Add a new boolean attribute to NgOptimizedImage called `fill` which does the following:
* Removes the requirement for height and width
* Adds inline styling to cause the image to fill its containing element
* Adds a default `sizes` value of `100vw` which will cause the image to have a responsive srcset automatically generated
PR Close#47738
Previously, `setDisabledState` was never called when attached if the control is enabled. This PR fixes the bug, and creates a configuration option to opt-out of the fix.
Fixes#35309.
BREAKING CHANGE: setDisabledState will always be called when a `ControlValueAccessor` is attached. You can opt-out with `FormsModule.withConfig` or `ReactiveFormsModule.withConfig`.
PR Close#47576
In AOT compilations, the `strictInjectionParameters` compiler option can
be enabled to report errors when an `@Injectable` annotated class has a
constructor with parameters that do not provide an injection token, e.g.
only a primitive type or interface.
Since Ivy it's become required that any class with Angular behavior
(e.g. the `ngOnDestroy` lifecycle hook) is decorated using an Angular
decorator, which meant that `@Injectable()` may need to have been added
to abstract base classes. Doing so would then report an error if
`strictInjectionParameters` is enabled, if the abstract class has an
incompatible constructor for DI purposes. This may be fine though, as
a subclass may call the constructor explicitly without relying on
Angular's DI mechanism.
Therefore, this commit excludes abstract classes from the
`strictInjectionParameters` check. This avoids an error from being
reported at compile time. If the constructor ends up being used by
Angular's DI system at runtime, then the factory function of the
abstract class will throw an error by means of the `ɵɵinvalidFactory`
instruction.
In addition to the runtime error, this commit also analyzes the inheritance
chain of an injectable without a constructor to verify that their inherited
constructor is valid.
BREAKING CHANGE: Invalid constructors for DI may now report compilation errors
When a class inherits its constructor from a base class, the compiler may now
report an error when that constructor cannot be used for DI purposes. This may
either be because the base class is missing an Angular decorator such as
`@Injectable()` or `@Directive()`, or because the constructor contains parameters
which do not have an associated token (such as primitive types like `string`).
These situations used to behave unexpectedly at runtime, where the class may be
constructed without any of its constructor parameters, so this is now reported
as an error during compilation.
Any new errors that may be reported because of this change can be resolved either
by decorating the base class from which the constructor is inherited, or by adding
an explicit constructor to the class for which the error is reported.
Closes#37914
PR Close#44615
This commit adds a logic that generates preload tags for priority images, when rendering happens on the server (e.g. Angular Universal).
PR Close#47343
This commit exports existing utility functions to check for control instances:
isFormControl, isFormGroup, isFormRecord, isFormArray
Those are useful when implementing validators that use the specifics of one of those control types.
To narrow down the type to what it actually is, we can now use the util functions in validators:
```
export const myArrayValidator: ValidatorFn = (control) => {
if (!isFormArray(control)) { return null; }
// now you can use FormArray-specific members, e.g.:
if (control.controls.every(c => !!c.value) {
return { myerror: true }
} else { return null; }
}
```
PR Close#47718
This commit adds the `provideLocationMocks()` function that returns mocks for the `Location` and `LocationStrategy` classes. This function can be used in tests to configure an environment where it's possible to fire simulated location events (helpful when testing Router configuration).
PR Close#47674
Add a feature to automatically generate the srcset attribute for images using the NgOptimizedImage directive. Uses the 'sizes' attribute to determine the appropriate srcset to generate.
PR Close#47547
This commit switches `provideRouter()` to return the new
`EnvironmentProviders` wrapper type, preventing it from being accidentally
(or intentionally) included in `@Component.providers`.
PR Close#47669
This commit introduces a new type `EnvironmentProviders` which can be used
in contexts where Angular accepted `Provider`s destined for
`EnvironmentInjector`s. This includes contexts such as `@NgModule.providers`
and `Route.providers`.
The new type is useful for preventing such providers from accidentally
ending up in `@Component.providers`. It can be used as the return type of
provider functions (such as `provideRouter`) to enforce this safety.
Because `Provider` allows `any[]` nested arrays, the compile-time safety
provided by `EnvironmentProviders` is easily circumvented. However, the
runtime shape of `EnvironmentProviders` is not compatible with component
injectors and will result in a runtime error if it leaks through (NG0207).
A new function `makeEnvironmentProviders` is used to construct this new type
from an array of providers.
The existing `importProvidersFrom` operation previously returned a very
similar type `ImportedNgModuleProviders` which had the same goal. This
machinery is switched over to use the new `EnvironmentProviders` interface
instead (in fact, `ImportedNgModuleProviders` is now just an alias to
`EnvironmentProviders`).
PR Close#47669
This commit introduces a new `DATE_PIPE_DEFAULT_OPTIONS` token, which
can be used to configure default DatePipe options, such as date
format and timezone.
DEPRECATED:
The `DATE_PIPE_DEFAULT_TIMEZONE` token is now deprecated in favor
of the `DATE_PIPE_DEFAULT_OPTIONS` token, which accepts an object
as a value and the timezone can be defined as a field (called `timezone`)
on that object.
PR Close#47157
Add a new input for banner description with default value, allowing the insertion of other descriptions and if nothing is passed, it assumes a default value.
PR Close#47681
Ordinarily, providing `HttpClient` (either via `provideHttpClient` or the
`HttpClientModule`) creates an entirely separate HTTP context. Requests made
via that client are not passed through the interceptor chains that are
configured in a parent injector, for this example.
This commit introduces a new option for `provideHttpClient` called
`withRequestsMadeViaParent()`. When this option is passed, requests made in
the child context flow through any injectors, etc. and are then handed off
to the parent context.
This addresses a longstanding issue with interceptors where it's not
possible to extend the set of interceptors in a child context without
repeating all of the interceptors from the parent.
PR Close#47502
This commit introduces a new feature for `provideHttpClient` called
`withInterceptors`. This feature exposes and configures the new concept of
functional interceptors.
Functional interceptors use functions instead of classes to implement an
HTTP interceptor. Such interceptor functions have access to the DI context
from the `EnvironmentInjector` in which they're configured via the
`inject()` function. Otherwise, functional interceptors are identical in
capability to the existing interceptor system.
PR Close#47502
This commit converts `HttpClientModule` to use `provideHttpClient()`
internally, with a particular configuration of features. Other NgModules
related to configuring `HttpClient` are also converted to use the providers
directly from various features, to ensure consistency of behavior.
PR Close#47502
This commit introduces the main components of the `provideHttpClient()`
provider API, designed in the style of `provideRouter()`. Initial features
are defined for including legacy class-based interceptors, JSONP support,
and configuring or disabling the builtin XSRF protection.
This API is an alternative to providing `HttpClient` via the
`HttpClientModule`, and is more tree-shakable and more capable than the
NgModule implementation.
Tests are included to validate the new configuration format as well as the
interoperability of the two styles of providing and configuring
`HttpClient`.
PR Close#47502
This commit introduces the `provideHttpClientTesting()` function as an
alternative to the `HttpClientTestingModule` (in fact, the NgModule is
converted internally to just use the new provider function).
PR Close#47502
This commit rewrites the JSONP interceptor to use the functional interceptor
style internally, while still maintaining the same public API and behavior.
PR Close#47502
Enables the new directive composition API by exposing the `hostDirectives` property on the `Directive` and `Component` decorators. Also cleans up some casts that were put in place while the feature was being developed.
Fixes#8785.
PR Close#47642
This commit updates the `RouterLink` to extend the selector to also include `<a>` and `<area>` elements, which were previously matched by the `RouterLinkWithHref` directive. The code of the directives was merged together (since there was a lot of duplication) and this commit finalizes the merge. The `RouterLinkWithHref` becomes an alias of the `RouterLink` directive.
Now there is no need to import and use the `RouterLinkWithHref` class, the `RouterLink` directive will match any element that has the `routerLink` attribute.
DEPRECATED:
The `RouterLinkWithHref` directive is deprecated, use the `RouterLink` directive instead. The `RouterLink` contains the code from the `RouterLinkWithHref` to handle elements with `href` attributes.
PR Close#47630
The `relativeLinkResolution` is no longer supported. The only behavior
now is the correct behavior.
BREAKING CHANGE: `relativeLinkResolution` is no longer configurable in
the Router. This option was used as a means to opt out of a bug fix.
PR Close#47623
This commit updates the `RouterLinkWithHref` class to further align with the `RouterLink` class by removing own constructor from the `RouterLinkWithHref` class.
PR Close#47619
When using `loadChildren` or `loadComponent`, a common pattern is to pass
a function that returns a `Promise` from a dynamic import:
```typescript
{
path: 'lazy',
loadComponent: () => import('./lazy-file').then(m => m.LazyCmp),
}
```
The `.then` part of the expression selects the particular exported
component symbol from the dynamically imported ES module.
ES modules can have a "default export", created with the `export default`
modifier:
```typescript
@Component({...})
export default class LazyCmp { ... }
```
This default export is made available to dynamic imports under the well-
known key of `'default'`, per the ES module spec:
https://tc39.es/ecma262/#table-export-forms-mapping-to-exportentry-records
This commit adds a feature to the router to automatically dereference such
default exports. With this logic, when `export default` is used, a `.then`
operation to select the particular exported symbol is no longer required:
```typescript
{
path: 'lazy',
loadComponent: () => import('./lazy-file'),
}
```
The above `loadComponent` operation will automatically use the `default`
export of the `lazy-file` ES module.
This functionality works for `loadChildren` as well.
PR Close#47586
This commit breaks out the code in @angular/router needed to support the
deprecated `loadChildren` signature into a separate file, which reduces the
opportunity for conflicts when patching that behavior in g3.
PR Close#47586
Adds support for host directives on the root component by calling `findHostDirectiveDefs` and passing the results to the relevant functions.
PR Close#47620
This commit updates the 'name' of `RouterOutlet` to be an `Input` rather
than an attribute. Note that this change does not affect `[attr.name]=`
because those already would not have worked. The static name was only
read in the constructor and if it wasn't available, it would use
'PRIMARY' instead.
fixes#12522
BREAKING CHANGE: Previously, the `RouterOutlet` would immediately
instantiate the component being activated during navigation. Now the
component is not instantiated until the change detection runs. This
could affect tests which do not trigger change detection after a router
navigation. In rarer cases, this can affect production code that relies
on the exact timing of component availability.
PR Close#46569
This commit updates the `RouterLink` directive to use a renderer to apply an `href` attribute value. Previously, the `RouterLinkWithHref` used a host binding for this and that prevented further merge of the `RouterLink` and `RouterLinkWithHref` directives.
PR Close#47605
- This update is needed to implement the changes in `ng add localize` https://github.com/angular/angular/pull/47569
- Add missing `root` options to all `angular.json`, this is required as otherwise the angular.json validation will fail.
- Remove `require.context` from test.ts integration test, as this is no longer needed.
- Update payloads golden files.
PR Close#47584
Previously the built-in image loaders for the optimized image directive
were tightly coupled to the preconnect checks infrastructure. This was
creating a problem when developers were trying to provide a loader on
a component level (or, more generally, deeper in the DI hierarchy):
- PreconnectLinkChecker is the application-level service, provided in root;
- it makes sense to provide loaders in different parts of the DI hierarchy;
This refactoring removes the PreconnectLinkChecker configuration from
the loaders infrastructure and makes it application-wide config. The
PRECONNECT_CHECK_BLOCKLIST is also a simple provider (it was a
multi-provider previously) which should make the overall configuration
easier.
PR Close#47565
Currently, the `RouterLink` and `RouterLinkWithHref` classes share a lot of common code (with some special logic around handling `<a>`-related scenarios). This commit unifies the logic of the mentioned directives by moving the necessary handling to the `RouterLink` directive and making it a parent one for the `RouterLinkWithHref` class (i.e. class RouterLinkWithHref extends RouterLink).
This is the first step in upcoming unification to merge both directives and just keep `RouterLink` one (it'd be done in followup PRs).
PR Close#47500
ActivatedRouteSnapshot data gets mutated in the resolve phase of the Router. The title is assigned as part of this.
As a result, the title must be a getter in order to pick up the value that was note available during the class creation.
fixes#47459
BREAKING CHANGE: The title property is now required on ActivatedRouteSnapshot
PR Close#47481
This commit applies the changes similar to the ones performed for the `inject()` function in https://github.com/angular/angular/pull/46649/commits/df246bb2358794e3aad53870f1554d84bbe390b2.
The `TestBed.inject` function is updated to use previously added object-based API for options: now the flags argument supports passing an object which configures injection flags.
DEPRECATED:
The bit field signature of `TestBed.inject()` has been deprecated, in favor of the new options object.
PR Close#46761
This commit applies the changes similar to the ones performed for the `inject()` function in https://github.com/angular/angular/pull/46649/commits/df246bb2358794e3aad53870f1554d84bbe390b2.
The `Injector.get` function is updated to use previously added object-based API for options: now the flags argument supports passing an object which configures injection flags.
DEPRECATED:
The bit field signature of `Injector.get()` has been deprecated, in favor of the new options object.
PR Close#46761
1. Remove `zone-async-tagging` implementation from zone.js and move the
implementation to `@angular/core`, so `@angular/core` can import this
package more easily for better treeshaking.
2. Add `async tagging zone` implemenation into `@angular/core` package.
So we don't need to get the `AsyncStackTaggingZoneSpec` from `global`
instance, we can import the `class` directly for better treeshaking.
3. Only load this ZoneSpec when `ngDevMode` is `true`.
PR Close#47416
`TNode`s have the `directiveStart` and `directiveEnd` properties that indicate the indexes at which directive instances (including components) have been stored. Currently there are several places throughout the codebase which assume that if a component matches a node, its index will always be `directiveStart`.
As far as I can tell, we probably ended up accumulating these assumptions, because we needed a quick way of accessing the component instance and it happened to be conventiently stored at `directiveStart`. The reason why it's always stored at `directiveStart` is likely to match the lifecycle hook execution order from ViewEngine.
With host directives these assumptions won't be valid anymore, because we want the host directives to _always_ execute before the host component that they're on so that the host has a chance to override them. To achieve this we have to insert host directives before the component.
These changes address the issue by introducing a new `TNode.componentOffset` property which indicates the offset after `TNode.directiveStart` at which the component is stored. Furthermore, I've removed the `isComponentHost` flag since it was duplicating the information from `TNode.componentOffset` and I've audited and fixed all the places where we read `directiveStart` to account for the changed data structure.
Reasons for some of the decisions I made along the way:
* In the case of host directives, I decided to go against our current convention of executing the component lifecycle hooks before the directive, because lifeycle hooks are a chance to change the component state (e.g. in `ngOnChanges`) and running the component hooks first would allow the host directives to undo any overrides made by the host.
* I decided to go with a `componentOffset`, instead of a `componentIndex` indicating the exact index the component is at, because as the runtime is set up at the moment, it would be difficult to know what index the component is going to end up at. Another problem is that we appear to have some logic that moves the entire "directive window" by incrementing both `directiveStart` and `directiveEnd`. By using an offset, we don't have to worry about the index remaining correct.
PR Close#47490
Expands the runtime to allow for basic host directives to be invoked within a template. This is achieved by making a second pass over the directives that were matched based on their selectors and producing a new array of directives that include host directives. Note that the ordering in the array is important, because it determines which host bindings and DI tokens will be overwritten.
PR Close#47430
We have some logic that generates the `InitialInputs` data structure by taking the static attributes of a node and looking them up in the `DirectiveDef.inputs` map to determine if they correspond to an input.
This works fine at the moment, but it will make it trickier to generate the correct `InitialInputs` for host directives, because the `DirectiveDef.inputs` entries might be aliased under a different name.
These changes rework the existing `generateInitialInputs` function so that it does its lookup on the remapped inputs that have accounted for the aliasing process already.
PR Close#47228
This commit updates the payload size for the Animations integration test app. The increase is likely is a result of a number of accumulated changes from various commits merged previously.
PR Close#47424
In a previous refactor, the `RootContext` was update to only contain a reference to a component. This commit perform further refactoring to get rid of the `RootContext` altogether, while storing component reference directly on the root view (without the `RootContext` wrapper).
PR Close#47056
This commit updates the `renderApplication`, `renderModule` and `renderModuleFactory` functions to append a special marker (in a form of an attribute, called `ng-server-context`) to the component host elements. This marker is needed to analyze how a page was rendered.
PR Close#47103
As an ongoing effort to stabilize the NgOptimizedImage API before existing the Developer Preview, this commit renames the `rawSrc` attribute used for the NgOptimizedImage selector matching to `ngSrc`. The `rawSrcset` is also renamed to `ngSrcset` for consistency.
The motivation for this change is to align the attribute name better with other built-in directives, such as `ngFor`, `ngIf`, `ngClass`, `ngStyle`, etc.
Note: this is technically a breaking change, but since the NgOptimizedImage directive is in the Developer Preview mode, we land the change in a patch branch.
PR Close#47362
This commit adds a re-export of the `NgForOf` class as `NgFor` to improve the DX for cases when the directive is used as standalone. Developers can import `NgFor` class, which better matches the `ngFor` attribute used in a template.
PR Close#47309
This option has no longer any effect as Ivy is the only rendering engine.
BREAKING CHANGE: Angular compiler option `enableIvy` has been removed as Ivy is the only rendering engine.
PR Close#47346
This change removed the deprecated `canParse` method from all the TranslationParsers.
BREAKING CHANGE:
- `canParse` method has been removed from all translation parsers in `@angular/localize/tools`. `analyze` should be used instead.
- the `hint` parameter in the`parse` methods is now mandatory.
PR Close#47275
This is the compile-time implementation of the `hostDirectives` feature plus a little bit of runtime code to illustrate how the newly-generated code will plug into the runtime. It works by creating a call to the new `ɵɵHostDirectivesFeature` feature whenever a directive has a `hostDirectives` field. Afterwards `ɵɵHostDirectivesFeature` will patch a new function onto the directive definition that will be invoked during directive matching.
For example, if we take the following definition:
```ts
@Directive({
hostDirectives: [HostA, {directive: HostB, inputs: ['input: alias']}]
})
class MyDir {}
```
Will compile to:
```js
MyDir.ɵdir = ɵɵdefineComponent({
features: [ɵɵHostDirectivesFeature([HostA, {
directive: HostB,
inputs: {
input: "alias"
}
}])]
});
```
The template type checking is implemented during directive matching by adding the host directives applied on the host to the array of matched directives whenever the host is matched in a template.
Relates to #8785.
PR Close#46868
The `UrlTree` is a fundamental concept in the router's API design.
Generally speaking, a `UrlTree` would be constructed via things like
`Router.createUrlTree` or `UrlSerializer#parse`. The second example here
is the core reason to make the constructor public, regardless of how
develpers generally create a `UrlTree` in an application.
Applications can provide their own `UrlSerializer` and may want to implement their
own `parse` method. This means they would also need to create a
`UrlTree` but would not be able to do so effectively because the
constructor is marked `@internal`.
In addition, the `UrlTree` constructor only has 3 parameters, all of
which are already public. There's nothing "special" about it other than
the potential desire to push developers to use other methods for
constructing a `UrlTree` (i.e. `Router.createUrlTree`).
Also see http://b/234604699#comment9 for additional context.
PR Close#47186
This commit adds a console warning in development mode
if the ultimate rendered size of the image is much
smaller than the dimensions of the requested image.
In this case, the warning recommends adjusting the
size of the source image or using the `rawSrcset`
attribute to implement responsive sizing.
PR Close#47082
Alex Castle