mirror of
https://github.com/rtk-ai/rtk.git
synced 2026-09-19 07:33:17 +08:00
xiaozh
87702bf339
- summary line is authoritative for pass/fail routing and counts; a parsed failure no longer overrides "0 tests failed" (--repeat until-pass) - recognise retry result lines without the N/M prefix; the last result per test number replaces the earlier one in place - pre-result diagnostics are only claimed when the nearest boundary is a Start line, so -j runs no longer absorb other tests' result lines - failed entries are labeled "#N name (status, duration)" with their details indented beneath; empty blocks can no longer shift attribution - failed: and skipped: lists are capped at CAP_LIST with tee recovery; the duplicated CTest FAILED name list is dropped, its trailer lines are kept - failure detail keeps 2 head lines + 8 tail lines so pre-result diagnostics such as "Could not find executable" survive truncation - fixtures re-captured as stdout followed by stderr, matching runner.rs; add real -j4 and --repeat until-pass:2 captures Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
61 lines
2.2 KiB
Plaintext
61 lines
2.2 KiB
Plaintext
Test project /tmp/build
|
|
Start 1: pass_fast
|
|
1/11 Test #1: pass_fast ........................ Passed 0.00 sec
|
|
Start 2: pass_slow
|
|
2/11 Test #2: pass_slow ........................ Passed 0.31 sec
|
|
Start 3: pass_medium
|
|
3/11 Test #3: pass_medium ...................... Passed 0.11 sec
|
|
Start 4: regex_fail
|
|
4/11 Test #4: regex_fail .......................***Failed Required regular expression not found. Regex=[expected-token
|
|
] 0.01 sec
|
|
Start 5: skipped_case
|
|
5/11 Test #5: skipped_case .....................***Skipped 0.01 sec
|
|
Start 6: disabled_case
|
|
6/11 Test #6: disabled_case ....................***Not Run (Disabled) 0.00 sec
|
|
Start 7: missing_case
|
|
Could not find executable missing-command
|
|
Looked in the following places:
|
|
missing-command
|
|
missing-command
|
|
Release/missing-command
|
|
Release/missing-command
|
|
Debug/missing-command
|
|
Debug/missing-command
|
|
MinSizeRel/missing-command
|
|
MinSizeRel/missing-command
|
|
RelWithDebInfo/missing-command
|
|
RelWithDebInfo/missing-command
|
|
Deployment/missing-command
|
|
Deployment/missing-command
|
|
Development/missing-command
|
|
Development/missing-command
|
|
7/11 Test #7: missing_case .....................***Not Run 0.00 sec
|
|
Start 8: timeout_case
|
|
8/11 Test #8: timeout_case .....................***Timeout 1.06 sec
|
|
Start 9: plain_fail
|
|
9/11 Test #9: plain_fail .......................***Failed 0.00 sec
|
|
Start 10: noisy_fail
|
|
10/11 Test #10: noisy_fail .......................***Failed 0.00 sec
|
|
Start 11: discovery_fail
|
|
11/11 Test #11: discovery_fail ...................***Failed 0.00 sec
|
|
|
|
40% tests passed, 6 tests failed out of 10
|
|
|
|
Total Test time (real) = 1.52 sec
|
|
|
|
The following tests did not run:
|
|
5 - skipped_case (Skipped)
|
|
6 - disabled_case (Disabled)
|
|
|
|
The following tests FAILED:
|
|
4 - regex_fail (Failed)
|
|
7 - missing_case (Not Run)
|
|
8 - timeout_case (Timeout)
|
|
9 - plain_fail (Failed)
|
|
10 - noisy_fail (Failed)
|
|
11 - discovery_fail (Failed)
|
|
Unable to find executable: missing-command
|
|
Errors while running CTest
|
|
Output from these tests are in: /tmp/build/Testing/Temporary/LastTest.log
|
|
Use "--rerun-failed --output-on-failure" to re-run the failed cases verbosely.
|