Post-deploy message to the user

After az webapp deploy / azd deploy returns successfully, the skill is done. Do not run any further verification commands.

Hard rules

⛔ Never run az webapp log tail as a "confirm startup" step — logs are often quiet for 1–2 min during build/warm-up; silence is not a failure signal.
⛔ Never run curl, Invoke-WebRequest, wget, or any HTTP request against the deployed URL — first request often 502s or times out on a healthy deploy.
⛔ Never present an early 5xx or quiet log stream as a deploy failure — the deploy succeeded; the platform just isn't warm yet.
✅ Always give the user the URL, the wait expectation, and the log command, then stop.

Message template — standard (Flask / Django / FastAPI)

Use this when Step 2 detected a known framework (flask, django, or fastapi). Print exactly this (substituting the real values) as the final output of the skill, then end the turn:

✅ Deployment complete.

🌐 App URL: https://<app>.azurewebsites.net
   It can take 2–3 minutes for the site to be reachable while App Service finishes
   warming up the container. Open it in your browser after a short wait.

📜 If you want to watch live logs:
   az webapp log config -n <app> -g <rg> --application-logging filesystem --level information
   az webapp log tail -n <app> -g <rg>
   (The first command is a one-time prereq on a fresh app — without it the stream stays empty.)

Message template — unknown framework

Use this when Step 2 detected wsgi-generic, asgi-generic, or unknown (i.e. not Flask, Django, or FastAPI). The code is already deployed and SCM_DO_BUILD_DURING_DEPLOYMENT=true is set, but Oryx will not know how to start the app until the user sets a startup command. Print this instead:

✅ Code deployed — but framework not detected.

🌐 App URL: https://<app>.azurewebsites.net
   It can take 2–3 minutes for App Service to finish building and start the
   container. The site will likely return an error page until you set a
   startup command (next step).

⚠️  We could not detect Flask, Django, or FastAPI in your project, so no
   startup command was set automatically. Set one with:

   az webapp config set -n <app> -g <rg> \
     --startup-file "<your-startup-command>"

   Examples:
     • Generic WSGI (gunicorn):
         gunicorn --bind=0.0.0.0 --timeout 600 <module>:<callable>
     • Generic ASGI (uvicorn):
         python -m uvicorn <module>:<callable> --host 0.0.0.0 --port 8000

   See references/startup-commands.md for more guidance.

📜 If you want to watch live logs:
   az webapp log config -n <app> -g <rg> --application-logging filesystem --level information
   az webapp log tail -n <app> -g <rg>
   (The first command is a one-time prereq on a fresh app — without it the stream stays empty.)

Replace <module>:<callable> with the user's actual entry point (e.g. app:app, main:application, myapp.wsgi:application). If you can identify a likely entry point from the source code, suggest a concrete command instead of leaving placeholders.

Logging tips (mention only if the user asks for them)

⚠️ Prereq for az webapp log tail on a fresh app: filesystem logging must be enabled or the live stream stays empty. Run once:
az webapp log config -n <app> -g <rg> \
  --application-logging filesystem --web-server-logging filesystem --level information
az webapp log config -n <app> -g <rg> `
  --application-logging filesystem --web-server-logging filesystem --level information
Deployment-build logs do not require this — read them with az webapp log deployment list/show.

Log	Command
Deployment history	`az webapp log deployment list -n <app> -g <rg>`
Deployment details	`az webapp log deployment show -n <app> -g <rg> --deployment-id <id>`
Full log download	`az webapp log download -n <app> -g <rg>`

Picking which template to use

Detected framework (Step 2)	Template
`flask`, `django`, `fastapi`	standard
`wsgi-generic`, `asgi-generic`, `unknown`	unknown framework

What "success" means here

Either of these is enough to print the success message — do not gate on log output or an HTTP probe:

az webapp deploy returned without an error, or
azd deploy printed SUCCESS: Your application was deployed to Azure

4.4 KiB Raw Permalink Blame History Unescape Escape