Claude models are served on /messages, which the OpenAI SDK can't speak, so
those runs go through LiteLLM's Anthropic route instead. Prompt caching moves
with them, since LiteLLM consumes the injection points the raw SDK rejects.
Zen and Go now show up by name instead of both reading 'OpenCode
subscription', and Zen keeps its cost tracked: it bills prepaid credits per
request, so those runs were never actually free.
* add extra-files plumbing so orchestrators can drop single files into the sandbox workspace
* reject extra-file paths that collide with a local source tree
* add --workspace-file so CLI users can place files in the sandbox workspace
* reject repeated and control-character workspace paths
* revalidate persisted workspace files when resuming a run
* drop the workspace-file size limit
* fix: resolve pre-commit check failures
- Change RuntimeError to TypeError for type validation in report/writer.py
- Update pyupgrade to v3.21.2 for Python 3.14 compatibility
* chore: add pytest test infrastructure
Mirror the layout introduced on feature/438-token_budget: pytest +
pytest-asyncio dev deps, asyncio_mode auto, a tests.* mypy override, and
pytest in the mypy pre-commit hook deps so the tests/ package type-checks.
* feat: add --mount and large-target pre-flight for local repos (#492)
Large local targets were copied into the sandbox file-by-file via the SDK
LocalDir entry, which stalls on big repos and could leave /workspace empty.
- --mount <path> bind-mounts a host directory read-only at /workspace/<subdir>
instead of copying it, bypassing the per-file stream.
- A size pre-flight (STRIX_MAX_LOCAL_COPY_MB, default 1024) fails fast with a
clear message suggesting --mount when a non-mounted local target is too big.
* fix: reject empty --mount paths
An empty or whitespace-only --mount value resolves to the current working
directory and would silently bind-mount it into the sandbox. Reject it.
* fix: dedupe local targets so a dir is never both copied and mounted
If the same directory is passed via --target and --mount (or as duplicate
values), it previously produced two targets — copied AND bind-mounted, and
the copied one could trip the size pre-flight. Dedupe by resolved path,
preferring the bind mount.
* fix: treat non-positive STRIX_MAX_LOCAL_COPY_MB as disabled
Previously a value of 0 (or negative) made every local target count as
oversized, aborting all local scans. Now <= 0 disables the pre-flight.
* fix: log unreadable subtrees during size pre-flight
os.walk silently swallowed directory-listing errors, so a permission-denied
subtree could make a large repo under-count and slip past the pre-flight.
Surface such omissions via an onerror warning.
* docs: document --mount and STRIX_MAX_LOCAL_COPY_MB
Add CLI reference + example for --mount, document the size pre-flight env var,
note the read-only-is-not-a-hard-boundary caveat and that remote repos are not
size-checked, and clarify the backends docstring on when bind mounts apply.
* Update strix/interface/main.py
* Update strix/runtime/docker_client.py
---------
Five rounds of sweep across the tree. Net ~544 lines removed.
Removed:
- Section-divider banners and one-line section labels (# Display
utilities, # ----- list_requests -----, # CVSS breakdown, etc.).
- Module-level prose docstrings on internal modules. Kept one-line
summaries; trimmed multi-paragraph narration about SDK/Strix
responsibility splits, cache strategies, three-source precedence.
- Internal-helper docstrings that just restate the function name —
caido_api helpers (caido_url, get_client, view_request, etc.),
settings-class one-liners (LLMSettings, RuntimeSettings, ...),
UI helper docstrings.
- Args/Returns blocks on non-LLM-facing internal helpers
(build_strix_agent, render_system_prompt, create_or_reuse,
bootstrap_caido) — kept only the genuinely non-obvious params.
- Internal-history phrasing — "Mirrors main-branch shape",
"pre-SDK harness", "previous lookup matched no attribute".
- Narrative comments inside function bodies that explained what the
next line does, design rationale obvious from the surrounding code,
or "we used to..." asides.
- Trailing periods on every error-string literal across the tool tree.
- Duplicated roundtripTime quirk comment (kept the LLM-facing copy in
tools/proxy/tools.py).
Kept (every one names an upstream bug, vendored-code provenance, or
non-obvious data quirk):
- core/runner.py: SDK replay-with-empty-initial-input + on_agent_end
lifecycle gap.
- runtime/docker_client.py: VERBATIM COPY block of the upstream
_create_container body, pinned to SDK v0.14.6.
- runtime/session_manager.py: NO_PROXY for agent-browser CDP loopback.
- tools/proxy/caido_api.py: generated-pydantic Request.raw quirk,
replay double-history pitfall.
- tools/proxy/tools.py: Caido roundtripTime=0 quirk for proxy
captures.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
When a scan ends without calling ``finish_scan`` (Ctrl+C, TUI quit,
crash), ``display_completion_message`` now appends one extra line
inside the existing completion panel:
Resume strix --run-name <run_name>
Same ``dim``-label / coloured-value styling as the panel's ``Target``
and ``Output`` rows. Only rendered when ``scan_completed`` is False —
a finished scan doesn't need a resume nudge.
Triggers ``orchestration/scan.py``'s implicit-resume path on the next
invocation (presence of ``{run_dir}/bus.json`` is the trigger), so
the user gets back exactly where they left off — root + every
non-terminal subagent's full LLM history, bus topology, prior
findings.
Covers both ``run_cli`` and ``run_tui`` paths since
``display_completion_message`` is called from ``main()`` regardless
of which front-end ran.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
When the user shuts down a run (Ctrl+C in CLI, Ctrl+Q / quit dialog
in TUI, or an uncaught exception during the scan), print a Rich
panel telling them the exact command to pick up where they left off:
strix --run-name <run_name>
The panel only appears when ``strix_runs/<run_name>/bus.json``
exists — i.e. the scan registered at least the root agent and has
snapshot state worth resuming from. Suppressed when:
* No run-name was assigned (Ctrl+C before sandbox bring-up).
* The run dir doesn't exist or has no bus.json yet.
Implementation:
* ``strix/interface/utils.py`` gains ``format_resume_hint(run_name)
-> Panel | None``.
* ``cli.py`` calls it in the SIGINT/SIGTERM/SIGHUP handler before
``sys.exit(1)``, and in the ``except Exception`` arm before the
re-raise.
* ``tui.py:run_tui`` calls it in a ``finally`` after
``app.run_async()`` so the hint lands on the real terminal once
Textual has restored it (whether the user pressed Ctrl+Q,
confirmed the quit dialog, or the run completed naturally).
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Replaces 200+ lines of bespoke env-loader / persist / change-detection
machinery with ``pydantic_settings.BaseSettings`` (already a transitive
of ``openai-agents → mcp``, no new direct dep).
What was wrong with ``Config``:
- 14 knobs flat in one namespace, weak grouping by comment-block.
- ``Config._applied_from_default`` and ``Config._config_file_override``
were externally mutated from ``interface/main.py:532-534``. Private
members were part of the public contract.
- Stringly-typed values: every caller had to coerce
(``int(Config.get("llm_timeout") or "300")``,
``... not in {"0", "false", "no", "off"}``).
- Dead knob: ``strix_llm_max_retries`` declared, persisted, listed in
``_LLM_CANONICAL_NAMES`` — zero readers (``DEFAULT_RETRY``
hardcodes ``max_retries=5``). Dropped.
- ``_LLM_CANONICAL_NAMES`` tuple maintained alongside class vars —
duplicate source of truth.
- ``_tracked_names()`` introspected ``vars(cls).items()`` filtered on
``(v is None or isinstance(v, str))`` — fragile.
- Awkward path: ``strix/config/config.py`` inside ``strix/config/``
with ``__init__.py`` just re-exporting.
- Dual access for the same fact: ``web_search`` read
``os.getenv("PERPLEXITY_API_KEY")`` while ``main.py`` read
``Config.get("perplexity_api_key")``.
New shape:
- ``strix/config/settings.py`` — typed dataclass tree:
``Settings.{llm,runtime,telemetry,integrations}``. Each sub-model is
its own ``BaseSettings`` so it reads env independently. Field-level
``alias=`` and ``validation_alias=AliasChoices(...)`` mirror the
existing flat env-var names — user-facing env contract is unchanged.
Bool fields auto-parse ``"0"``/``"false"``/``"no"``/``"off"``;
int fields auto-coerce.
- ``strix/config/loader.py`` — thin ``load_settings()``,
``apply_config_override(path)``, ``persist_current()`` with module
cache. JSON file reader walks aliases to populate sub-models, dropping
entries already covered by env (so env still wins).
- 13 callsites migrated from ``Config.get("...")`` to
``load_settings().<group>.<field>``.
- ``posthog._is_enabled()`` collapses to one line.
- ``--config <path>`` flow simplified: one
``apply_config_override(...)`` call replaces three lines of
class-private mutation.
Drive-by — drop ``is_whitebox`` from ``scan_config`` dict:
- It was being derived as ``bool(args.local_sources)`` in three places
(``cli.py``, ``tui.py``, ``main.py``) and stuffed into the dict for
``entry.py`` to read back. The fact is fully derivable from
``scan_config["targets"]`` — any target with ``type == "local_code"``.
- New helper ``is_whitebox_scan(targets)`` in ``interface/utils.py``
alongside the other target-classification utilities.
- ``entry.py`` computes once; ``main.py``'s posthog start uses the same
helper. Triplicate derivation gone.
Verified: ruff at baseline (3), mypy at baseline (69). Six smoke tests
pass — defaults / JSON-only / env-wins-over-JSON / alias-chain
fallback / bool parsing / ``is_whitebox_scan``.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
The SDK harness is the only path now; legacy host-side code is gone.
File names no longer carry the ``sdk_`` distinction.
Deleted legacy host-side modules:
- strix/agents/StrixAgent/ (template moved to strix/agents/prompts/)
- strix/agents/base_agent.py, state.py
- strix/llm/llm.py, config.py
- strix/runtime/docker_runtime.py, runtime.py
- strix/tools/executor.py, agents_graph/agents_graph_actions.py
- strix/interface/sdk_dispatch.py + the env-flag dispatch in cli.py
Renamed (drop ``sdk_`` prefix):
- strix/sdk_entry.py → strix/entry.py
- strix/agents/sdk_factory.py → strix/agents/factory.py
- strix/agents/sdk_prompt.py → strix/agents/prompt.py
- strix/tools/<x>/<x>_sdk_tool[s].py → strix/tools/<x>/tool[s].py
- strix/tools/_legacy_adapter.py → strix/tools/_state_adapter.py
- ``_legacy`` aliases inside the wrappers → ``_impl``
CLI + TUI now call ``run_strix_scan`` directly — they build the
sandbox image / sources_path locally and rely on
``session_manager.cleanup`` (called inside ``run_strix_scan``'s finally)
for teardown. Three TUI handlers that reached into legacy multi-agent
globals (``_agent_instances``, ``send_user_message_to_agent``,
``stop_agent``) are now no-ops with a TODO; reconnecting them to the
``AgentMessageBus`` is a follow-up.
Tracer.get_total_llm_stats no longer reaches into the deleted
``agents_graph_actions`` globals — the orchestration hooks now feed the
tracer via ``Tracer.record_llm_usage`` (live + completed buckets).
finish_scan's ``_check_active_agents`` and load_skill's runtime
``_agent_instances`` reach-in are no-op stubs; the
``AgentMessageBus`` is the source of truth post-migration.
llm/utils.py rewritten to keep only the streaming-parser helpers
(``normalize_tool_format``, ``parse_tool_invocations``,
``fix_incomplete_tool_call``, ``format_tool_call``, ``clean_content``).
``STRIX_MODEL_MAP`` moved to ``llm/multi_provider_setup.py`` (its only
remaining caller).
Per-file ruff ignores added for legacy interface modules (TUI / main /
CLI / utils / streaming_parser / tool_components) and tracer.py —
pre-existing PLC0415/BLE001/PLR0915 patterns are out of scope.
Tests: 287/287 passing. Renamed test files to drop ``sdk_`` prefix.
``test_tracer.py::test_get_total_llm_stats_aggregates_live_and_completed``
rewritten to feed ``Tracer.record_llm_usage`` instead of legacy globals.
Test file annotations added so pre-commit's strict mypy passes.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Adds the env-var gate that lets users opt into the SDK harness without
disturbing the legacy default. Per PLAYBOOK §7.1, this is the cutover
mechanism: STRIX_USE_SDK_HARNESS=1 routes scans through run_strix_scan
(the Phase 5 entry point); anything else continues to use
StrixAgent.execute_scan.
- strix/interface/sdk_dispatch.py:
- should_use_sdk_harness(): truthy-string parse of the env var.
- _resolve_sandbox_image(): reads strix_image from Config; falls
back to "strix-sandbox:latest" with a warning if unset.
- _resolve_sources_path(): when --local-sources is given, mounts
its parent so the agent walks down to the source tree; otherwise
creates a per-run scratch dir under XDG_CACHE_HOME/strix/sources/.
Phase 6 will replace this with the legacy clone-into-container
flow once we port that.
- run_scan_via_sdk(): the adapter — translates the legacy CLI
(scan_config dict + argparse Namespace + Tracer) into the keyword
arguments run_strix_scan expects. Returns the SDK RunResult; lets
failures bubble up.
- strix/interface/cli.py: adds the dispatch branch inside the existing
Live/status loop. Legacy default unchanged; SDK path is reached only
when STRIX_USE_SDK_HARNESS is truthy. Two pre-existing lazy imports
hoisted to module level (cleanup_runtime + sdk_dispatch helpers) so
ruff is happy.
Pre-existing legacy lint/type issues surfaced when pre-commit checked
the edited cli.py and chased imports — fixed or ignored in passing:
- utils.py:1052 duplicate ``metadata`` annotation removed.
- utils.py:1251 unused ``# type: ignore[import-not-found]`` for yarl.
- main.py:456 ``panel_parts`` inferred type rejected later string
entries — explicit ``list[Text | str]`` annotation.
- utils.py:resolve_diff_scope_context PLR0912 (16 branches) per-file
ignore — branches map 1:1 to scope-mode × target-type combinations.
Tests: 18 new tests in tests/interface/test_sdk_dispatch.py — env
flag parsing parametrized over truthy/falsy variants, image lookup
with config hit + miss-with-warning, sources path resolution for
local_sources / alternative key names / scratch-dir creation, and
the adapter's kwarg handoff verified against a patched
run_strix_scan (run_name from args + run_name from scan_config
fallback + failure propagation).
Refs: PLAYBOOK.md §7.1 (cutover), §7.2 (rollback).
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Users can now access the Caido web UI from their browser to inspect traffic,
replay requests, and perform manual testing alongside the automated scan.
- Map Caido port (48080) to a random host port in DockerRuntime
- Add caido_port to SandboxInfo and track across container lifecycle
- Display Caido URL in TUI sidebar stats panel with selectable text
- Bind Caido to 0.0.0.0 in entrypoint (requires image rebuild)
- Bump sandbox image to 0.1.12
- Restore discord link in exit screen
Replace 12 flat parameters (code_file, code_before, code_after, code_diff,
and 8 CVSS fields) with structured nested XML fields: code_locations with
co-located fix_before/fix_after per location, cvss_breakdown, and cwe.
This enables multi-file vulnerability locations, per-location fixes with
precise line numbers, data flow representation (source/sink), CWE
classification, and compatibility with GitHub/GitLab PR review APIs.
Remove hardcoded github.com/gitlab.com/bitbucket.org host lists from
infer_target_type. Instead, detect git repositories on any host by
querying the standard /info/refs?service=git-upload-pack endpoint.
Works for any self-hosted git instance.
- Reuse apply_saved() instead of custom override logic
- Add force parameter to override existing env vars
- Move validation to utils.py
- Prevent saving when using custom config (one-time override)
- Fix: don't modify ~/.strix/cli-config.json when --config is used
Co-Authored-By: FeedClogger <feedclogger@users.noreply.github.com>
Rewrite localhost/127.x.x.x/0.0.0.0 target URLs to use host.docker.internal,
allowing the container to reach services running on the host machine.
- Add extra_hosts mapping for host.docker.internal on Linux
- Add HOST_GATEWAY env var to container
- Add rewrite_localhost_targets() to transform localhost URLs
- Support full 127.0.0.0/8 loopback range and IPv6 ::1
- Reduced animation timer for splash screen to improve responsiveness.
- Added URL display to the splash screen.
- Improved start line animation with dynamic character styling.
- Updated agent status display to show "Initializing Agent" when no real activity is detected.
- Enhanced waiting and animated verb text with dynamic styling.
- Implemented sidebar visibility toggle based on window size.
- Updated live stats to include model information from agent configuration.
- Refined TUI styles for better visual consistency.
Jonathan Singer