4 Commits

Author SHA1 Message Date
Michał Pierzchała e3c44ea4c3 test(vitest): retire the subprocess-stub kill-criterion experiment (#2255)
* test(vitest): record the subprocess-stub kill-criterion outcome

#1823's kill criterion was met (~64 consecutive genuine Coverage-job
completions since dbc4f2f955 with zero timeout-shaped failures), so
the subprocess-stub project is gone for good rather than mid-experiment.
Rewrite the vitest.config.ts comments to state that resolved outcome
instead of framing it as an ongoing revert-on-first-failure trial.

* test: remove retired subprocess project traces

* test: model the active fuzz worker project
2026-09-03 17:34:17 +02:00
Michał Pierzchała 057b2da233 ci: run coverage in one job again (#2079)
The Coverage lane was split into two matrix shards plus a Coverage Report
job that downloaded both blob reports and merged them. That claimed three
runner slots per PR and put a barrier in front of the merge: the report
job could not start until the slower shard finished, and the blobs it
waited on are tens of MB to upload and download.

One job asks for one slot and reports its own thresholds where it runs, so
the lane finishes when the suite finishes. Everything the split needed goes
with it: the shard/merge switches in vitest.config.ts, the blob reporter
swap, the zeroed per-shard thresholds, and the env blanking that
`test:fuzz-worker` carried only to keep the second leg from inheriting them.
2026-08-27 13:28:54 +02:00
Michał Pierzchała 104fe75248 fix(ci): run the fuzz corpus replay outside the coverage lane (#1994)
The Coverage job intermittently ends with no failing test and one file's
results missing:

    Test Files  1070 passed (1071)
    Errors      1 error
    Error: [vitest-pool]: Worker forks emitted error.
    Caused by: Error: Worker exited unexpectedly

This is shape (B) of #1824 — the half #1854 did not fix. Scanning every
failed Coverage job across the 120 CI runs since #1854 merged finds the
signature five times, and the vanished file is
scripts/fuzz/corpus-replay.test.ts all five (six for six with #1866's
occurrence): 23% of Coverage failures in that window, ~4% of all CI runs.

The ~40s gap before the error is coverage report generation, not test
time — the pool surfaces its AggregateError only once every task settles.
Control, from a green attempt of the same run: the file passes in 3152ms
at 09:37:35.9 and the summary prints at 09:38:12.5. So the file is not
slow in CI, nothing else is in flight when it dies, and neither a missed
per-case budget nor STARTUP_BUDGET_MS is implicated. Partial test counts
(3/11 and 9/11 reported) place the death mid-file, inside runCases.

So the corpus replay gets its own serialized project that the coverage
run skips, and a second uninstrumented Vitest invocation in
`test:coverage:ci` runs it, keeping the tests on every PR. Measured
against two full runs, this costs zero coverage: the cases execute in
worker threads, a separate isolate the fork's inspector never
instruments, so the lines reported are identical with and without it.

Membership is by demonstrated failure, not by a property of the code:
`session-replay-runtime-maestro.test.ts` also constructs a
node:worker_threads Worker and stays in unit-core, instrumented and
green, so "nests a Worker" is explicitly not the criterion.

The second leg goes through `test:fuzz-worker`, which blanks
AGENT_DEVICE_COVERAGE_SHARD and AGENT_DEVICE_COVERAGE_MERGE. ci.yml sets
those as job-level env over a single `gate: unit-ci` step, so both legs
would otherwise inherit them and the shard would die: Vitest refuses
`--shard=1/2` over this one-file project, and the blob reporter
overwrites the instrumented shard's report on its way out. Verified on
the merged tree — shard 1/2 (549 files), shard 2/2 (548), and the merge
job (1097 files, 90.38% lines) all pass, and the leg still fails without
the blanking.

Refs #1824
2026-08-24 17:03:25 +02:00
Michał Pierzchała 9c22467832 refactor(ci): make gate ownership structural (#1429) (#1753)
* test(ci): prove every registered gate is owned and reachable (#1429)

A check that silently stops running looks exactly like a green build. Two
suites had already stopped: `check:tmpdir-leaks` (with its model tests) and
`test:fixture-cache` are real package scripts that no workflow ran, reachable
only through the `check:unit` aggregate CI never invokes.

`CHECK_CATALOG` becomes the registry of every check and `pnpm gate <id>` the
only way CI runs one, so finding what a lane runs is a scan for `pnpm gate`
rather than an attempt to interpret shell. `pnpm check:gate-manifest` then
asserts against the real workflows that every registered check is run by some
qualifying lane (per unit, not per script name), that every check the real
selector activates for a path is run by a lane that path would start (#1420's
class), and that every Vitest project and suite script belongs to a check.

The wiring that keeps those honest is asserted too: a gate id must name a
registered check, an `if:` must be ruled on in GATE_CONDITIONS so `if: false`
unowns what it guards, an action declared to run a gate is proven to, and a
job whose steps the loader cannot open fails closed.

It deliberately does not try to prove CI runs project code only through
`pnpm gate`. Whether a shell block executes project code is not decidable from
its text, so shell this model does not recognise earns no ownership credit —
the failure direction is a check reported unowned, never one waved through.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SkS4S8XXrfkJ8TD1VBKkvJ

* test(ci): update the two suites that assert on rewired workflow text

`scripts/mutation/workflow.test.ts` and `test/ci/trusted-fixture-artifact.test.mjs`
read the workflow and action files and assert on their command text, so routing
those steps through `pnpm gate <id>` moved what they were matching.

They are the two suites the manifest cannot help with: it proves a gate is still
run, not that a test asserting on how CI spells a command was updated with it.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SkS4S8XXrfkJ8TD1VBKkvJ

* fix(ci): credit gates by execution shape, and keep every guard

Three ways the manifest could report a gate as owned when it does not run.

1. Crediting was a substring scan over `run:`, which #1429 explicitly rules
   out — "do not infer reachability from a command name merely appearing in
   workflow text". `false && pnpm gate x`, a gate inside `if false; then … fi`,
   one named in a heredoc, and `echo pnpm gate x` all credited it. There is a
   live instance: conformance-regenerate.yml's "Fail if regeneration changed
   anything" step names `pnpm gate maestro-regenerate` inside an error message
   telling a human to run it, and that credited the gate.

   A gate now counts only as the first command segment of a line, and a body
   carrying shell structure earns nothing. Reachability inside a script is not
   decidable, so this does not try: unrecognised shape means no credit and the
   check reports unowned. `VAR=$(pnpm gate x …)` is read, since the assignment
   form is unambiguous and the gate runs.

2. Job-level `if:` was not modelled at all, though six live jobs carry one, so
   a job that cannot run still credited every gate inside it. Two conditions on
   the mutation lanes are now declared.

3. A caller's `if:` REPLACED the guard on a nested composite-action step
   (`guard[0] ?? step.condition`), so an outer `always()` erased an inner
   `if: false`. Steps carry every guard between the lane and the step.

Also corrects two source comments that still claimed project code run outside
the runner fails the manifest. It does not: such a step earns no credit.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SkS4S8XXrfkJ8TD1VBKkvJ

* ci: add the run-gate action that names a gate structurally

The seam the ownership proof will read instead of shell. A lane says which
gate it runs in `with.gate`, a typed input the manifest reads straight out of
the YAML and validates against CHECK_CATALOG.

Nothing here is wired yet — the ~60 call sites and the model change follow.
Added first so the target of that conversion is reviewable on its own.

`args` cannot select which gate runs; it is appended after the id, so the
worst a wrong value does is fail the gate it already named. There is no
`|| true` and no output capture: the gate's exit code is the step's exit code,
so a gate cannot run without being able to fail its lane.

Part of #1429.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SkS4S8XXrfkJ8TD1VBKkvJ

* merge: main (#1770) and route its three new steps through the runner

#1770 landed the orphan-check fix on main, wiring `check:tmpdir-leaks`,
`check:tmpdir-leaks:test` and `test:fixture-cache` into Coverage, Layering
Guard and Integration Tests. This branch had wired the same three through
`pnpm gate`, so the merge produced two steps per check rather than a conflict
— each check ran twice.

Kept main's steps, with the placement and reasoning reviewed on #1770, and
changed only their `run:` line to the canonical runner. Dropped this branch's
duplicates. Net effect on CI is unchanged: the same three checks, in the same
three lanes, once each.

Gate manifest green after the merge: 47 checks wired across 33 lanes.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SkS4S8XXrfkJ8TD1VBKkvJ

* fix(ci): address review — suite detection, freerange, glob, vacuous skip-list

Six review findings plus the mutation blocker.

[bug] `registered` was shape-only, so a `test:*` script running
`node src/bin.ts test <dir>` resolved to a `script:` leaf and was invisible.
Four `test:replay:*` scripts were owned only because someone hand-registered
them; `test:replay:android` was neither registered nor reported while the
nightly ran the same six .ad files by inlining them. A `test:*` script is now
a suite by name. `replay-android` is registered, and the nightly runs the
script instead of re-listing its files so the two cannot drift.

  The nightly invokes it inside `reactivecircus/android-emulator-runner`'s
  `script:` input — shell handed to a third-party action this loader does not
  read — so the suite executes but cannot be credited. Recorded in
  UNPROVABLE_OWNERS with that exact reason rather than assumed.

  The fixed detector also found a second orphan the review did not name:
  `test:integration:progress`. That one is a reporter whose `--check` sibling
  is the registered gate, so it is declared in REPORTING_SCRIPTS — a
  declaration that itself fails when inert.

[bug] `freerange` defaulted to localRunnable, so fail-open ran `fr` (a Bun
binary) on the pre-push path. Now false.

[suggestion] The `--run` skip-list asserted `build:android-snapshot-helper`,
a name `android-helpers` no longer uses, so it could not fail. Derived from
the catalog instead.

[suggestion] `matchesGlob` joined `**` splits with `.*`, making the adjacent
slash mandatory — GitHub's `**` matches zero directories, so
`src/**/*.test.ts` did not match `src/a.test.ts`. Pinned against
`packages/*/src/**/*.test.ts`.

[suggestion] Deleted the unwired `run-gate` action. It had no callers, was
absent from GATE_ACTIONS, and its comment described a system that had not
shipped. It returns with the rewiring, not before.

[suggestion] Collapsed the module headers that narrated discarded designs.

Mutation: `daemon entrypoint publishes HTTP metadata and cleans up on
shutdown` is the only test here that spawns a real daemon process. It takes
~1.1s alone but exceeds Vitest's 5s default inside Stryker's dry run, which
aborts the sweep before a single mutant runs. Given 30s.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SkS4S8XXrfkJ8TD1VBKkvJ

* fix(mutation): order sandbox aliases longest-first so subpaths resolve

Every shard of the mutation sweep aborted in Stryker's dry run with:

  Cannot find package '@agent-device/selectors/engine' imported from
    .tmp/stryker/sandbox-*/src/core/selector-pipeline.ts

The alias was generated correctly; it just never won. Vite matches a STRING
alias by prefix and takes the first hit, and `workspaceSpecifierTargets`
emitted the bare `@agent-device/selectors` ahead of the subpath entries. The
bare entry therefore captured `@agent-device/selectors/engine` and rewrote it
to `…/src/index.ts/engine`, which does not exist; Node fell back to real
package resolution, could not find the subpath inside the sandbox, and the dry
run failed before a single mutant ran — so the shard uploaded an empty
envelope instead of a report and the ratchet failed for want of one.

Sorting longest specifier first makes the most specific alias win:

  @agent-device/selectors/engine -> packages/selectors/src/engine.ts
  @agent-device/selectors/ast    -> packages/selectors/src/ast.ts
  @agent-device/selectors        -> packages/selectors/src/index.ts

`/ast` never tripped this because nothing in a related test set imported it;
`selector-pipeline.ts` introduced the first subpath import that mattered
(#1744), so the mutation lane has been unable to run since that landed. Any
PR touching `scripts/mutation/**` — which fails open into the full sweep —
would have hit it.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SkS4S8XXrfkJ8TD1VBKkvJ

* refactor: derive gate ownership from workflow structure

* fix: run gates without optional arguments

* fix: resolve mutation workspace subpaths exactly

---------

Co-authored-by: Claude <noreply@anthropic.com>
2026-08-12 16:02:18 +02:00