask instead of being available in the
current change detection round. The component only read this value during
initialization and did not read it again after the microtask updated it.
PR Close#54735
When the `ApplicationRef` refreshes attached views, it will continue to
do so while there is still one marked for check after the refresh
completes.
BREAKING CHANGE: When Angular runs change detection, it will continue to
refresh any views attached to `ApplicationRef` that are still marked for
check after one round completes. In rare cases, this can result in infinite
loops when certain patterns continue to mark views for check using
`ChangeDetectorRef.detectChanges`. This will be surfaced as a runtime
error with the `NG0103` code.
PR Close#54734
An `EventEmitter` is a construct owned by Angular that should be
used for outputs as of right now.
As we are introducing the new `OutputRef` interface for the new output
function APIs, we also think `EventEmitter` should implement
`OutputRef`— ensuring all "known" outputs follow the same contract.
This commit ensures `EventEmitter` implements an `OutputRef`
Note: An output ref captures the destroy ref from the current injection
context for clean-up purposes. This is also done for `EventEmitter` in a
backwards compatible way:
- not requiring an injection context. EventEmitter may be used
elsewhere.
- not cleaning up subscriptions/completing the emitter when the
directive/component is destroyed. This would be a change in behavior.
Note 2: The dependency on `DestroyRef` causes it to be retained in all
bundling examples because ironically `NgZone` uses `EventEmitter`- not
for outputs. The code is pretty minimal though, so that should be
acceptable.
`EventEmitter` will now always retain `NgZone. This increases the
payload size slightly around 800b for AIO. Note that the other increases
were coming from previous changes. This commit just pushed it over the
threshold.
PR Close#54650
A model signal is technically an output, at runtime and conceptually.
This commit re-uses the shared output ref logic and ensures the
interfaces match.
PR Close#54650
This commit exposes the new `output()` API with numerous benefits:
- Symmetrical API to `input()`, `model()` etc.
- Fixed types for `EventEmitter.emit`— current `emit` method of
`EventEmitter` is broken and accepts `undefined` via `emit(value?: T)`
- Removal of RxJS specific concepts from outputs. error channels,
completion channels etc. We now have a simple consistent
interface.
- Automatic clean-up of subscribers upon directive/component destory-
when subscribed programmatically.
```ts
@Directive({..})
export class MyDir {
nameChange = output<string>(); // OutputEmitterRef<string>
onClick = output(); // OutputEmitterRef<void>
}
```
Note: RxJS custom observable cases will be handled in future commits via
explicit helpers from the interop.
PR Close#54650
This commit updates TestBed logic to take into account situations when dependencies loaded within `@defer` blocks may import NgModules with providers. For such components, we invoke provider override function, which recursively inspects and applies the necessary changes.
PR Close#54667
In zone-full applications, this is already true because effects are
scheduled inside a microtask and tracked by ZoneJS. When not using
zones, this should stay consistent on principle and for testability
reasons. A general pattern with zoneless testing will be to update state
and `await` some promise (i.e. `fixture.whenStable`, which will be
linked to `ApplicationRef.isStable`).
PR Close#53835
The current behavior of `autoDetect` in `ComponentFixture` does not
match production very well. It has several flaws that make it an
insufficient change detection mechanism:
* It runs change detection for the component under test _after_ views
attached to the `ApplicationRef`. This can cause real behavior
differences that break in production, because tests can observe view
refreshes in the incorrect order (for example, a dialog refreshing
before the component which opened it).
* Because of the above ordering, render hooks registered during change
detection of the fixture views _will not execute at all_ because
`ApplicationRef.tick` already happen.
* It does not rerun change detection on the view tree if there are more
dirty views to refresh after the render hooks complete.
* It effectively hides/swallows errors from change detection inside the
`onMicrotaskEmpty` subscription by not reporting them to the error
handler. Instead, this error ends up being unhandled in the
subscription and rxjs throws these in a `setTimeout`.
All of the above are problematic but this commit _does not_ fix the
final point. Ideally, we can land this in a future change but this
requires additional internal fixes. In the meantime, we have to juggle
special-case handling of the component fixture views within
`ApplicationRef.tick` using some special events to retain current
behavior and avoid errors from the fixture propagating to the `ErrorHandler`.
breaking note for future when isG3 flag condition is removed for v18:
The `ComponentFixture.autoDetect` feature now executes
change detection for the fixture within `ApplicationRef.tick`. This more
closely matches the behavior of how a component would refresh in
production. The order of component refresh in tests may be slightly
affected as a result, especially when dealing with additional components
attached to the application, such as dialogs. Tests sensitive to this
type of change (such as screenshot tests) may need to be updated.
PR Close#54354
One downside of implicit dependency tracking in `effect()`s is that it's easy
to for downstream code to end up running inside the effect context by accident.
For example, if an effect raises an event (e.g. by `next()`ing a `Subject`), the
subscribers to that `Observable` will run inside the effect's reactive context,
and any signals read within the subscriber will end up as dependencies of the
effect. This is why the `untracked` function is useful, to run certain
operations without incidental signal reads ending up tracked.
However, knowing when this is necessary is non-trivial. For example, injecting
a dependency might cause it to be instantiated, which would run the constructor
in the effect context unless the injection operation is untracked.
Therefore, Angular will automatically drop the reactive context within a number
of framework APIs. This commit addresses these use cases:
* creating and destroying views
* creating and destroying DI injectors
* injecting dependencies
* emitting outputs
Fixes#54548
There are likely other APIs which would benefit from this approach, but this
is a start.
PR Close#54614
Angular has the `@Attribute` decorator that allows for attributes to be injected from the host node, but we don't have an equivalent for the `inject` function. These changes introduce the new `HostAttributeToken` class that can be used to inject attributes similarly to `@Attribute`. It can be used as follows:
```typescript
import {HostAttributeToken, inject} from '@angular/core';
class MyDir {
someAttr = inject(new HostAttributeToken('some-attr'));
}
```
The new API works similarly to `@Attribute` with one key exception: it will throw a DI error when the attribute doesn't exist, instead of returning `null` like `@Attribute`. We made this change to align its behavior closer to other injection tokens.
PR Close#54604
This commit ensures that any internal render hooks that cause views to
become dirty again first refresh those dirty views before running user
render hooks. This ensures that user render hooks have the most complete
render state possible and stops them from needlessly executing multiple
times. This is important to maintain the goal of the public render
hooks, which is to provide the safest place to place code that depends
on DOM state, especially in ways that may force a browser paint.
PR Close#54224
Fixes that initializer functions weren't being recognized if they are aliased (e.g. `import {model as alias} from '@angular/core';`).
To do this efficiently, I had to introduce the `ImportedSymbolsTracker` which scans the top-level imports of a file and allows them to be checked quickly, without having to go through the type checker. It will be useful in the future when verifying that that initializer APIs aren't used in unexpected places.
I've also introduced tests specifically for the `tryParseInitializerApiMember` function so that we can test it in isolation instead of going through the various functions that call into it.
PR Close#54609
Currently, when a `@defer` block contains standalone components that import NgModules with providers, those providers are not available to components declared within the same NgModule. The problem is that the standalone injector is not created for the host component (that hosts this `@defer` block), since dependencies become defer-loaded, thus no information is available at host component creation time.
This commit updates the logic to collect all providers from all NgModules used as a dependency for standalone components used within a `@defer` block. When an instance of a defer block is created, a new environment injector instance with those providers is created.
Resolves#52876.
PR Close#52881
Fixes that initializer functions weren't being recognized if they are aliased (e.g. `import {model as alias} from '@angular/core';`).
To do this efficiently, I had to introduce the `ImportedSymbolsTracker` which scans the top-level imports of a file and allows them to be checked quickly, without having to go through the type checker. It will be useful in the future when verifying that that initializer APIs aren't used in unexpected places.
I've also introduced tests specifically for the `tryParseInitializerApiMember` function so that we can test it in isolation instead of going through the various functions that call into it.
PR Close#54480
Template pipeline is now the default template compiler.
A pair of source map tests is failing, related to DI in JIT mode; I will fix and re-enable these during the preview period.
PR Close#54571
ApplicationRef.tick has a loop that will refresh views again that have
an updated signal. This change ensures views marked with the `Dirty`
flag are also considered in this loop, but only inside g3 for now
because this may be considered a breaking change and we need to wait for
v18 to land externally.
PR Close#54572
Prior to this fix an incorrect view instance (a dynamically created component
one instead of the root view) was passed to the content query function. Having
incorrect view instance meant that a component instance could not be found.
This is a pre-existing bug, introduction of signal-based queries just surfaced it.
Fixes#54450
PR Close#54457
Getting the typing for `ɵunwrapWritableSignal` just right was tricky so these changes add some tests to ensure that we don't regress.
Also reworks the type tester a bit to make it easier to find where to add new test files.
PR Close#54387
Assure that the same readonly array corresponding to the children query results
is returned for cases where a query is marked as dirty but there were no actual
changes to the content of the results array (this can happen if a view is added
and removed thus marking queries as dirty but not influencing final results).
Fixes#54376
PR Close#54392
The newly introduced signal queries would error if no match exists, due to an
invalid read within the query internals.
This commit addresses the crash by allowing there to be no matches.
PR Close#54353
This updates some tests to use the public imports from `@angular/core` now that they are available,
and cleans up useless imports and inaccurate names.
PR Close#54334
In some situations, calling `markForCheck` can result in an infinite
loop in seemingly valid scenarios. When a transplanted view is inserted
before its declaration, it gets refreshed in the retry loop of
`detectChanges`. At this point, the `Dirty` flag has been cleared from
all parents. Calling `markForCheck` marks the insertion tree up to the
root `Dirty`. If the declaration is checked again as a result (i.e.
because it has default change detection) and is reachable because its
parent was marked `Dirty`, this can cause an infinite loop. The
declaration is refreshed again, so the insertion is marked for refresh
(again). We enter an infinite loop if the insertion tree always calls
`markForCheck` for some reason (i.e. `{{createReplayObservable() | async}}`).
While the case above does fall into an infinite loop, it also truly is a
problem in the application. While it's not an infinite synchronous loop,
the declaration and insertion are infinitely dirty and will be refreshed
on every change detection round.
Usually `markForCheck` does not have this problem because the `Dirty`
flag is not cleared until the very end of change detection. However, if
the view did not already have the `Dirty` flag set, it is never cleared
because we never entered view refresh. One solution to this problem
could be to clear the `Dirty` flag even after skipping view refresh but
traversing to children.
PR Close#54329
Fixes that `ɵunwrapWritableSignal` inferring getter functions as not matching the interface of `WritableSignal` instead of preserving them.
PR Close#54252
In a previous commit the TCB was changed to cast the assignment to an input in order to widen its type to allow `WritableSignal`. This ended up breaking existing inputs whose setter has a wider type than its getter. These changes switch to unwrapping the value on the binding side.
PR Close#54252
Gerald Monaco