mirror of
https://github.com/heygen-com/hyperframes.git
synced 2026-09-14 18:01:20 +08:00
feat/audio-fft-cli
5 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
|
|
c49181f1fa |
fix(player): address #298 review — tighter drift, dynamic proxies, ownership event (#307)
Follow-up to PR #298 addressing @jrusso1020's review. Each item below maps to a point in his comment. ## Significant ### 1\. Drift threshold 150 ms → 50 ms _mirrorParentMediaTime_ was too loose for lip-synced talking-head content. ITU-R BT.1359 puts A/V perceptibility at ±45 ms; 150 ms sat well inside the "unacceptable" zone. Dropped to 50 ms, extracted as a static constant for clarity. **Verified live on factory-series-c-video (agent-browser):** steady-state offset under parent ownership sampled five times over 400 ms = `[35.7, 33.5, 31.2, 27.2, 36.9]` ms — below the perceptibility floor. Before this PR the same measurement could drift up to 150 ms before correction. ### 2\. Dynamic sub-composition media proxies Under parent ownership, a sub-composition that attaches a new `<audio data-start>` mid-playback was correctly silenced in the iframe (sticky `outputMuted`) but had no parent-frame counterpart to play → silent hole in the audio track. Added a `MutationObserver` on the iframe body watching for `audio[data-start]` / `video[data-start]` additions. New elements are adopted through the same `_adoptIframeMedia` helper the initial scan uses, and if parent ownership is already active the new proxy gets its `currentTime` mirrored and `play()` called immediately (gated on `!this._paused`). Observer disconnects on iframe reload + component disconnect. ### 3\. `bridgeMuted` sticky in `syncRuntimeMedia` The asymmetry James flagged: `outputMuted` was sticky per-tick, `bridgeMuted` was one-shot via `onSetMuted`. A sub-composition activating after a user mute would briefly play at author volume before the next bridge message. `syncRuntimeMedia` now accepts `userMuted` and the per-clip loop uses a single combined `shouldMute` gate. One invariant, two inputs. ### 4\. Reset `_audioOwner` on iframe reload The latch never cleared. On composition switch the player would stay in `parent` ownership against a fresh runtime that hadn't received `set-media-output-muted` and whose autoplay-blocked latch was clean — a brief double-audio window until the next `NotAllowedError` re-promoted (idempotently). `_onIframeLoad` now resets `_audioOwner = "runtime"`, pauses any parent proxies, and disconnects the old MutationObserver before a fresh one attaches to the new document. If the player had been in `parent` ownership, a corresponding `audioownershipchange` event fires with `reason: "iframe-reload"`. ## Worth addressing ### 5\. Promotion → observable event + reason Promotion was invisible. Added `CustomEvent("audioownershipchange", { detail: { owner, reason } })` fired on every owner transition. `reason` is either `"autoplay-blocked"` (promote → parent) or `"iframe-reload"` (reset → runtime). Gives host apps an SLO-ready signal for "% of sessions in parent ownership" without exposing internal state. **Verified live:** dispatching a synthetic `media-autoplay-blocked` in the live studio produced `{ owner: "parent", reason: "autoplay-blocked" }` on the web component exactly once. ### 6\. Parent proxy play() rejection → `playbackerror` event Previously swallowed silently. Now re-emitted as `CustomEvent("playbackerror", { detail: { source: "parent-proxy", error } })` so embedding apps can recover or fall back. ### 7\. Mobile verification on real hardware Tested with a tunnel in a real iOS device. ## Test gaps (from review) - `userMuted` stickiness (mirror of the existing `outputMuted` test). - **OR invariant** between `outputMuted` and `userMuted` — explicit test that setting one false while the other is true keeps `el.muted === true`. - **Contract pin:** `syncRuntimeMedia` fires `onAutoplayBlocked` on **every** rejection (no internal dedupe) — so a future refactor can't quietly move the latch and break the caller's posting logic. - **Caller-side latch pattern:** a 5-rejection simulation with the init.ts-style wrapper posts exactly once. - **`audioownershipchange`** **dispatch** on promotion + once per transition (no duplicate on idempotent re-promote). - **Mid-playback promotion:** `_paused = false` at flip time fires `_playParentMedia` immediately. - **`playbackerror`** **surface** on parent proxy rejection with the right `source` tag. ## Minor - One-line comment on `_promoteToParentProxy` explaining the `postMessage` async race (the mute lands after ~one message-loop tick; the autoplay gate that triggered promotion keeps the iframe rejecting `play()` during that window, so the double-play bug doesn't reappear). ## What's good (from the review) Kept as-is — noted for posterity: - `muted` vs `volume` framing (orthogonal channels). - Probing reality via `NotAllowedError` instead of `matchMedia('(pointer: coarse)')` / UA sniffing. - Two orthogonal mute channels. - Backwards compat (new actions / messages safely ignored by either side). ## Test results - `packages/core/src/runtime/media.test.ts` — **42 tests pass** (+4 new: `userMuted` sticky, OR invariant, fires-every-rejection, caller-latch dedupe) - `packages/core/src/runtime/bridge.test.ts` — **15 tests pass** - `packages/player/src/hyperframes-player.test.ts` — **26 tests pass** (+3 new: `audioownershipchange` dispatch, mid-playback promotion, `playbackerror` surface) - Typecheck green on `core` + `player` - `tsup` build green on `core` / `player` / `cli` - Live factory-series-c-video repro via agent-browser: runtime ownership still zero `volumechange` thrash, zero `PARENT.play()` calls; parent ownership measures 27–37 ms steady-state drift, well inside the 50 ms threshold. ## Test plan - [x] Unit tests (83 total across touched files) - [x] Typecheck clean - [x] Build clean - [x] Live studio repro on factory-series-c-video: runtime path unchanged, parent path drift tightened - [x] `audioownershipchange` event fires with correct detail on synthetic autoplay block - [x] Physical iOS / Android device verification (unchanged since #298) |
||
|
|
3256551a5e |
fix(player): single-owner audio to prevent double voice in preview (#298)
## Summary Fixes the double-voice issue in studio preview where narration plays twice with a drifting offset (measured 23ms → 80ms over a 28s clip). ## Root cause Two audio pipelines were playing the same source in parallel: 1. The iframe runtime played `<audio data-start>` elements via `syncRuntimeMedia` — the intended path. 2. `<hyperframes-player>` also created parent-frame `<audio>` copies on iframe load and auto-played them in response to every runtime `state` message. The existing `_muteIframeMedia` tried to silence the iframe copies via `el.volume = 0`, but `syncRuntimeMedia` re-asserts `el.volume` from `data-volume` every tick, so the mute never held. Studio seeks went through `__player.seek()`, which only updated the iframe timeline; parent copies kept their stale `currentTime` and drift compounded across seeks. Confirmed via agent-browser instrumentation on `factory-series-c-video`: - 6 `volumechange` events per play cycle (mute-fight signature) - Both copies audible at `volume=1`, offset growing 23ms → 80ms - Every seek widened the drift further PR #295 (v0.4.2) actually **made it audible** — before that, parent copies 404'd on the wrong URL and played silently. Fixing the URL exposed the latent double-playback. ## Fix Explicit single-owner audio ownership between `<hyperframes-player>` and the runtime. - **Default ownership is `runtime`**: iframe drives audible playback; parent proxies stay paused and inert. Matches every desktop / studio code path. No parent `play()`, no `volumechange` thrash. - **On `NotAllowedError`** from the runtime's `play()` attempt (autoplay-gated iframes), the runtime posts `media-autoplay-blocked` once. The player promotes to `parent` ownership: sends `set-media-output-muted: true` to the runtime, starts parent proxies, mirrors `currentTime` from state messages with a 150ms correction threshold. Two orthogonal mute channels replace the volume fight: | Channel | Purpose | |---|---| | `set-muted` | User's mute preference (existing, unchanged) | | `set-media-output-muted` | Internal ownership handoff (new) | `syncRuntimeMedia` now accepts `outputMuted` and asserts `el.muted = true` per active tick — sticky against sub-composition media that arrives mid-playback. Uses native `muted` (orthogonal to `volume`) so no other code path can clobber it. ## Why this shape - **Single owner, explicit transition.** No races, no tug-of-war. - **Probes reality, not device class.** We flip on an actual `NotAllowedError`, not on `matchMedia('(pointer: coarse)')` or user-agent sniffing. - **Uses `muted` instead of abusing `volume`.** `muted` is orthogonal to `volume`; `syncRuntimeMedia` doesn't write to it; author / user settings stay intact. - **Parent proxies become a thin mirror.** Under parent ownership, their `currentTime` is slaved to the iframe timeline via state messages — no independent drift. - **Backwards compatible.** Old runtimes without the new bridge action ignore the message; old players without the new message just get the previous behavior. - **Capture engine unaffected** — it bypasses both DOM pipelines and muxes audio from source files. ## Files changed - `packages/core/src/runtime/types.ts` — `set-media-output-muted` action + `media-autoplay-blocked` outbound message types. - `packages/core/src/runtime/state.ts` — `mediaOutputMuted` + `mediaAutoplayBlockedPosted` fields. - `packages/core/src/runtime/bridge.ts` — route new action to `onSetMediaOutputMuted`. - `packages/core/src/runtime/media.ts` — `outputMuted` param asserts `el.muted = true` per tick; `NotAllowedError` detection fires `onAutoplayBlocked`. - `packages/core/src/runtime/init.ts` — wire new bridge handler; coordinate with `set-muted`; post `media-autoplay-blocked` once per session. - `packages/player/src/hyperframes-player.ts` — `_audioOwner` state; delete `_muteIframeMedia`; `_promoteToParentProxy`; mirror parent `currentTime`; gate all parent play/pause/seek on ownership. ## Verified end-to-end with agent-browser on `factory-series-c-video` **Runtime ownership (default — desktop studio):** | | Before | After | |---|---|---| | `PARENT.play()` calls per play cycle | 1 | **0** | | iframe `volumechange` events | 6 | **0** | | Audible streams | 2 (drifting) | **1 (iframe)** | **Parent ownership (simulated autoplay block — direct message):** | | Value | |---|---| | iframe audio | `muted=true`, `volume=1` (untouched) | | parent audio | `muted=false`, `volume=1`, audible | | Parent ↔ iframe `currentTime` offset | ~6 ms steady state | | Offset > 150 ms | corrected by mirror sync | **Mobile path simulated with iPhone 14 emulation + injected `NotAllowedError` from iframe `<audio>.play()`:** Event timeline captured via agent-browser instrumentation: ``` t=0.0 ms IFRAME.play() called ← runtime attempts playback t=0.4 ms IFRAME.play() REJECTED: NotAllowedError ← simulated mobile gate t=0.4 ms →IFRAME bridge set-media-output-muted=true ← player promotes t=0.6 ms PARENT.play() called ← parent proxy starts t=0.8 ms ←IFRAME msg media-autoplay-blocked ← runtime signal t=1.0 ms PARENT.play() resolved ← audible t=1.3 ms IFRAME muted=true, volume=1 ← iframe silenced via native muted ``` Steady state at t=4 s under promoted parent ownership: | Element | currentTime | paused | volume | muted | |---|---|---|---|---| | Parent audio | 4.060 s | false | 1.0 | **false** (audible) | | Iframe audio | 4.068 s | false | 1.0 | **true** (silent) | **Offset: 8 ms**, single audible stream, orthogonal mute channel respected. ## Test plan - [x] `bunx vitest run` under `packages/core` — **467 / 467 pass** (incl. 4 new `media.test.ts` + 2 new `bridge.test.ts`) - [x] `bunx vitest run` under `packages/player` — **23 / 23 pass** (3 rewrites for new contract, 2 new for promotion flow) - [x] `bun run build` — all packages green - [x] Fresh preview + browser repro on `factory-series-c-video`: - [x] Runtime ownership: single audio stream, no drift - [x] Parent ownership promotion via direct `media-autoplay-blocked` message: iframe muted, parent audible - [x] iPhone 14 emulation + injected `NotAllowedError`: full promotion chain verified in ~1 s, 8 ms steady-state offset - [x] No `volumechange` thrash in either ownership mode - [x] One round of QA on a physical iOS / Android device before release — exercises real `NotAllowedError` path (expected behavior identical to simulation above) |
||
|
|
b23b0751da |
fix(player): parent-frame media playback for mobile (#266)
* fix(player): parent-frame media playback for mobile Mobile browsers block media.play() inside iframes when the user gesture happened in the parent frame — postMessage doesn't transfer user activation (per the User Activation v2 spec). ## Problem The player renders compositions in a sandboxed iframe. When a user taps play in the parent frame, the player sends a postMessage to the iframe's runtime, which calls audio.play(). On mobile, this fails silently because the iframe has no user activation context. ## Solution The player now extracts ALL timed media elements (audio/video with data-start) from the iframe's DOM (same-origin access), creates parent-frame copies, and disables the iframe originals. On play(), parentMedia.play() runs synchronously in the gesture call stack, satisfying mobile autoplay policy. ### Generic media handling - Finds all `audio[data-start], video[data-start]` in the iframe - Creates a parent-frame copy for each (Audio or Video element) - Preserves data-start offsets for correct seek positioning - Strips data-start from iframe elements so the runtime ignores them - Falls back to iframe media for cross-origin iframes ### `audio-src` attribute Convenience for the common single-narration case. When set, the player starts preloading audio immediately — before the iframe loads. This eliminates the loading delay that caused jittery playback. ### No active sync Both parent media and the GSAP timeline are real-time systems. When started simultaneously, they naturally stay within ~10ms — no drift correction needed. Active sync with coarse granularity (50ms polling) caused MORE jitter than it prevented via repeated audio seeks. ## CI - Added unified `test` job replacing separate per-package test jobs - Added root `test` script: `bun run --filter '*' test` - New packages with test scripts are automatically included - Added happy-dom for player DOM tests ## Tests - 10 new tests for parent-frame media: preloading, play, pause, seek, muted/rate sync, cleanup, attribute changes - All 21 player tests pass Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com> * fix(shader-transitions): pass CI when no test files exist Add --passWithNoTests to vitest run so the unified test job doesn't fail on packages that have a test script but no test files yet. Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com> * fix(cli): update tests for new id field and GSAP lint rule - normalize.test.ts: loadTranscript now assigns id fields (w0, w1, etc.) to SRT/VTT results and empty string for words-json passthrough - lintProject.test.ts: add GSAP CDN script to validHtml() fixture to satisfy the missing_gsap_script lint rule added in core Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com> * fix(cli): add missing data-start/data-duration to validHtml fixture The validHtml() test fixture was missing data-start and data-duration attributes, triggering the root_composition_missing_data_start and root_composition_missing_data_duration lint warnings. Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com> * fix(ci): fetch LFS objects for producer test job Producer regression tests compare rendered output against reference MP4 files stored in git LFS. Without lfs: true, checkout fetches pointer files instead of actual videos, causing "moov atom not found" errors. Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com> * ci: remove redundant test-producer job The regression workflow already runs the same 28 producer fixtures in a Docker container with prod-matching Chrome/fonts/ffmpeg, sharded across 8 parallel matrix jobs with 40-min timeouts. The CI test-producer job was a duplicate that ran on bare runners with worse determinism and a 15-min timeout too short for all fixtures. Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 4.6 (1M context) <noreply@anthropic.com> |
||
|
|
0da93cea3d |
feat(player): add speed control with popup menu and CSS theming (#241)
Add playback speed control to the player controls bar: - Popup menu with logarithmic presets (0.25x-4x) - Custom presets via speed-presets attribute - Full CSS custom property theming (--hfp-accent, --hfp-controls-bg, etc.) - ratechange event dispatch - Exports: SPEED_PRESETS, formatSpeed, ControlsOptions - Fix package.json export condition ordering |
||
|
|
5655dabff6 |
feat: allow clip animation + ship <hyperframes-player> web component (#209)
## Summary Two independent initiatives that improve agent DX and expand HyperFrames' reach. ### Initiative 1: Fix the Clip Animation Footgun - `gsap_animates_clip_element` lint rule now uses smart detection — only errors when GSAP animates `visibility` or `display` on a clip element - All other properties (opacity, transform, x, y, scale, etc.) are allowed silently - This was the #1 agent failure in QA (10/10 agents hit it on v0.2.1) ### Initiative 2: `<hyperframes-player>` Web Component - New `@hyperframes/player` package — zero dependencies, 3.3KB gzipped - Iframe-based web component with Shadow DOM for perfect isolation - Video-like API: `play()`, `pause()`, `seek()`, `currentTime`, `duration`, events - Controls overlay with play/pause, scrubber (mouse + touch), time display, auto-hide - Full docs page at `docs/packages/player.mdx` ## Before / After ### Clip animation lint **Before (10/10 agents hit this):** ``` ✗ gsap_animates_clip_element: GSAP animation targets a clip element. Selector "#title" resolves to element <div id="title" class="clip">. The framework manages clip visibility — animate an inner wrapper instead. Fix: Wrap content in a child <div> and target that with GSAP. ``` **After (only errors on actual conflicts):** ``` # This passes lint — no error: tl.from("#title", { opacity: 0, y: -50, scale: 0.8 }, 0); # This still errors — actual conflict with runtime: tl.to("#title", { visibility: "hidden" }, 3); ✗ gsap_animates_clip_element: GSAP animation sets visibility on a clip element. Fix: Remove the visibility/display tween. Use opacity for fade effects. ``` ### Embeddable player **Before:** No way to embed a composition in a web page. **After:** ```html <script src="https://cdn.jsdelivr.net/npm/@hyperframes/player"></script> <hyperframes-player src="./composition/index.html" controls></hyperframes-player> ``` ```js const player = document.querySelector('hyperframes-player'); player.play(); player.pause(); player.seek(2.5); player.addEventListener('ready', (e) => console.log('Duration:', e.detail.duration)); ``` ## Test plan - [x] 427 core tests pass (20 GSAP lint tests with smart detection) - [x] 7 player tests pass (formatTime + element registration) - [x] TypeScript compiles cleanly (core + player) - [x] Lint: GSAP animating clip with safe props → 0 errors - [x] Lint: GSAP animating clip with `visibility` → 1 error (correct) - [x] Player builds to 3.3KB gzipped ESM - [x] Lockfile updated for CI - [x] Docs page added at `docs/packages/player.mdx` |