The `NgComponentTemplateVisitor` helper was always referring back to the original source file on disk
rather than the virtual file in the migration. This meant that some template migrations could attempt
to modify the template multiple times resulting in invalid output.
As an example the `migration-v13-router-link-empty-expression` migrates the following template:
```
<div [routerLink]></div>
```
to
```
<div [routerLink]="[]"></div>
```
But if the template was referenced multiple times in the program, such as when the component was
referenced in the source and test entry-points, the migration would result in things like:
```
<div [routerLink]="[]"="[]"></div>
```
Fixes#44005.
PR Close#44013
Previously, when parsing code for templates to migrate, CRLF characters were converted to just LF.
This meant that the source-spans being used to overwrite the template strings in the original source code were out of sync with the positions identified in the parsed templates.
This commit fixes this by parsing the raw text of the template taken from the source code instead of processed string contents.
Fixes#44005
PR Close#44013
These tests had been disabled when we initially disabled ViewEngine.
The tests appear to run fine despite this, so we can re-enable them.
PR Close#44013
This reverts commit a268c4471f.
Causes failures in internal team's code. The failures likely relate to
attempting to manually update private Router state tracking properties,
which this change would have affected.
PR Close#44006
This commit adds `ViewRef` to private exports, so it can be reused in internal packages.
The `ViewRef` symbol remains *private* and should not be referenced directly.
PR Close#43978
This schematic is no longer needed since all the [browsers](https://angular.io/guide/browser-support) that Angular supports `CustomElementRegistry` APIs.
Side note: `document-register-element` has been deprecated in favor of `@ungap/custom-element`
PR Close#43975
The `InjectFlags` argument was defined for both `getOrCreateInjectable()` and `Injector`, but was ignored in `NodeInjector`.
This PR adds support for getting parent token via `NodeInjector.get()`.
close#31776
PR Close#41592
Other parts of the intialization process are responsible for passing the locale id to ivy, so it does not need to happen in the provider factory. E.g. `PlatformRef.bootstrapModule()` and `R3TestBedCompiler.finalize()`.
PR Close#43913
With this change we remove no longer needed migrations. These migrations are no longer accessible following a change angular/angular-cli#21986 in the Angular CLI. The CLI now shows an error message when users try to update `@angular/` and `@nguniversal/` packages across multiple major versions.
Example to update from version 11 to version 13 the recommand approach is to run the following commands
```
ng update @angular/core@12
ng update @angular/core@13 (which is the same as ng update @angular/core)
```
NB: It is recommand that when update from one major to another, users verify that their applications is working as expected.
PR Close#43947
Enables code spitting for ESBuild bundling of the localize/tools entry
point. When we initially configured ESBuild as part of APF v13, we left
this option disabled as code splitting is marked experimental. The ESM
splitting mechanism in ESBuild seems very solid so far (judging subjectively
and by experience/reports in the ESBuild repo), so we should give it a shot,
in order to significantly reduce the size of the NPM package, and simplify
debugging (by not having duplicated code portions for all the different entry points).
To clarify: Code splitting is helpful as we have multiple entry-points
that currently duplicate code. With code splitting these entry-points
would share common code instead.
PR Close#43932
Enables code spitting for ESBuild bundling of the compiler-cli. When
we initially configured ESBuild as part of APF v13, we left this option
disabled as code splitting is marked experimental. The ESM splitting
mechanism in ESBuild seems very solid so far (judging subjectively
and by experience/reports in the ESBuild repo), so we should give
it a shot, in order to significantly reduce the size of the NPM package,
and simplify debugging (by not having duplicated code portions for all
the different entry points).
To clarify: Code splitting is helpful as we have multiple entry-points
that currently duplicate code. With code splitting these entry-points
would share common code instead.
PR Close#43932
Modified minlength and maxlength validator to inherit abstractValidator
For every validator type different PR will be raised as discussed in #42378.
Closes#42267
PR Close#43835
Prior refactorings caused unexpected g3 sync issues due to a patch that
changes the error documentation URL. This commit moves the base url into
a separate file to make this more apparent.
PR Close#43527
The `ErrorCode` enum in the `error_code.ts` file is governed by public
api guards but the other top-level exports from that file are exempt
from public api documentation and are therefore marked as `@internal`.
However, TypeScript is configured with the `stripInternal` compiler
option such that declarations with `@internal` markers are not emitted
into the `.d.ts` files, but this means that the reexports in the barrel
file end up referring to missing declarations.
The `stripInternal` option is considered internal and its documentation
states to use at your own risk (as per https://github.com/microsoft/TypeScript/issues/45307).
Having the option enabled is desirable for us as it works well for
hiding class fields that are marked `@internal`, which is an effective
way to hide members from the .d.ts file. As a workaround for the issue
with top-level symbols, the declarations with `@internal` markers are
moved to dedicated files for which no public api guard is setup,
therefore allowing their `@internal` markers to be dropped.
Fixes#43097
PR Close#43527
With this change we remove no longer needed migrations. These migrations are no longer accessible following a change https://github.com/angular/angular-cli/pull/21986 in the Angular CLI. The CLI now shows an error message when users try to update `@angular/` and `@nguniversal/` packages across multiple major versions.
Example to update from version 11 to version 13 the recommand approach is to run the following commands
```
ng update @angular/core@12
ng update @angular/core@13 (which is the same as ng update @angular/core)
```
NB: It is recommand that when update from one major to another, users verify that their applications is working as expected.
PR Close#43942
The bootstrap tests that reused the same component (the `HelloRootCmp` one) were randomly failing due to the incomplete cleanup between tests. This commit ensures that the component bootstrap is fully cimpleted and there are no pending async actions before going to the next test.
PR Close#43933
In #43879, `UmdReflectionHost` was updated to deal with the new UMD
format used by Rollup, where the parenthesis is around the wrapper
function and not the wrapper function call.
For reference, this caused failures in the `ngcc-validation` repo
([example 1][1], [example 2][2]).
This commit updates `UmdRenderingFormatter` to also handle both UMD
formats. In order to validate the change, this commit also updates the
`UmdRenderingFormatter` tests to run against both UMD formats.
[1]: https://circleci.com/gh/angular/ngcc-validation/65916
[2]: https://circleci.com/gh/angular/ngcc-validation/65758
PR Close#43931
Currently, it's impossible to cache (detach/attach) parent route without caching child routes.
This produces a bug, when navigating from a/b to c, then to a/d, where a route is cached.
On the last navigation, we incorrectly restore a/b route instead of a/d.
This change introduces new behavior: if the route should be detached/attached,
we do so, but we check also child routes recursively.
Fixes#17333
PR Close#43791
When an app version is detected as broken, the SW calls the
`Driver#versionFailed()` method. Previously, this method would in turn
call the `Driver#sync()` method, which writes some metadata about the
SW's state to the `ngsw:/:db:contol` cache. More specifically,
`Driver#sync()` persists info about all known app versions, which one is
the latest and also what version each client is assigned to.
However, no relevant info is changed inside `Driver#versionFailed()`, so
the call to `Driver#sync()` is redundant (since there are no changes
that need to be synced with the cache). This is a left-over from
before #43518, when `Driver#versionFailed()` used to update version
assignments and thus did require synchronization with the cache.
This commit removes the redundant `Driver#sync()` call to avoid an
unnecessary write to the cache.
PR Close#43680
This commit re-enables the `perform_watch` test target and updates the
test to run with the Ivy compiler.
Additionally, this target was switched over to use Angular v12 packages
as input to the test, to allow the ViewEngine tests to continue working
with v13 packages which are Ivy-only. This commit reverts those changes
now that View Engine tests are disabled, as it's desirable to test
against local artifacts that are build within the monorepo instead of
depending on NPM packages.
PR Close#43893
The View Engine compiler now throws when constructed and will be removed shortly. Direct users should switch to `NgtscProgram` to build with [Ivy](https://angular.io/guide/ivy). The View Engine compiler is being removed, so this makes it throw an error to ensure no one accidentally depends on code being removed.
PR Close#43862
Remove the ivy-aot bazel tag from usage as it served a duplicate purpose as ivy-only which is now removed as both are
unneeded with Ivy as the default compiler used.
PR Close#43862
Using the tag "view-engine-only" better describes the expected usage of bazel targets with the test. They can
only be run with view engine.
PR Close#43862
Since building with ViewEngine is not longer desired on CI, removing the ivy vs non-ivy testing yarn scripts
is done, informing developers to instead use `yarn test` as all tests should be run using the Ivy complier.
PR Close#43862
Setting the angular_ivy_enabled environment variable to True will default Bazel builds to use the Ivy
compiler rather than defaulting to ViewEngine.
PR Close#43862
Recently rollup, used by ng-packagr, changed the position of parentheses
around its generated UMD wrapper functions.
This commit ensures that ngcc can handle both.
Fixes#43870
PR Close#43879
This reverts commit bba0a87055.
The reason for rollback: this change is breaking some targets in Google's codebase when there is no attribute value is displayed (attr.aria-label) when translated.
PR Close#43882
Experimentation with the Router URL management exposed a situation where
the `currentNavigation` was being cleared in the `finalize` after the
`currentNavigation` was already set to the next one.
This change ensures that the `currentNavigation` is only cleared if the
id of the finalized transition matches the one on the
`currentNavigation` object.
PR Close#43852
There are no added tests here because the change is generally equivalent
to what was there before. The goal of that piece of code is to prevent
duplicate navigations due to the location synchronization code between
AngularJS and Angular. That is, the Angular router listens to the
`popstate` event and triggers navigations, but so does the AngularJS
router and triggers navigations through `router.navigateByUrl`. The
`setTimeout` in the Angular Router's `setUpLocationChangeListener` is
there to make this bit of code work: the 'popstate'/'hashchange'
navigation will necessarily come after the imperative nav triggered by
AngularJS's location sync.
Anyhow, in the long run, I would like to get rid of this bit of code
altogether. We should not have special handling for these cases. The
AngularJS/Angular location sync should either:
1. Not trigger a duplicate navigation in the first place
or
2. Be tolerant to processing the duplicate navigation.
In the short term, this change benefits the router while we investigate
removing this logic completely because now browserUrlTree has a single
responsiblity: to support `onSameUrlNavigation==='reload'`. This means
that we can work towards removing the `browserUrlTree` tracking from the
Router code at some point as well and have the `onSameUrlNavigation`
logic be part of a pre-navigation hook that can be handled outside the
`Router`. This may or may not be possible, but the change here opens up
that change for investigation.
PR Close#43632
While fully dynamic bound properties (and attributes) cannot be marked for localization, properties that only contain interpolation can.
This commit ensure that attribute bindings that only contain interpolation can also be marked for localization.
Closes#43260
PR Close#43815
When extracting i18n messages from templates, ICU messages are split out from the
message that contains them. This can make it difficult in the translation files to match up
the two messages, especially if the ICU is reused in multiple placeholders.
This commit builds on top of the previous one to expose the message ID of ICU messages
from the ICU placeholders as additional metadata in the `$localize` tagged strings.
Now the metablock following any placeholder can also contain the associated ID
delimited from the placeholder name by `@@`.
Fixes#17506
PR Close#43534
When extracting i18n messages, the Angular compiler needs to split ICU expressions
into their own message. Currently there is no guaranteed way to re-associate
the ICU message with the original message where the ICU was found.
This change adds support in the localize tooling so that associated ids can be
stored as metadata in the `$localize` tagged strings. These ids can then be
used in generated translation files to provide a link between the two messages.
The XLIFF 1.2 and 2.0 formats have been updated to render these relationships,
via the `xid` and `subFlows` attributes respectively.
PR Close#43534
The commit which made the `canceledNavigationResolution` property on the `Router`
public did not add the corresponding configuration in the `ExtraOptions`.
https://github.com/angular/angular/commit/3c6b653089837459809a370ebcaf8911c3bab9ed
This was a mistake and is being corrected in this commit. We should not
encourage changing the properties post-setup (i.e.
`inject(Router).canceledNavigationResolution = 'computed'`). This manner
of configuration makes the options non-tree shakeable because we have to
keep both implementations in case the value changes at runtime.
PR Close#43842
Paul Gschwendtner