Add a new agent-driven skill that syncs delta specs from a change to main specs
without requiring archiving. This enables:
- Updating main specs during active development
- Intelligent merging (partial updates, adding scenarios)
- Idempotent operation (safe to run multiple times)
Implementation:
- Extract shared specs-apply logic from archive.ts to specs-apply.ts
- Add getSyncSpecsSkillTemplate and getOpsxSyncCommandTemplate
- Register /opsx:sync in artifact-experimental-setup
- Add specs-sync-skill main spec
* feat: make apply instructions schema-aware
The `generateApplyInstructions` function was hardcoded to check for
`spec-driven` artifacts. This change makes it read artifact definitions
from the schema's new `apply` block, enabling support for different
workflows like TDD.
Changes:
- Add `ApplyPhaseSchema` Zod schema with `requires`, `tracks`, and
`instruction` fields to types.ts
- Update `SchemaYamlSchema` to include optional `apply` field
- Add `apply` block to spec-driven and tdd schemas
- Refactor `generateApplyInstructions` to:
- Load schema via `resolveSchema()`
- Read `apply.requires` for required artifacts
- Check artifact existence dynamically (supports glob patterns)
- Use `apply.tracks` for progress tracking (or skip if null)
- Use `apply.instruction` for custom guidance
- Build `contextFiles` from all existing artifacts in schema
- Handle fallback when schema has no `apply` block (require all artifacts)
- Add 8 new tests for schema-aware apply behavior
* fix: improve apply instructions robustness and consistency
- Fix artifactOutputExists to properly handle glob patterns cross-platform
by using path.sep and verifying actual file matches
- Remove redundant if/else in contextFiles loop
- Distinguish between missing tracks file vs empty tracks file
- Use consistent { error: } key in ApplyPhaseSchema validation
- Rename fallback test to accurately describe what it tests
* test: add fallback behavior tests for schemas without apply block
Add two tests that verify the fallback logic when a schema lacks an
apply block:
- Blocks when not all artifacts exist (requires ALL artifacts)
- Ready state with default instruction when all artifacts exist
Uses XDG_DATA_HOME to create temporary user schemas for testing.
- Add `openspec schemas` CLI command with `--json` option for agents
- Add `listSchemasWithInfo()` helper to get schema metadata (name, description, artifacts)
- Update `openspec-new-change` skill to prompt for schema selection
- Update `openspec-continue-change` skill to read schema dynamically from status
- Update `openspec-apply-change` skill to use schema-specific context files
- Update all slash commands (/opsx:new, /opsx:continue, /opsx:apply) to be schema-agnostic
- Add documentation for when to use each schema (spec-driven vs tdd)
Agents can now create changes with different workflow schemas and the skills
dynamically adapt based on the selected schema's artifact sequence.
* feat: add Agent Skills for experimental artifact workflow
Implements Task #3 from the experimental release plan:
- Create skill templates for openspec-new-change and openspec-continue-change
- Add artifact-experimental-setup CLI command
- Generate Agent Skills in .claude/skills/ directory
- Support cross-editor compatibility (Claude Code, Cursor, Windsurf)
Skills follow the Agent Skills specification and provide:
- Natural language invocation by AI assistants
- Step-by-step artifact creation workflow
- Dependency-driven change management
* fix: update GitHub issues URL to correct repository
Replace placeholder `https://github.com/your-org/openspec/issues`
with correct URL `https://github.com/Fission-AI/OpenSpec/issues` in:
- docs/experimental-release-plan.md
- src/commands/artifact-workflow.ts
Verified against package.json repository.url field.
* feat: add openspec-apply-change skill for task implementation
Add the apply skill to guide agents through implementing tasks from an
OpenSpec change:
- Add `openspec instructions apply` CLI command that parses tasks.md and
returns context files, progress tracking, and dynamic instructions
- Add `getApplyChangeSkillTemplate()` to skill-templates.ts with full
workflow guidance for implementing tasks
- Update artifact-experimental-setup to generate all three skills:
openspec-new-change, openspec-continue-change, openspec-apply-change
The apply skill supports the fluid "actions on a change" model:
- Can be invoked anytime (if tasks.md exists)
- Handles blocked/ready/all_done states
- Guides agents to pause on issues and suggest artifact updates
- Tracks progress via task checkboxes
* docs: mark apply skill implementation steps as complete
* feat: add Capabilities section to proposal template
Enrich the proposal template to explicitly capture capability discovery:
- Add "Capabilities" section with "New Capabilities" and "Modified
Capabilities" subsections to proposal template
- Update proposal instruction in schema.yaml to guide agents on
researching existing specs and listing capabilities
- Update skill instructions with detailed guidance for the Capabilities
section
This creates a clear contract between proposal and specs phases - each
capability listed in the proposal will need a corresponding spec file.
* feat: remove redundant `openspec next` command
The `next` command was redundant with `status` - both show which artifacts
are ready to create. The status command provides more context (done/ready/blocked)
and is the single source of truth for artifact state.
Changes:
- Remove nextCommand function and CLI registration from artifact-workflow.ts
- Update skill templates to use status instead of next
- Update docs and specs to reflect removal
- Add REMOVED Requirements section to cli-artifact-workflow spec
- Remove 7 tests for the next command
Migration: Use `openspec status --change <id> --json` and filter artifacts
with `status: "ready"` to find artifacts that can be created next.
* docs: clarify kebab-case naming in proposal template
Update HTML comments in the Capabilities section to explicitly instruct
using kebab-case identifiers with examples (user-auth, data-export,
api-rate-limiting).
* feat: add change proposals for per-change schema metadata
Add two related change proposals for enabling schema selection in the
experimental artifact workflow:
1. add-per-change-schema-metadata: Store schema choice in .openspec.yaml
per change, enabling auto-detection in workflow commands. Includes
Zod schema design and delta specs for cli-artifact-workflow.
2. add-agent-schema-selection: Follow-up to update agent skills to
support dynamic schema selection (depends on metadata change).
Also includes:
- Example .openspec.yaml in add-frontmatter-to-openspec-artifact-files
- Clarify "Modified Capabilities" guidance in proposal template
* remove test change
* feat: fix design.md as optional, update docs, add schema-aware apply proposal
Changes:
- Fix generateApplyInstructions to treat design.md as optional (not required)
- Update experimental-release-plan.md CLI output to match implementation
- Add openspec-apply-change skill to docs (was missing)
- Fix test flow numbering after adding apply skill verification step
- Add change proposal for making apply instructions schema-aware
The schema-aware proposal introduces an `implementation` block in schema.yaml
to define when a change becomes implementable and how to track progress.
Archives two changes that were missing complete requirement content in their
spec deltas, which would have caused data loss during archival:
1. add-antigravity-support: Adds Antigravity IDE support to cli-init and
cli-update with proper workflow file generation in `.agent/workflows/`
2. fix-cline-workflows-implementation: Corrects Cline paths from `.clinerules/`
to `.clinerules/workflows/` to match Cline's official workflow conventions
Both deltas were fixed to include all 15 slash command scenarios (14 existing +
1 new Antigravity) to prevent loss of existing requirements when archived.
* proposal: add artifact workflow CLI commands (Slice 4)
Add CLI commands for artifact workflow operations:
- `openspec status --change <id>` - Show artifact completion state
- `openspec next --change <id>` - Show ready artifacts
- `openspec instructions <artifact> --change <id>` - Get enriched template
- `openspec templates --change <id>` - Show template paths
- `openspec new change <name>` - Create new change
Commands are top-level for fluid UX and implemented in isolation
for easy removal (experimental feature).
* fix: remove --change from templates command
Templates are schema-level, not change-level. The command now uses
--schema instead of --change for consistency with how templates
are actually resolved.
* rename: cli-workflow -> cli-artifact-workflow
More specific capability name that clarifies which workflow the CLI
commands are for.
* feat: implement artifact workflow CLI commands (Slice 4)
Add experimental CLI commands for artifact-based workflow management:
- `openspec status --change <id>` - display artifact completion status
- `openspec next --change <id>` - show artifacts ready to create
- `openspec instructions <artifact> --change <id>` - output enriched template
- `openspec templates [--schema <name>]` - show resolved template paths
- `openspec new change <name>` - create new change directory
Features:
- JSON output support (--json flag) for all commands
- Color-coded status indicators (green/yellow/red)
- Progress spinners during loading
- --no-color and NO_COLOR env support
- --schema option for custom schema selection
- Comprehensive error handling with helpful messages
All commands are isolated in src/commands/artifact-workflow.ts for easy
removal if the feature doesn't work out. Help text marks them as experimental.
* fix: update specs glob to match nested directory structure
The schema used specs/*.md but specs are stored as specs/<capability>/spec.md.
Updated to specs/**/*.md so openspec status/next correctly detect spec completion.
* test: update test to match new specs glob pattern
* chore: archive add-artifact-workflow-cli change
- Move change to archive/2025-12-28-add-artifact-workflow-cli
- Create cli-artifact-workflow spec
* feat: unify change state model for scaffolded changes
- Update artifact workflow commands to work with scaffolded changes
- Add draft changes section to dashboard view
- Fix completed changes to require tasks.total > 0
- Archive unify-change-state-model change
* fix: validate change name format to prevent path traversal
Add validation in validateChangeExists() to ensure --change parameter
is a valid kebab-case ID before constructing file paths. This prevents
path traversal attacks like --change "../foo" or --change "/etc/passwd".
- Reuses existing validateChangeName() from change-utils.ts
- Adds 3 tests for path traversal, absolute paths, and slashes
* feat: add instruction loader for template loading and change context
Add the instruction-loader module that provides:
- loadTemplate: Load templates from schema directories
- loadChangeContext: Combine artifact graph with completion state
- generateInstructions: Enrich templates with change-specific context
- formatChangeStatus: Format change status as readable output
This is Slice 3 of the artifact-graph system, building on the graph
operations (Slice 1) and change creation utilities (Slice 2).
* chore: archive add-instruction-loader change
- Move change to archive as 2025-12-28-add-instruction-loader
- Create instruction-loader spec with 4 requirements
* docs: add purpose description to instruction-loader spec
* feat: restructure schemas as directories with templates
Move built-in schemas from embedded TypeScript objects to a file-based
directory structure. This enables co-located templates alongside schemas.
Changes:
- Remove builtin-schemas.ts (replaced by file-based schemas)
- Add schemas/ directory at package root with spec-driven and tdd schemas
- Update resolveSchema() to load from directory structure
- Resolution checks user dir → package dir
* chore: archive restructure-schema-directories change
* docs: update artifact_poc.md for directory-based schema structure
Update documentation to reflect the new schema structure where schemas
are directories containing schema.yaml and co-located templates/ rather
than single .yaml files with separate template directories.
* proposal: add instruction loader and schema restructure (Slice 3)
Adds two change proposals for implementing Slice 3 of the artifact POC:
1. restructure-schema-directories
- Move schemas from embedded TS objects to self-contained directories
- Each schema becomes a directory with schema.yaml + templates/
- Enables co-located templates for user extensibility
- 2-level resolution: user override → package built-in
2. add-instruction-loader (depends on #1)
- Load templates from schema directories
- Enrich templates with change context (dependencies, next steps)
- Format change status for CLI output
- New instruction-loader capability
These proposals complete Slice 3 from docs/artifact_poc.md.
* fix: include full requirement block in MODIFIED spec
Update the Schema Loading requirement to include all original scenarios
(modified as needed) per the MODIFIED requirement guidelines. The archiver
replaces the entire requirement with the provided content.
* proposal: add artifact graph core query system
Add OpenSpec change proposal for Slice 1 of the artifact POC - the core
"What's Ready?" query system. This implements:
- ArtifactGraph class for DAG-based dependency modeling
- Filesystem-based state detection (file existence = completion)
- Topological sort for build order calculation
- Ready/blocked artifact queries
This is a parallel module that will coexist with the current system.
* docs: specify Zod for schema validation in artifact graph proposal
- Add decision section for Zod schema validation in design.md
- Update data structures to show Zod schemas with z.infer<> types
- Update tasks to specify Zod usage for type definitions and parsing
* docs: add 2-level schema resolution and built-in schemas
- Add decision for global → built-in schema resolution pattern
- Add resolver.ts for schema lookup logic
- Add built-in schemas directory (spec-driven.yaml, tdd.yaml)
- Add schema resolution tests
- Follows ESLint/Prettier/Git patterns (defaults baked in package)
* experiment: add vertical slice version of artifact graph change
Creates add-artifact-graph-core-v2 with requirements organized as
vertical slices - each requirement file contains its spec, design
decisions, and tasks bundled together for comparison.
* feat(core): add getGlobalDataDir for XDG-compliant data directory
Add getGlobalDataDir() function following XDG Base Directory Specification
for storing user data like schema overrides:
- XDG_DATA_HOME takes precedence on all platforms
- Unix/macOS fallback: ~/.local/share/openspec/
- Windows fallback: %LOCALAPPDATA%/openspec/
* feat(artifact-graph): add core dependency graph module
Implement Slice 1 ("What's Ready?") of the artifact graph system:
- types.ts: Zod schemas for artifact definitions with derived TypeScript types
- schema.ts: YAML parsing with validation for duplicates, invalid refs, cycles
- graph.ts: ArtifactGraph class with Kahn's algorithm for topological sort
- state.ts: Filesystem-based completion detection with glob pattern support
- resolver.ts: Two-level schema resolution (global override → built-in)
- builtin-schemas.ts: spec-driven and tdd workflow definitions
Key design decisions:
- Filesystem as database (stateless, git-friendly)
- Cycle errors show full path (e.g., "A → B → C → A")
- Deterministic ordering via sorted queues
* test(artifact-graph): add comprehensive test suite
52 tests covering all artifact-graph functionality:
- schema.test.ts: Parsing, validation errors, cycle detection
- graph.test.ts: Build order, ready artifacts, blocked queries
- state.test.ts: File existence, glob patterns, missing directories
- resolver.test.ts: Schema resolution with global overrides
* docs(openspec): archive add-artifact-graph-core change
Archive completed change proposal and create artifact-graph spec with
6 requirements covering schema loading, build order, state detection,
ready queries, completion checks, and blocked queries.
* chore: remove experimental artifact-graph-core-v2 folder
Clean up experimental vertical slice proposal that is no longer needed.
* feat(artifact-graph): validate global schema overrides
Global schema overrides are now validated through the same pipeline as
built-in schemas, catching invalid schemas, cyclic dependencies, and
invalid requires references at load time. Added SchemaLoadError for
better error context with file paths.
* test(artifact-graph): add workflow integration tests
Add end-to-end integration tests that exercise the full artifact-graph
pipeline: resolveSchema → ArtifactGraph → detectCompleted → queries.
Tests cover:
- Complete spec-driven and tdd workflow progressions
- Out-of-order file creation handling
- Glob pattern matching with multiple files
- Build order consistency
- Edge cases (empty/missing directories, non-matching files)
* refactor(artifact-graph): adopt zod v4 error message format
Update custom error messages from string format to zod v4 object format
using `{ error: 'message' }` convention.
* fix(test): prevent hanging vitest threads after test runs
- Add teardownTimeout (3s) to vitest config for forced cleanup
- Add global teardown function to vitest.setup.ts
- Call child.unref() to prevent child processes from blocking event loop
- Explicitly destroy stdio streams on process close/error
* feat(cli): add openspec config command for global configuration management
Implements the `openspec config` command with subcommands:
- `path`: Show config file location
- `list [--json]`: Show all current settings
- `get <key>`: Get a specific value (raw output for scripting)
- `set <key> <value> [--string]`: Set a value with auto type coercion
- `unset <key>`: Remove a key (revert to default)
- `reset --all [-y]`: Reset configuration to defaults
- `edit`: Open config in $EDITOR/$VISUAL
Key features:
- Dot notation for nested key access (e.g., featureFlags.someFlag)
- Auto type coercion (true/false → boolean, numbers → number)
- --string flag to force string storage
- Zod schema validation with unknown field passthrough
- Reserved --scope flag for future project-local config
- Windows-compatible editor spawning with proper path quoting
- Shell completion registry integration
* test(config): add additional unit tests for validation and coercion
- Add tests for unknown fields with various types
- Add test to verify error message path for featureFlags
- Add test for number values rejection in featureFlags
- Add config set simulation tests to verify full coerce → set → validate flow
* fix(config): avoid shell parsing in config edit to handle paths with spaces
Use spawn with shell: false and pass configPath as an argument instead
of building a shell command string. This correctly handles spaces in
both the EDITOR path and config file path on all platforms.
* chore(openspec): archive add-config-command and create cli-config spec
Move completed change to archive and apply spec deltas to create
the cli-config specification documenting the config command interface.
* Validate config keys on set
* feat(core): implement global config directory with XDG support
Add new global-config module following XDG Base Directory Specification with platform-specific fallbacks (Unix: ~/.config/openspec, Windows: %APPDATA%/openspec). Includes config loading with defaults, config saving with directory creation, and full test coverage. Archive add-global-config-dir change.
* docs(spec): add Purpose section to global-config spec
Replace placeholder text with a concise description of what the spec governs, its scope, and high-level objectives.
Create two OpenSpec change proposals:
1. add-global-config-dir: Foundation for user-level configuration following XDG Base Directory Specification with cross-platform support
2. add-config-command: User-facing CLI command for viewing and managing global settings
Both proposals are minimal and focused on providing a clean, extensible base for OpenSpec settings and future feature flags.
* shell completions for zsh
* after code review changes
* expose only postinstall.js script
* Replace _openspec "$@" with compdef in zsh-generator.ts to prevent execution during load
* Update test/commands/completion.test.ts
Co-authored-by: coderabbitai[bot] <136622811+coderabbitai[bot]@users.noreply.github.com>
* - Fix dispatcher to use $words instead of $line for subcommand routing
- Add __complete endpoint with tab-separated output for safe parsing
- Replace brittle awk parsing with __complete in completion helpers
- Add uninstall confirmation prompt with --yes flag to skip
- Prefer $ZSH env var for Oh My Zsh detection before dir check
- Add fpath verification guidance for OMZ installations
- Update cli-completion spec to document generate subcommand
* improve shell detection and installation handling
- Return structured result from detectShell() with shell and detected name
- Detect already-installed completions and skip reinstall
- Add update detection with automatic backup of previous version
- Add debug logging to silent catch blocks for diagnostics
- Quote fpath directories to handle paths with spaces
- Verify Oh My Zsh fpath configuration and add to .zshrc if needed
- Show helpful error for detected but unsupported shells
- Update all tests for new detection API
---------
Co-authored-by: coderabbitai[bot] <136622811+coderabbitai[bot]@users.noreply.github.com>
Co-authored-by: Tabish Bidiwale <30385142+TabishB@users.noreply.github.com>
* fix(cline): use workflows instead of rules for slash commands
- Update ClineSlashCommandConfigurator to use .clinerules/workflows/ paths
- Update tests to expect correct workflow file locations
- Update README.md to reflect workflows instead of rules
- Fixes Cline integration to match Cline's architecture per their blog post
* Adds spec for fix-cline-workflows-implementation
---------
Co-authored-by: didier <didier.boff@axess.fr>
Co-authored-by: Tabish Bidiwale <30385142+TabishB@users.noreply.github.com>
Merged and archived four concurrent changes that modified the same specs:
- add-cline-support: Added Cline AI tool configuration
- add-crush-support: Added Crush AI tool configuration
- add-factory-slash-commands: Added Factory Droid slash commands
- add-archive-command-arguments: Added archive command argument support
Changes to cli-init/spec.md:
- Added Cline and CodeBuddy Code configuration scenarios
- Added slash command scenarios for CodeBuddy Code, Cline, Crush, Factory Droid
Changes to cli-update/spec.md:
- Added update scenarios for CodeBuddy Code, Cline, Crush, Factory Droid
- Added Archive Command Argument Support requirement
- Modified OpenCode scenario to support $ARGUMENTS placeholder
This required manual intervention to prevent data loss from OpenSpec's
requirement-level replacement during archiving. The archive operations
initially overwrote scenarios from earlier changes, requiring restoration
of all missing content to preserve complete spec state.
All four changes successfully archived to openspec/changes/archive/.
Add comprehensive OpenSpec integration for Crush AI assistant including:
- CrushSlashCommandConfigurator for proposal, apply, and archive commands
- Integration with slash command registry and CLI tools
- Generates .crush/commands/openspec/ with proper frontmatter and workflows
- Available via `openspec init --tools crush`
💘 Generated with Crush
Co-authored-by: Crush <crush@charm.land>
* feat: add argument support to archive slash command
Add $ARGUMENTS placeholder to the /openspec:archive slash command to allow explicit change ID specification, improving safety and matching CLI behavior.
Changes:
- Add $ARGUMENTS to archive command frontmatter in OpenCode configurator
- Update archive command template with argument validation steps
- Add rewriteArchiveFile method to handle managed section updates
- Update AGENTS.md documentation for archive command usage
This change makes it possible for users to run `/openspec:archive <change-id>` instead of relying on context inference, reducing the risk of archiving the wrong change.
* refactor: improve archive slash command argument handling instructions
Update the archive slash command template to provide clearer guidance on how
to handle change IDs from arguments versus conversation context. The new
instructions better distinguish between explicit argument-provided IDs and
contextual references, and provide more explicit failure modes.
This change adds support for factory functions in slash command configuration,
allowing slash commands to be defined as functions that return command objects.
* feat: add non-interactive options to openspec init
- Add --tools, --all-tools, and --skip-tools CLI options
- Enable automated initialization for CI/CD pipelines
- Maintain backward compatibility with interactive mode
- Add comprehensive validation and error handling
- Update cli-init spec with non-interactive requirements
- Add unit and integration tests for new functionality
Closes change proposal: add-non-interactive-init-options
* feat(init): add single --tools flag for non-interactive init
* test(init): verify --tools help lists available ids
* Revert manual spec.md edits
The canonical spec shouldn't be edited directly when a change delta
already captures the update. Archiving that delta will sync the spec.
---------
Co-authored-by: Tabish Bidiwale <30385142+TabishB@users.noreply.github.com>
Co-authored-by: Tabish Bidiwale <tabishbidiwale@gmail.com>
Update the tool selection wizard so pressing Enter on a highlighted tool
automatically selects it before proceeding to the review step. This aligns
with common CLI expectations where Enter confirms the highlighted item.
Changes:
- Add logic to select the currently highlighted tool when Enter is pressed
- Update help text to clarify that Enter selects the highlighted tool
- Maintain Space key for toggling multiple selections
This reduces friction during onboarding by matching user expectations,
especially for users who navigate to a tool and press Enter without
first toggling it with Space.
* feat: update Codex slash commands to use YAML frontmatter and $ARGUMENTS
Updates Codex custom slash command format to match the official Codex implementation:
- Replace simple header format with YAML frontmatter (description + argument-hint fields)
- Switch from positional $1 placeholder to $ARGUMENTS for consistency with GitHub Copilot
- Add updateFullFile method to ensure both frontmatter and body are updated during openspec update
- Align with Codex custom_prompts.rs specification
* docs: update Codex proposal to reflect YAML frontmatter and $ARGUMENTS
Updates the proposal to accurately describe the implemented format:
- YAML frontmatter with description and argument-hint fields
- $ARGUMENTS instead of positional placeholders like $1
- Alignment with GitHub Copilot pattern and official Codex specification
- Clarifies that openspec update refreshes both frontmatter and body
* test: update Codex tests for YAML frontmatter and $ARGUMENTS
Updates test assertions to match the new Codex format:
- YAML frontmatter with description and argument-hint fields
- $ARGUMENTS instead of positional $1 placeholders
- Verifies frontmatter is updated during openspec update
* feat: add GitHub Copilot slash command support
Add GitHub Copilot as a natively supported AI tool with custom slash
commands for OpenSpec workflow operations. This enables teams using
GitHub Copilot to access /openspec-proposal, /openspec-apply, and
/openspec-archive directly from Copilot's chat interface.
Implementation:
- Create GitHubCopilotSlashCommandConfigurator that writes prompts to
.github/prompts/ directory with YAML frontmatter and $ARGUMENTS
placeholder following GitHub Copilot's prompt format
- Register GitHub Copilot in AI_TOOLS configuration and slash
command registry for automatic init/update integration
- Add comprehensive test coverage for prompt generation, updates,
and extend mode detection
- Update documentation (README and CHANGELOG) to include GitHub
Copilot in the slash-command support table
The implementation follows the existing SlashCommandConfigurator
pattern and integrates seamlessly with openspec init and openspec
update commands.
* docs: remove GitHub Copilot from tools list
* Document current cli specs and archive safety
* feat: add Codex slash command support
Add support for generating and updating Codex prompts in `.codex/prompts/` directory:
- Implement CodexSlashCommandConfigurator for managing openspec-*.md prompts
- Update AI_TOOLS configuration to include Codex as an available option
- Add Codex registration in SlashCommandRegistry
- Update documentation to reflect Codex support
- Add comprehensive test coverage for Codex init and update workflows
* feat: complete Codex slash command support implementation
Add comprehensive Codex slash command support with Claude.md integration,
config-driven command management, and full test coverage. Update documentation
and changelog to reflect changes.
* chore: mark all Codex slash command tasks as completed
All tasks for the Codex slash command support feature have been implemented and tested.
* docs: remove Codex-specific note from README
Remove the Codex-specific installation note as it's no longer needed in the main setup instructions. This information is better suited for tool-specific documentation.
Implements Kilo Code integration with the following features:
- Added Kilo Code as a selectable AI tool in `openspec init`
- Created KiloCodeSlashCommandConfigurator to generate workflow files
- Generates `.kilocode/workflows/openspec-{proposal,apply,archive}.md`
- Added update support to refresh existing Kilo Code workflows
- Updated README with Kilo Code integration details
- Added comprehensive test coverage for init and update commands
- Updated CHANGELOG with new feature
All tasks from the change proposal are complete.
* feat: implement Phase 1 E2E testing with cross-platform CI matrix
- Add shared runCLI helper in test/helpers/run-cli.ts for spawn testing
- Create test/cli-e2e/basic.test.ts covering help, version, validate flows
- Migrate existing CLI exec tests to use runCLI helper
- Extend CI matrix to bash (Linux/macOS) and pwsh (Windows)
- Update Phase 1 tasks and proposal with implementation status
* fix: correct YAML syntax in CI workflow diagnostics command
* fix: use multiline YAML for diagnostics command
* fix ci
* fix: ci
* fix: update core validation and json converter
* chore(ci): split pr and main workflows
* refactor: simplify CI workflow with unified matrix strategy
- Consolidate test_pr and test_matrix into single test job
- Add proper shell configuration with defaults
- Add timeout protection (15 minutes)
- Simplify required-checks to single job
- Maintain cross-platform testing (bash on Linux/macOS, pwsh on Windows)
* fix: restore lean PR workflow with async main branch matrix
- PRs run only essential tests on ubuntu-latest (fast feedback)
- Main branch runs full cross-platform matrix asynchronously
- Separate required-checks for each workflow type
- Different timeouts: 10min for PR, 15min for matrix
Fixes validation errors on Windows by normalizing CRLF/CR line endings
to LF before parsing sections. Adds comprehensive test coverage for
CRLF handling in both unit and integration tests.
* feat: add CLI e2e testing improvement plan
## Summary
- Add phased approach to stabilize CLI spawn testing
- Expand cross-shell/OS matrix coverage when stable
- Optional packaging validation for CI environments
* feat: add markdown parser CRLF fix proposal and update e2e plan
- Add comprehensive proposal for fixing CRLF parsing issues on Windows
- Update CLI path references from dist/cli.js to dist/cli/index.js
- Streamline e2e testing tasks based on refined approach
* fix: correct spec delta to add parsing requirement instead of modifying remediation
- Change from MODIFIED to ADDED Requirements for cross-platform line ending parsing
- Create focused requirement for parser behavior rather than validation messages
- Maintain logical coherence between requirement and scenario
Tabish Bidiwale