No test was added for this case because I can't think of a test case to
write that would work.
This change updates the code for a consistent mental model of setting
the `browserUrlTree`. It's only meant to track the `UrlTree` that the
`UrlHandlingStrategy` is set to extract, not the full `rawUrl`. Notice
that everywhere else, the `browserUrlTree` is set to
`urlAfterRedirects`, which is computed based on the extracted URL, _not_
the `rawUrl`.
PR Close#43426
PR #43102 broke some use-cases. These tests document expected behavior
and would have prevented #43446 and #43447. Recent changes have already
addressed these issues, but it would still be a good idea to cover these
use-cases in tests as well.
PR Close#43449
The previous code would set the browser URL to be only the part that's
extracted by the `UrlHandlingStrategy`. However, there may be parts of
the URL which are _should not_ be handled by the Angular Router. This
change updates the code to set the browser URL in the same way that's
done with `'deferred'`: Merging the extracted URL after redirects with
the whole raw URL of the navigation, which includes parts not handled by
the `UrlHandlingStrategy`.
PR Close#43421
There are situations where the Router does not currently clean up failed navigations
correctly. While this is problematic on its own, we can mitigate some of
the damage by processing any URL when we get a navigation request when
the internal router state is out of sync.
Each of the added tests would fail without this change.
fixes#34795
PR Close#43424
* Document `currentUrlTree`, `browserUrlTree`, and `rawUrlTree`
* Add a couple `TODO` comments to investigate changes based on understanding
PR Close#43391
This restores the `finalize` function to directly call
`resetUrlToCurrentUrlTree`, as it was before efb440eb2f.
This allows us to simplify the `restoreHistory` function because it no
longer needs to handle the call from `finalize` where it should not
reset the internal router state.
PR Close#43382
With the merging of #41730, our tests now more closely emulate real
browser behavior. This means that we can make changes to the `Router` which depend
on actual browser behavior rather than incorrectly mocked test behavior.
This change updates the logic in the `Router` to only trigger
navigations on `popstate` events. Since our `SpyLocation` now triggers
the `popstate` event correctly on `simulateHashChange`, `back`,
`forward`, and `simulatePopState`, we are able to rely on this being
true for all of these navigations in tests when using `SpyLocation` (the
default for `RouterTestingModule`).
In addition, this behavior relies on documented browser behavior: The
`popstate` event happens due to browser transitions as a result of user
triggered "back" button or otherwise.
https://developer.mozilla.org/en-US/docs/Web/API/Window/popstate_event#when_popstate_is_sent
In addition, this change chooses `popstate` over `hashchange` because it
is the event that is already being used for navigations since the
documented behavior of browsers is that `popstate` happens before
`hashchange`.
fixes#41782
PR Close#43328
Exposes implementation from #38884 as a public opt-in option.
From that commit:
> We can’t determine whether the user actually meant the back or
> the forward using the popstate event (triggered by a browser
> back/forward)
> so we instead need to store information on the state and compute the
> distance the user is traveling withing the browser history.
> So by using the History#go method,
> we can bring the user back to the page where he is supposed to be after
> performing the action.
Resolves#13586
PR Close#43289
* Do not emit url pop on Location.go
* Emit a `popstate` event before each `hashchange` to have the same
behavior of the browser.
* Track the url change in the internal history when calling `simulateHashChange`
The changes to the router tests reflect the goals of the test.
Generally when `Location.go` is used to trigger navigations, it is only
relevant for `HashLocationStrategy` and verifying that the Router picks
up changes from manual URL changes. To do this, we convert those calls
to `simulateHashChange` instead.
Manual URL bar changes to the path when not using the `HashLocationStrategy`
would otherwise trigger a full page refresh so they aren't relevant to
these test scenarios which assert correct behavior during the lifetime
of the router.
[Reference for no `popstate` on `pushState`/`replaceState`](https://developer.mozilla.org/en-US/docs/Web/API/Window/popstate_event)
> Note that just calling history.pushState() or history.replaceState() won't
trigger a popstate event. The popstate event will be triggered by doing a browser
action such as a click on the back or forward button (or calling history.back()
or history.forward() in JavaScript).
[Reference for `popstate` before `hashChange`](https://developer.mozilla.org/en-US/docs/Web/API/Window/popstate_event#when_popstate_is_sent)
> When the transition occurs, either due to the user triggering the browser's
> "Back" button or otherwise, the popstate event is near the end of the process to transition to the new location
...
> 12. If the value of state changed, the popstate event is sent to the document.
> 13. Any persisted user state is restored, if the browser chooses to do so.
> 14. If the original and new entry's shared the same document, but had different fragments in their URLs, send the hashchange event to the window.
BREAKING CHANGE:
The behavior of the `SpyLocation` used by the `RouterTestingModule` has changed
to match the behavior of browsers. It no longer emits a 'popstate' event
when `Location.go` is called. In addition, `simulateHashChange` now
triggers _both_ a `hashchange` and a `popstate` event.
Tests which use `location.go` and expect the changes to be picked up by
the `Router` should likely change to `simulateHashChange` instead.
Each test is different in what it attempts to assert so there is no
single change that works for all tests. Each test using the `SpyLocation` to
simulate browser URL changes should be evaluated on a case-by-case basis.
fixes#27059
PR Close#41730
Previously, the error message was not added to `Unhandled Navigation Error`
Before
```
main.js:1 Unhandled Navigation Errors:
```
After
```
main.js:1 Unhandled Navigation Errors: SecurityError: Failed to execute 'replaceState' on 'History': A history state object with URL 'http://localhost:4200/' cannot be created in a document with origin 'http://127.0.0.1:8080' and URL 'http://127.0.0.1:8080/'.
```
PR Close#43291
This commit adds a new output to `routerLinkActive` directive.
Whenever, the associated link becomes active or inactive, an
event will be fired on this out with the correct status
PR Close#37284
PR Close#43280
The current behavior of `routerLink` for `null` and `undefined` inputs is to treat
the input the same as `[]`. This creates several unresolvable issues with
correctly disabling the links because `commands = []` does _not_ behave the same
as disabling a link. Instead, it navigates to the current page, but will also
clear any fragment and/or query params.
The new behavior of the `routerLink` input will be to completely disable navigation
for `null` and `undefined` inputs. For HTML Anchor elements, this will also mean
removing the `href` attribute.
Fixes#21457Fixes#13980Fixes#31154
BREAKING CHANGE:
Previously `null` and `undefined` inputs for `routerLink` were
equaivalent to empty string and there was no way to disable the link's
navigation.
In addition, the `href` is changed from a property `HostBinding()` to an
attribute binding (`HostBinding('attr.href')`). The effect of this
change is that `DebugElement.properties['href']` will now return the
`href` value returned by the native element which will be the full URL
rather than the internal value of the `RouterLink` `href` property.
PR Close#43087
The management of `browserUrlTree` currently has several problems with
correctly tracking the actual state of the browser.
This change makes the Router eagerly update the `browserUrlTree` when
handling navigations triggered by browser events (i.e., not 'imperative'). This
is because with those types of navigations, the browser URL bar is
_already_ updated. If we do not update the internal tracking of the
`browserUrlTree`, we will be out of sync with the real URL if the
navigation is rejected.
It would be best if we could remove `browserUrlTree` completely, but doing that
would require a lot more investigation and is blocked by #27059 because
the SpyLocation used in tests does not emulate real browser behavior.
fixes#43101
PR Close#43102
According to the URI spec, question mark characters are valid in query data,
so these should accepted by the param parsing.
See https://tools.ietf.org/html/rfc3986#section-3.4Fixes#31116
BREAKING CHANGE: The default url serializer would previously drop
everything after and including a question mark in query parameters. That
is, for a navigation to `/path?q=hello?&other=123`, the query
params would be parsed to just `{q: 'hello'}`. This is
incorrect because the URI spec allows for question mark characers in
query data. This change will now correctly parse the params for the
above example to be `{v: 'hello?', other: '123'}`.
PR Close#31187
We can't update the framework to rxjs7 until version 13, because it contains breaking changes, but we can allow users to opt into it since all of our code should be compatible.
These changes expand the allowed version range of rxjs and add an integration test to verify that we don't get compilation errors. Note that we also have a test that runs the AIO examples against rxjs 7 already (#42660).
Fixes#41897.
PR Close#42991
This commit renames shims_for_IE.js -> shims_for_internal_tests.js, since there are no IE shims there anymore (there are still shims for older Safari and Android versions).
PR Close#43002
For now it's not possible to provide custom route reuse strategy via DI
for `RouterTestingModule`, only imperative instantiation. These changes
makes it possible to provide custom route reuse strategy via DI.
PR Close#42434
When `canceledNavigationResolution='computed'`, the `Router` needs to
handle the cases where errors are thrown. Previously, the logic was not
updated and would simply do a `replaceState` rather than determining
where in the history we should move to restore the page/url from before
the failed navigation.
PR Close#42933
Without the `import {Event} from '@angular/router';`, the filter will
not work because the type is understood as the native `Event`.
Fixes#42920
PR Close#42935
In combination with the TS `noImplicitOverride` compatibility changes,
we also want to follow the best-practice of adding `override` to
members which are implemented as part of abstract classes. This
commit fixes all instances which will be flagged as part of the
custom `no-implicit-override-abstract` TSLint rule.
PR Close#42512
When another navigation is triggered during an in-process navigation and
the `canceledNavigationResolution` is `'computed'`, we should not
attempt to restore the browser history using `history.go`. Doing that
would trigger a third navigation through the router which would conflict
with the new navigation that we were trying to process. Instead, we
treat this as a redirect and skip the history restoration attempt. This
acts similarly to returning `UrlTree` from a guard.
Fixes issue described in https://github.com/angular/angular/pull/38884#issuecomment-863767152
PR Close#42751
Previously, we used custom typings for the ServiceWorker environment.
This was necessary back when the ServiceWorker package was introduced,
since there were no official typings.
Since there are now official typings for Web Workers (including
ServiceWorkers) offered by TypeScript as [lib.webworker.d.ts][1], this
commit gets rid of our custom typings in favor of using the official
ones.
[1]: https://github.com/microsoft/TypeScript/blob/v4.3.4/lib/lib.webworker.d.ts
PR Close#42736
This is something I ran into while working on a fix for the `TestBed` module teardown behavior for #18831. In the `RouterInitializer.appInitializer` we have a callback to the `LOCATION_INITIALIZED` which has to do some DI lookups. The problem is that if the module is destroyed before the location promise resolves, the `Injector.get` calls will fail. This is unlikely to happen in a real app, but it'll show up in unit tests once the test module teardown behavior is fixed.
PR Close#42560
We can’t determine whether the user actually meant the `back` or
the `forward` using the popstate event (triggered by a browser
back/forward)
so we instead need to store information on the state and compute the
distance the user is traveling withing the browser history.
So by using the `History#go` method,
we can bring the user back to the page where he is supposed to be after
performing the action.
implementation for #13586
PR Close#38884
`onSameUrlNavigation` only affects whether the Angular Router
processes the URL and runs it through the navigation pipeline,
retriggering redirects, guards, and resolvers. The name `reload` is a
little confusing because it does _not_ reload the component. Developers
_also_ need to implement a custom `RouteReuseStrategy` to trigger a
component reload on same URL navigation.
Fixes#21115
PR Close#42275
corrects a bug that resulted in query params such as
`[queryParams]={a: 1, b:[]}` being serialized as 'a=1&'
instead of 'a=1'
resolves#42445
PR Close#42481
For quite a while it is an unspoken convention to add a trailing
new-line files within the Angular repository. This was never enforced
automatically, but has been frequently raised in pull requests through
manual review. This commit sets up a lint rule so that this is
"officially" enforced and doesn't require manual review.
PR Close#42478
Switches the repository to TypeScript 4.3 and the latest
version of tslib. This involves updating the peer dependency
ranges on `typescript` for the compiler CLI and for the Bazel
package. Tests for new TypeScript features have been added to
ensure compatibility with Angular's ngtsc compiler.
PR Close#42022
Previously the docs were very minimalistic. The most important thing missing from the docs
was that people should primarily use higher level APIs instead of using ROUTES directly.
It would be nice to holistically overhaul more of the router API docs, but that's out of
scope of this change.
Fixes#39350
PR Close#42398
We have some internal proxies for all of the Jasmine functions, as well as some other helpers. This code hasn't been touched in more than 5 years, it can lead to confusion and it isn't really necessary since the same can be achieved using Jasmine.
These changes remove most of the code and clean up our existing unit tests.
PR Close#42177
Add small clarity to sentence in documentation for navigation cancel event
to indicate that router guards returning false or urlTree is only one of
several reasons a NavigationCancel event happens.
fixes#26613
PR Close#42282
Update the supported range of node versions for to be less restrictive, no longer causing
yarn or npm to fail engine's checks for future versions of node.
While this change will no longer cause yarn or npm to fail these engine's check, this does
not reflect a change in the officially supported versions of node for Angular. Angular
continues to maintain support for Active LTS and Maintenance LTS versions of node.
PR Close#42205
This commit clarifies the description of the default `pathMatch`
strategy (prefix) to indicate that the path segments must each match to
a config.
fixes#39737
PR Close#42287
Remove publishConfig property from the package.json entry for each of the entries in
the publish configuration. Using the wombat proxy is now ensured/managed by the
ng-dev release tooling.
PR Close#42104
This situation can probably happen only when using
`HashLocationStrategy` and by manually changing hash that triggers a route
guard that returns a new `UrlTree`. Then hash in the browser might not
match the current route because navigation was canceled, while hash in
the URL remained set by the user.
Related to #37048
PR Close#40409
Andrew Scott