Previously we would write to class/style as strings `element.className` and `element.style.cssText`. Turns out that approach is good for initial render but not good for updates. Updates using this approach are problematic because we have to check to see if there was an out of bound write to style and than perform reconciliation. This also requires the browser to bring up CSS parser which is expensive.
Another problem with old approach is that we had to queue the DOM writes and flush them twice. Once on element advance instruction and once in `hostBindings`. The double flushing is expensive but it also means that a directive can observe that styles are not yet written (they are written after directive executes.)
The new approach uses `element.classList.add/remove` and `element.style.setProperty/removeProperty` API for updates only (it continues to use `element.className` and `element.style.cssText` for initial render as it is cheaper.) The other change is that the styling changes are applied immediately (no queueing). This means that it is the instruction which computes priority. In some circumstances it may result in intermediate writes which are than overwritten with new value. (This should be rare)
Overall this change deletes most of the previous code and replaces it with new simplified implement. The simplification results in code savings.
PR Close#34804
NOTE: This change must be reverted with previous deletes so that it code remains in build-able state.
This change deletes old styling code and replaces it with a simplified styling algorithm.
The mental model for the new algorithm is:
- Create a linked list of styling bindings in the order of priority. All styling bindings ere executed in compiled order and than a linked list of bindings is created in priority order.
- Flush the style bindings at the end of `advance()` instruction. This implies that there are two flush events. One at the end of template `advance` instruction in the template. Second one at the end of `hostBindings` `advance` instruction when processing host bindings (if any).
- Each binding instructions effectively updates the string to represent the string at that location. Because most of the bindings are additive, this is a cheap strategy in most cases. In rare cases the strategy requires removing tokens from the styling up to this point. (We expect that to be rare case)S Because, the bindings are presorted in the order of priority, it is safe to resume the processing of the concatenated string from the last change binding.
PR Close#34616
The `computeStaticStyling` will be used for computing static styling value during `firstCreatePass`.
The function takes into account static styling from the template as well as from the host bindings. The host bindings need to be merged in front of the template so that they have the correct priority.
PR Closes#34418
This change moves information from instructions to declarative position:
- `ɵɵallocHostVars(vars)` => `DirectiveDef.hostVars`
- `ɵɵelementHostAttrs(attrs)` => `DirectiveDef.hostAttrs`
When merging directives it is necessary to know about `hostVars` and `hostAttrs`. Before this change the information was stored in the `hostBindings` function. This was problematic, because in order to get to the information the `hostBindings` would have to be executed. In order for `hostBindings` to be executed the directives would have to be instantiated. This means that the directive instantiation would happen before we had knowledge about the `hostAttrs` and as a result the directive could observe in the constructor that not all of the `hostAttrs` have been applied. This further complicates the runtime as we have to apply `hostAttrs` in parts over many invocations.
`ɵɵallocHostVars` was unnecessarily complicated because it would have to update the `LView` (and Blueprint) while existing directives are already executing. By moving it out of `hostBindings` function we can access it statically and we can create correct `LView` (and Blueprint) in a single pass.
This change only changes how the instructions are generated, but does not change the runtime much. (We cheat by emulating the old behavior by calling `ɵɵallocHostVars` and `ɵɵelementHostAttrs`) Subsequent change will refactor the runtime to take advantage of the static information.
PR Close#34683
Fixes Ivy detecting changes inside child embedded views, even though they're detached.
Note that there's on subtlety here: I made the changes inside `refreshDynamicEmbeddedViews` rather than `refreshView`, because we support detecting changes on a detached view (evidenced by a couple of unit tests), but only if it's triggered directly from the view's `ChangeDetectorRef`, however we shouldn't be detecting changes in the detached child view when something happens in the parent.
Fixes#34816.
PR Close#34846
Previously, while trying to build an `NgccReflectionHost`'s
`privateDtsDeclarationMap`, `computePrivateDtsDeclarationMap()` would
try to collect exported declarations from all source files of the
program (i.e. without checking whether they were within the target
package, as happens for declarations in `.d.ts` files).
Most of the time, that would not be a problem, because external packages
would be represented as `.d.ts` files in the program. But when an
external package had no typings, the JS files would be used instead. As
a result, the `ReflectionHost` would try to (unnecessarilly) parse the
file in order to extract exported declarations, which in turn would be
harmless in most cases.
There are certain cases, though, where the `ReflectionHost` would throw
an error, because it cannot parse the external package's JS file. This
could happen, for example, in `UmdReflectionHost`, which expects the
file to contain exactly one statement. See #34544 for more details on a
real-world failure.
This commit fixes the issue by ensuring that
`computePrivateDtsDeclarationMap()` will only collect exported
declarations from files within the target package.
Jira issue: [FW-1794](https://angular-team.atlassian.net/browse/FW-1794)
Fixes#34544
PR Close#34811
Since I was learning the codebase and had a hard time understanding what was going on I've done a
bunch of changes in one commit that under normal circumstances should have been split into several
commits. Because this code is likely going to be overwritten with Misko's changes I'm not going to
spend the time with trying to split this up.
Overall I've done the following:
- I processed review feedback from #34307
- I did a bunch of renaming to make the code easier to understand
- I refactored some internal functions that were either inefficient or hard to read
- I also updated lots of type signatures to correct them and to remove many casts in the code
PR Close#34307
skipLibCheck=false is currently the default (in tsc 3.7.4) but it wouldn't be shocking if the default
changed in the future because skipLibCheck=true makes more sense in almost all scenarios. So just to be
defensive and explicit, I'm setting the flag to false even though it's the current default.
PR Close#34798
This release resolves the bootstrap require patching issue with jasmine_node_test. Require patches are now included before any bootstrap scripts.
PR Close#34736
This brings in a few minor fixes including a better way to patch require for bootstrap scripts
Also remove install_source_map_support attribute from nodejs_binary targets This attribute will be removed from nodejs_binary in the future
PR Close#34736
For the purposes of the integration test the zone.js script & bundle script tags can just go into the source index.html itself. The purpose of the integration test is is to test @angular/bazel & ng_module & ng_package so there is no need to exercise html_insert_assets in integration/bazel.
PR Close#34736
For the purposes of the integration test the zone.js script & bundle script tags can just go into the source index.html itself. The purpose of the integration test is is to test @angular/bazel & ng_module & ng_package so there is no need to exercise html_insert_assets in integration/bazel.
PR Close#34589
Previously, if `UmdRenderingFormatter#addImports()` was called with an
empty list of imports to add (i.e. no new imports were needed), it would
add trailing commas in several locations (arrays, function arguments,
function parameters), thus making the code imcompatible with legacy
browsers such as IE11.
This commit fixes it by ensuring that no trailing commas are added if
`addImports()` is called with an empty list of imports.
This is a follow-up to #34353.
Fixes#34525
PR Close#34545
This reverts commit ec7ea77aa8 because it's part
of a PR that was red on CircleCI once it was merged into master (Windows tests
are only run on master, not on PRs).
PR Close#34360
This reverts commit 6b905347bd because it's part
of a PR that was red on CircleCI once it was merged into master (Windows tests
are only run on master, not on PRs).
PR Close#34360
This reverts commit 810b7072d0 because it's part
of a PR that was red on CircleCI once it was merged into master (Windows tests
are only run on master, not on PRs).
PR Close#34360
This reverts commit 4e38a973b1 because it's part of a PR
that was red on CircleCI once it was merged into master (Windows tests are only run
on master, not on PRs).
PR Close#34360
This release brings a bug fix that https://github.com/angular/angular/pull/34243 is waiting on in order to remove rules_nodejs patches: fix(builtin): additional_root_paths in pkg_web should also include paths in genfiles and bin dirs (bazelbuild/rules_nodejs#1402)
PR Close#34112
For the purposes of the integration test the zone.js script & bundle script tags could just go into the source index.html itself. The purpose of the integration test is is to test @angular/bazel & ng_module & ng_package so there is no need to exercise html_insert_assets.
PR Close#34112
This commit updates `@angular/material` and `@angular/cdk` to the
latest release candidate. Doing so exposed a bug in ngcc, which is fixed
by the preceding commit. Also the layout of these libraries changed, so
the checks in the integration test need a bit of tweaking.
PR Close#34212
We should only generate the `providedIn` property in injectable
defs if it has a non-null value. `null` does not communicate
any information to the runtime that isn't communicated already
by the absence of the property.
This should give us some modest code size savings.
PR Close#34116
For injectables, we currently generate a factory function in the
injectable def (prov) that delegates to the factory function in
the factory def (fac). It looks something like this:
```
factory: function(t) { return Svc.fac(t); }
```
The extra wrapper function is unnecessary since the args for
the factory functions are the same. This commit changes the
compiler to generate this instead:
```
factory: Svc.fac
```
Because we are generating less code for each injectable, we
should see some modest code size savings. AIO's main bundle
is about 1 KB smaller.
PR Close#34076
This allows us to update the version of the package in a single place for all tests.
Notable exemption of this is aio which currently doesn't depend on anything installed in the root.
PR Close#34002
Previously, the Angular AOT compiler would always add a
`ɵprov` to injectables. But in ngcc this resulted in duplicate `ɵprov`
properties since published libraries already have this property.
Now in ngtsc, trying to add a duplicate `ɵprov` property is an error,
while in ngcc the additional property is silently not added.
// FW-1750
PR Close#34085
In order to keep integration tests on CI as determinitstic as possible,
we need to ensure that the same dependencies (including transitive ones)
are installed each time. One way to ensure that is using a lockfile
(such as `yarn.lock`) to pin the dependencies to exact versions. This
works as long as the lockfile itself is in-sync with the corresponding
`package.json`, which specifies the dependencies.
Ideally, we would run `yarn install` with the `--frozen-lockfile` option
to verify that the lockfile is in-sync with `package.json`, but we
cannot do that for integration projects, because we want to be able to
install the locally built Angular packages). Therefore, we must manually
esnure that the integration project lockfiles remain in-sync, which is
error-prone.
This commit introduces a helper script that performs some checks on each
project's (non-local) dependencies:
- Ensure that exact versions (not version ranges) are specified in
`package.json`. This reduces the probability of installing a breaking
version of a direct or transitive dependency, in case of an
out-of-sync lockfile.
- Ensure that the lockfile is in-sync with `package.json` wrt these
dependencies.
While these checks are not full-proof, they provide yet another line of
defense against indeterminism.
PR Close#33968
Miško Hevery