Eliminate all the remaining `cpl` names, and use `job` instead, which is the predominant convention.
Also, replace `.views.values()` with `.unit` in a few places, and perform the corresponding rename.
PR Close#52464
In this cleanup commit:
1. Add explanatory comments to all phases that were previously missing them.
2. Rename all phases, to eliminate the "phase" prefix, and directly describe their functions.
PR Close#52464
Recreates the fix for content projection in control flow in the new template pipeline. I also had to make the following adjustments to the pipeline:
1. The `TemplateOp.tag` property was being used to generate the name of the template function, rather than the actual tag name being passed into `ɵɵtemplate`. Since the content projection fix requires the tag name to be passed in, I've introduced a new `functionNameSuffix` property instead.
2. `TemplateOp.block` was being used to determine whether to pass `TemplateOp.tag` into the `ɵɵtemplate` instruction. Now that we're always passing in the tag name after the refactor in point 1, we no longer need this flag.
In addition to the refactors above, I also made some minor cleanups where I saw the opportunity to do so.
PR Close#52414
With the directive-based control flow users were able to conditionally project content using the `*` syntax. E.g. `<div *ngIf="expr" projectMe></div>` will be projected into `<ng-content select="[projectMe]"/>`, because the attributes and tag name from the `div` are copied to the template via the template creation instruction. With `@if` and `@for` that is not the case, because the conditional is placed *around* elements, rather than *on* them. The result is that content projection won't work in the same way if a user converts from `*ngIf` to `@if`.
These changes aim to cover the most common case by doing the same copying when a control flow node has *one and only one* root element or template node.
This approach comes with some caveats:
1. As soon as any other node is added to the root, the copying behavior won't work anymore. A diagnostic will be added to flag cases like this and to explain how to work around it.
2. If `preserveWhitespaces` is enabled, it's very likely that indentation will break this workaround, because it'll include an additional text node as the first child. We can work around it here, but in a discussion it was decided not to, because the user explicitly opted into preserving the whitespace and we would have to drop it from the generated code. The diagnostic mentioned point #1 will flag such cases to users.
Fixes#52277.
PR Close#52414
Fixes that our regex for parsing time values in defer blocks didn't allow for decimals. This isn't relevant for times in milliseconds, but it can be convenient to write something like `on timer(1.5s)`.
PR Close#52433
Adds some logic to skip over comments when resolving implicit `@defer` block triggers. This currently isn't a problem since we don't capture comments by default, but it may come up if we start capturing comments.
PR Close#52449
The previous commits provided the scaffolding for `defer on`. In this commit, we build on that work, adding triggers for `immediate`, `timer`, `hover`, and `viewport`.
PR Close#52387
Previously, we supported a `HasConst` trait, allowing an op to be const collected automatically. However, that approach had the shortcoming that each op could only collect a single constant.
Instead, we now provide a `ConstCollectedExpr`, which collects constants at the expression level, allowing ops to have multiple collectible consts.
Then, we use this new abstraction to support the `defer on` conditions.
PR Close#52387
Previously, we had an "empty shell" implementation of defer conditions, and we used separate ops to represent secondary defer blocks.
Now, we have a real scaffolding for supporting the various defer conditions, and the secondary defer block information has been refactored onto the main defer op.
Additionally, to enable this, we refactor the way that using slot indices works. Instead of having a trait that causes users of slot indices to be linked to the allocated slot, we share a single `SlotHandle` object by reference. This allows an op to use slot information for more than one Xref at a time, and eliminates a layer of indirection.
Co-authored-by: Alex Rickabaugh <alxhub@users.noreply.github.com>
PR Close#52387
The i18n placeholder resolution phase has accumulated too much logic,
making it difficult to understand. This commit refactors it into several
smaller phases to make it easier to manage.
I suspect this will undergo further refactoring in the near future as I
work through the ICU logic. In particular `ExtractedMessageOp` feels
like a bit of a grab bag of properties, and the i18n const collection
phase is also starting to get quite heavy. This refactor at least feels
like a good start.
PR Close#52390
Previously, we would emit *two* pipe creation instructions for each pipe in a switch case. This is because we were visiting both the transformed and raw versions of the pipe bindings.
Now, we clear the raw case expressions array after generating the transformed test expression.
Also, we introduce some new goldens, because our pipe creation order is harmlessly different.
PR Close#52289
We roughly attempt to match TemplateDefinitionBuilder's pipe creation order, by placing pipe creation instructions after their target elements. However, we cannot fully emulate the "inside-out" ordering TemplateDefinitionBuilder uses when multiple pipes apply to one element, because TemplateDefinitionBuilder creates the pipes as expressions are visited, from the leaves up. Our order is perfectly adequate though.
We also add a non-compatibility-mode ordering, which just appends them to the end of the create block. This is better because it allows for more chaining opportunities.
PR Close#52289
Singleton property interpolation instructions consume only one variable, but are still emitted as an interpolation instruction (they cannot be collapsed because `propertyInterpolate` implicitly stringifies its argument.)
PR Close#52289
We were incorrectly emiting a extracted constant pool index for the final argument of the projection instruction. It actually takes an array literal.
(N.B.: This means we re-create the array every time! We should probably modify the runtime to use a const index for this.)
Additionally, we alter the projection op to not extend the element op base type.
PR Close#52289
The correct order of attributes and properties is:
1. Interpolated properties
2. Interpolated attributes
3. Non-interpolated properties
4. Non-interpolated attributes
This includes an additional nuance: singleton attribute interpolations, such as `[attr.foo]="{{bar}}"`, will be "collaped" into a simple `attribute` instruction. However, this is *not* the case for singleton property interpolations! The ordering phase must take this nuance into account to match the TemplateDefinitionBuilder order.
After the project lands, it might be nice to also collapse singleton property interpolations.
PR Close#52289
Previously, we ran the ordering phase near the end of the compilation. However, this meant that phases like slot assignment and variable offset assignment would happen first, and then the nice, monotonically-increasing orders would be scrambled by the reordering.
It's much more intelligible to order first, and then perform these assignments. However, to make this happen, some modifications to the ordering phase are required. In particular, we can no longer rely on `advance` instructions to break up orderable groups.
PR Close#52289
Many instructions consume variable slots, which are used to persist data between update runs. For top-level instructions, the offset into the variable data array is implicitly advanced, because those instructions always run.
However, instructions in non-top-level expressions cannot be assumed to run every time, because they might be conditionally executed. Therefore, they cannot implicitly advance the offset into the variable data, and must be given an explicitly assigned variable offset.
TemplateDefinitionBuilder assigned offsets top-to-bottom for all instructions *except* pure functions. Pure functions would be assigned offsets lazily, on a second pass.
Template Pipeline can now imitate this behavior, when in compatibility mode: pure functions are assigned offsets on a second pass.
This also makes the "variadic var offsets" phase unnecessary -- the new approach is more general and correct.
PR Close#52289
Previously, inside an event listener, template pipeline would always save the context from restoring a view, e.g.
```
const restored_ctx = r0.ɵɵrestoreView(s);
```
This is usually correct! However, consider the case of a listener in the template's root view. The appropriate context will already be available via closure capture, and we can just use it (as `ctx`).
Now, the context resolution phase understands that we don't need to use the restored view's saved context if we would have access to it by closure.
Note: we also create a new golden, because the const array is in a harmlessly different order.
PR Close#52289
Previously, the template pipeline did not handle "empty" reads gracefully: it would emit syntactically invalid reads of empty properties. Now we read `$implicit`.
This allows us to enable a test that relies on `$implicit`. However, we also have to create another golden, because our variable inlining is more aggressive.
PR Close#52289
The template pipeline can now generate track functions, and extract them into the constant pool (or optimize them if needed). Additionally, context variables such as `$index` can be used inside track functions and for loop bodies.
PR Close#52001
Add support for `repeaterCreate` and `repeater` instructions. Correctly count decls and vars, and support primary and empty blocks.
`track` functions are not yet extracted.
PR Close#52001
View compilations previously had context variables, which were variables available in the view that would result in a property read on the context object.
We now also support the notion of aliases. An alias is a variable available in the view compilation, which might be derived from a context variable, which it may reference by name. It is always inlined at all usage sites, and therefore is not allowed to depend on the current context.
Under the hood, aliases rely on the new `AlwaysInline` mode.
Co-authored-by: Alex Rickabaugh <alxhub@users.noreply.github.com>
PR Close#52001
The template pipeline now supports lexical variables that are always inlined into their call sites, even if multiple call sites exist.
An `AlwaysInline` variable may not rely on the current context, because it will potentially be inlined at several different locations.
Co-authored-by: Alex Rickabaugh <alxhub@users.noreply.github.com>
PR Close#52001
Previously, autocompletions were not available in two main cases. We correct them.
1. Autocompletions immediately after `@` were usually not working, for example `foo @|`. We fix this by causing the lexer to not consider the `@` part of the text node.
2. Autocompletions such as `@\nfoo`, where a newline follows a bare `@`, were not working because the language service visitor considered us inside the subsequent text node. We fix this by adding a block name span for the block keyword, and special-case whether we are completing inside the name span. If we are, we don't continue to the following text node.
PR Close#52198
A lot of our tests are wrapped in `{}` which serves no purpose, aside from increasing the nesting level and, in some cases, causing confusion. The braces appear to be a leftover from a time when all tests were wrapped in a `function main() {}`. The function declaration was removed in #21053, but the braces remained, presumably because it was easier to search&replace for `function main()`, but not to remove the braces at the same time.
PR Close#52239
ICUs can be used outside of an i18n block. In this case the ICU should
be automatically wrapped in a new i18n block. This commit adds a new
phase to handle wrapping these bare ICUs.
PR Close#52250
ICU params in i18n messages are now resolved in the post-processing call
rather than in the initial message creation. This matches the output
generated by TemplateDefinitionBuilder.
PR Close#52250
ICUs are now ingested by adding ops to both the creation and update IR.
Both of these ops are ultimately removed before reification, but they
are needed to coordinate and link data between the creation and update
ops. This is done in a new ICU extraction phase that removes both ICU
ops and adds an i18nExpr op to the update IR.
PR Close#52250
Placing a structural directive on an element with an `i18n` attribute
was generating too many i18n blocks. This was due to both the element
and the template generating their own i18n block. To fix the issue, we
no longer generate top-level i18n blocks for structural directive
templates.
PR Close#52202
Structural directives on an ng-template (e.g. <ng-template *ngIf>) were
being assigned the wrong tag name ('ng-template' instead of null).
PR Close#52202
Fixes handling of placeholders for self-closing tags. Self-closing tags
set a combined value for the start tag placeholder, rather than separate
values for the start and close placeholders.
This commit also enables a number of now passing tests. For some of
these tests I had create a separate golden file due to the different
ordering of the const array. In the template pipeline, i18n and
attribute const collection happen in different pahses and we therefore
get a different order than TemplateDefinitionBuilder, which collected
everything in one pass. The order should not affect the overall behavior.
PR Close#52195
The way we were propagating params up to parent i18n ops didn't account
for the fact that a parent and child could both have a value for the
same placeholder. In order to properly merge the value for these cases,
we need to propagate the params up *before* serialization. Therefore I
removed the standalone param propagation phase and folded the logic into
the placeholder resolution phase.
PR Close#52195
I added these in an earlier PR when we were considering moving the empty
elements phase earlier. Since we decided not to do that, this commit
cleans up unnecessary references to the empty versions of the element to
simplify the code and types.
PR Close#52195
Fixes that the compiler was throwing an error if an element tag name is the same as a built-in prototype property (e.g. `constructor` or `toString`). The problem was that we were storing the tag names in an object literal with the `Object` prototype. These changes resolve the issue by creating an object without a prototype.
Fixes#52224.
PR Close#52225
In prod builds, selectors are optimized and spaces a removed. #48558 introduced a regression on selectors without spaces. This commit fixes tihs.
Fixes#49100
PR Close#49118
Currently the compiler allocates a variable slot to the `@for` loop expression which ends up unused since we don't store the result on the `LView`.
PR Close#52158
A new flag added to the component's debug info to determine whether to throw runtime error (in dev mode) if component is being rendered without its NgModule. This flag is only set for non-standalone components.
PR Close#52061
Updates the Ivy AST to allow for `@switch` blocks to capture nested blocks that are not `@case` and `@default`. These blocks will be used for autocompletion in the language service.
These changes also update the logic for `@switch` and `@if` blocks so that they produce an AST node even if there are errors. The errors will still be surfaced to users, but producing AST nodes allows us to recover parts of the expression later if necessary.
PR Close#52136
Dylan Hunn