The fix from PR #55079 introduced a configuration of the injector chain, which wasn't properly handled by the injector debug utils, thus resulting in JS exceptions in DevTools. This commit updates injector debug utils logic that calculates injector resolution path to also handle `ChainedInjector`s.
Resolves#55137.
PR Close#55144
This commit ensures components in the route config predictably always
get their providers from the hierarchy available to routes rather than
sometimes being dependent on where they are inserted.
fixes#53369
BREAKING CHANGE: Providers available to the routed components always
come from the injector heirarchy of the routes and never inherit from
the `RouterOutlet`. This means that providers available only to the
component that defines the `RouterOutlet` will no longer be available to
route components in any circumstances. This was already the case
whenever routes defined providers, either through lazy loading an
`NgModule` or through explicit `providers` on the route config.
PR Close#54265
This commit updates the `@defer` logic to establish proper injector resolution order. More specifically:
- Makes node injectors to be inspected first, similar to how it happens when `@defer` block is not used.
- Adds extra handling for the Router's `OutletInjector`, until we replace it with an `EnvironmentInjector`.
Resolves#54864.
Resolves#55028.
Resolves#55036.
PR Close#55079
Passes the attributes of the `ng-content` element to the container that is created for the fallback content so that it can be re-projected into the same slot.
PR Close#54854
Adds the ability to specify content that Angular should fall back to if nothing is projected into an `ng-content` slot. For example, if we have the following setup
```
@Component({
selector: 'my-comp',
template: `
<ng-content select="header">Default header</ng-content>
<ng-content select="footer">Default footer</ng-content>
`
})
class MyComp {}
@Component({
template: `
<my-comp>
<footer>New footer</footer>
</my-comp>
`
})
class MyApp {}
```
The instance of `my-comp` in the app will have the default header and the new footer.
**Note:** Angular's content projection happens during creation time. This means that dynamically changing the contents of the slot will not cause the default content to show up, e.g. if a `if` block goes from `true` to `false`.
Fixes#12530.
PR Close#54854
Previously only the first branch of an `if` block was captured for content projection. This was done because of some planned refactors in the future. Since we've decided not to apply those refactors to conditionals, these changes update the compiler to capture each branch individually for content projection purposes.
PR Close#54921
This commit changes the way we use containers to insert conditional content.
Previously if and switch conditional would always use the first content as the
insertion container. This strategy interfered with content projection that
projects entire containers - as the consequence content for _all_ cases would
end up in slot matched by the first container. This could be very surprising
as desicribed in https://github.com/angular/angular/issues/54840
After the change each conditional content is projected into its own container.
This means that content projection can match more than one container and
result in correct display.
Fixes#54840
PR Close#54921
Currently when aliasing a `for` loop variable with `let`, we replace the variable's old name with the new one. Since users have found this to be confusing, these changes switch to a model where the variable is available both under the original name and the new one.
Fixes#52528.
PR Close#54942
Previously we assumed that if a `for` loop tracking function is in the form of `someMethod($index, $item)`, it will be pure so we didn't pass the parameter to bind the context to it. This appears to be risky, because we don't know if the method is trying to access `this`.
These changes play it safe by always binding method-based tracking functions.
Fixes#53628.
PR Close#54960
This commit ensures components in the route config predictably always
get their providers from the hierarchy available to routes rather than
sometimes being dependent on where they are inserted.
fixes#53369
BREAKING CHANGE: Providers available to the routed components always
come from the injector heirarchy of the routes and never inherit from
the `RouterOutlet`. This means that providers available only to the
component that defines the `RouterOutlet` will no longer be available to
route components in any circumstances. This was already the case
whenever routes defined providers, either through lazy loading an
`NgModule` or through explicit `providers` on the route config.
PR Close#54265
This commit updates the loop in ApplicationRef.tick to only throw in dev
mode. In addition, it reduces the reruns to 10 from 100 in order to
reduce the impact on production applications that encounter this error.
That is, the loop will bail out much earlier and prevent prolonged
unresponsiveness.
PR Close#54848
This commit resolves a regression that was introduced when the compiler switched from
`TemplateDefinitionBuilder` (TDB) to the template pipeline (TP) compiler. The TP compiler
has changed the output of
```html
if (false) { <div class="test"></div> }
```
from
```ts
defineComponent({
consts: [['class', 'test'], [AttributeMarker.Classes, 'test']],
template: function(rf) {
if (rf & 1) {
ɵɵtemplate(0, App_Conditional_0_Template, 2, 0, "div", 0)
}
}
});
```
to
```ts
defineComponent({
consts: [[AttributeMarker.Classes, 'test']],
template: function(rf) {
if (rf & 1) {
ɵɵtemplate(0, App_Conditional_0_Template, 2, 0, "div", 0)
}
}
});
```
The last argument to the `ɵɵtemplate` instruction (0 in both compilation outputs) corresponds with
the index in `consts` of the element's attribute's, and we observe how TP has allocated only a single
attribute array for the `div`, where there used to be two `consts` entries with TDB. Consequently,
the `ɵɵtemplate` instruction is now effectively referencing a different attributes array, where the
distinction between the `"class"` attribute vs. the `AttributeMarker.Classes` distinction affects
the behavior: TP's emit causes the runtime to incorrectly match a directive with `selector: '.foo'` to
be instantiated on the `ɵɵtemplate` instruction as if it corresponds with a structural directive!
Instead of changing TP to align with TDB's emit, this commit updates the runtime instead. This uncovered
an inconsistency in selector matching for class names, where there used to be two paths dealing with
class matching:
1. The first check was commented to be a special-case for class matching, implemented in `isCssClassMatching`.
2. The second path was part of the main selector matching algorithm, where `findAttrIndexInNode` was being used
to find the start position in `tNode.attrs` to match the selector's value against.
The second path only considers `AttributeMarker.Classes` values if matching for content projection, OR of the
`TNode` is not an inline template. The special-case in path 1 however does not make that distinction, so it
would consider the `AttributeMarker.Classes` binding as a selector match, incorrectly causing a directive to
match on the `ɵɵtemplate` itself.
The second path was also buggy for class bindings, as the return value of `classIndexOf` was incorrectly
negated: it considered a matching class attribute as non-matching and vice-versa. This bug was not observable
because of another issue, where the class-handling in part 2 was never relevant because of the special-case
in part 1.
This commit separates path 1 entirely from path 2 and removes the buggy class-matching logic in part 2, as
that is entirely handled by path 1 anyway. `isCssClassMatching` is updated to exclude class bindings from
being matched for inline templates.
Fixes#54798
PR Close#54800
Currently if an `(output)` listener fails, it will be handled gracefully
by Angular and reported to the `ErrorHandler`.
For programmatic subscriptions with `OutputEmitterRef`, this is not the case.
Instead, as soon as any subscription is failing, all other subsequent
subscription callbacks are not firing anymore.
This commit intends to make this more consistent by gracefully
reporting errors from `OutputEmitterRef#emit` to `ErrorHandler`,
allowing for listener execution to continue.
PR Close#54821
Ensures that all of the functions intended to be run in initializers are in an injection context. This is a stop-gap until we have a compiler diagnostic for it.
PR Close#54761
Updates the instruction generation for two-way bindings to only emit the `twoWayBindingSet` call when writing to template variables. Since template variables are constants, it's only allowed to write to them when they're signals. Non-signal values are flagged during template type checking.
Fixes#54670.
PR Close#54714
When a view has the `Dirty` flag and is reattached, we should ensure that it is
reached and refreshed during the next change detection run from above.
In addition, when a view is created and attached, we should ensure that it is reached
and refreshed during change detection. This can happen if the view is
created and attached outside a change run or when it is created and
attached after its insertion view was already checked. In both cases, we
should ensure that the view is reached and refreshed during either the
current change detection or the next one (if change detection is not
already running).
We can achieve this by creating all views with the `Dirty` flag set.
However, this does happen to be a breaking change in some scenarios.
The one identified internally was actually depending on change detection
_not_ running immediately because it relied on an input value that was
set using `ngModel`. Because `ngModel` sets its value in a `Promise`, it
is not available until the _next_ change detection cycle. Ensuring
created views run in the current change change detection will result in
different behavior in this case.
fixes#52928fixes#15634
BREAKING CHANGE: Newly created and views marked for check and reattached
during change detection are now guaranteed to be refreshed in that same
change detection cycle. Previously, if they were attached at a location
in the view tree that was already checked, they would either throw
`ExpressionChangedAfterItHasBeenCheckedError` or not be refreshed until
some future round of change detection. In rare circumstances, this
correction can cause issues. We identified one instance that relied on
the previous behavior by reading a value on initialization which was
queued to be updated in a microtask instead of being available in the
current change detection round. The component only read this value during
initialization and did not read it again after the microtask updated it.
PR Close#54735
When the `ApplicationRef` refreshes attached views, it will continue to
do so while there is still one marked for check after the refresh
completes.
BREAKING CHANGE: When Angular runs change detection, it will continue to
refresh any views attached to `ApplicationRef` that are still marked for
check after one round completes. In rare cases, this can result in infinite
loops when certain patterns continue to mark views for check using
`ChangeDetectorRef.detectChanges`. This will be surfaced as a runtime
error with the `NG0103` code.
PR Close#54734
A model signal is technically an output, at runtime and conceptually.
This commit re-uses the shared output ref logic and ensures the
interfaces match.
PR Close#54650
Angular has the `@Attribute` decorator that allows for attributes to be injected from the host node, but we don't have an equivalent for the `inject` function. These changes introduce the new `HostAttributeToken` class that can be used to inject attributes similarly to `@Attribute`. It can be used as follows:
```typescript
import {HostAttributeToken, inject} from '@angular/core';
class MyDir {
someAttr = inject(new HostAttributeToken('some-attr'));
}
```
The new API works similarly to `@Attribute` with one key exception: it will throw a DI error when the attribute doesn't exist, instead of returning `null` like `@Attribute`. We made this change to align its behavior closer to other injection tokens.
PR Close#54604
This commit ensures that any internal render hooks that cause views to
become dirty again first refresh those dirty views before running user
render hooks. This ensures that user render hooks have the most complete
render state possible and stops them from needlessly executing multiple
times. This is important to maintain the goal of the public render
hooks, which is to provide the safest place to place code that depends
on DOM state, especially in ways that may force a browser paint.
PR Close#54224
Fixes that initializer functions weren't being recognized if they are aliased (e.g. `import {model as alias} from '@angular/core';`).
To do this efficiently, I had to introduce the `ImportedSymbolsTracker` which scans the top-level imports of a file and allows them to be checked quickly, without having to go through the type checker. It will be useful in the future when verifying that that initializer APIs aren't used in unexpected places.
I've also introduced tests specifically for the `tryParseInitializerApiMember` function so that we can test it in isolation instead of going through the various functions that call into it.
PR Close#54609
Currently, when a `@defer` block contains standalone components that import NgModules with providers, those providers are not available to components declared within the same NgModule. The problem is that the standalone injector is not created for the host component (that hosts this `@defer` block), since dependencies become defer-loaded, thus no information is available at host component creation time.
This commit updates the logic to collect all providers from all NgModules used as a dependency for standalone components used within a `@defer` block. When an instance of a defer block is created, a new environment injector instance with those providers is created.
Resolves#52876.
PR Close#52881
Fixes that initializer functions weren't being recognized if they are aliased (e.g. `import {model as alias} from '@angular/core';`).
To do this efficiently, I had to introduce the `ImportedSymbolsTracker` which scans the top-level imports of a file and allows them to be checked quickly, without having to go through the type checker. It will be useful in the future when verifying that that initializer APIs aren't used in unexpected places.
I've also introduced tests specifically for the `tryParseInitializerApiMember` function so that we can test it in isolation instead of going through the various functions that call into it.
PR Close#54480
Prior to this fix an incorrect view instance (a dynamically created component
one instead of the root view) was passed to the content query function. Having
incorrect view instance meant that a component instance could not be found.
This is a pre-existing bug, introduction of signal-based queries just surfaced it.
Fixes#54450
PR Close#54457
Assure that the same readonly array corresponding to the children query results
is returned for cases where a query is marked as dirty but there were no actual
changes to the content of the results array (this can happen if a view is added
and removed thus marking queries as dirty but not influencing final results).
Fixes#54376
PR Close#54392
The newly introduced signal queries would error if no match exists, due to an
invalid read within the query internals.
This commit addresses the crash by allowing there to be no matches.
PR Close#54353
In some situations, calling `markForCheck` can result in an infinite
loop in seemingly valid scenarios. When a transplanted view is inserted
before its declaration, it gets refreshed in the retry loop of
`detectChanges`. At this point, the `Dirty` flag has been cleared from
all parents. Calling `markForCheck` marks the insertion tree up to the
root `Dirty`. If the declaration is checked again as a result (i.e.
because it has default change detection) and is reachable because its
parent was marked `Dirty`, this can cause an infinite loop. The
declaration is refreshed again, so the insertion is marked for refresh
(again). We enter an infinite loop if the insertion tree always calls
`markForCheck` for some reason (i.e. `{{createReplayObservable() | async}}`).
While the case above does fall into an infinite loop, it also truly is a
problem in the application. While it's not an infinite synchronous loop,
the declaration and insertion are infinitely dirty and will be refreshed
on every change detection round.
Usually `markForCheck` does not have this problem because the `Dirty`
flag is not cleared until the very end of change detection. However, if
the view did not already have the `Dirty` flag set, it is never cleared
because we never entered view refresh. One solution to this problem
could be to clear the `Dirty` flag even after skipping view refresh but
traversing to children.
PR Close#54329
This commit adds a JIT transform for signal-based queries, so that
queries are working as expected in JIT environments like `ng test` where
decorator metadata is needed as a prerequisite for the component
definition creation.
This is similar to the JIT transforms for signal inputs etc.
PR Close#54257
This commit changes the approach to the reactive node representing query
results: instead of creating a custom node type we can use a computed -
the main change to get there is representing dirty change notification as
a signal (a counter updated every time a query changes its dirty status).
This change is dictated by simplification (we can avoid creation of a custom
signal type) as well as fixes to the multiple issues not covered by the
initial implementation:
- assuring referential stability of results (ex.: the same array instance
returned from child queries until results change);
- per-view results collection to avoid a situation where accessing query
results during view creation would return partial / inconsistent results;
- proper refresh of query results for both live and non-connected consumers.
All the above cases are covered by the additional tests in this commit.
PR Close#54103
This commit adds tests for content queries and fixes the arguments
order in the contentQuerySignal instruction, thus fixing a bug
discovered while adding tests.
PR Close#54103
This commits converts the hand-written tests into their usual,
compiled form. We can perform this change now since the compiler
bits of the queries-as-signal story landed.
PR Close#54103
Updates the acceptance authoring test compiler targets to support
multiple spec files. This will be useful for output, model, inputs
and queries.
PR Close#54253
This test ensures that the `ExpressionChanged...` error does not happen
when signals are updated in a view that is attached to `ApplicationRef`
but was already checked. This was fixed in 432afd1ef4
which actually consequently fixes it for regular `markForCheck` as well.
PR Close#54206
* Renames the `input_signals` directory to `signals` so it can be reused for other tests.
* Reworks the build file to allow multiple test files.
PR Close#54213
Instead of maintaining individual transforms for `input`, `output`,
`model` etc. we are grouping them directly and the first one matching,
will execute.
This reduces needed traversal through AST and also makes it a little
more clean to write new initializer API metadata transforms.
Note: The Angular JIT transform is now also moving from `tooling.ts`
directly into `/transformers` for more local placement of transformer
logic.
PR Close#54200
It was always the intent to have `afterRender` hooks allow updating
state, as long as those state updates specifically mark views for
(re)check. This commit delivers that behavior. Developers can now use
`afterRender` hooks to perform further updates within the same change
detection cycle rather than needing to defer this work to another round
(i.e. `queueMicrotask(() => <<updateState>>)`). This is an important
change to support migrating from the `queueMicrotask`-style deferred
updates, which are not entirely compatible with zoneless or event `NgZone` run
coalescing.
When using a microtask to update state after a render, it
doesn't work with coalescing because the render may not have happened
yet (coalescing and zoneless use `requestAnimationFrame` while the
default for `NgZone` is effectively a microtask-based change detection
scheduler). Second, when using a `microtask` _during_ change detection to defer
updates to the next cycle, this can cause updates to be split across
multiple frames with run coalescing and with zoneless (again, because of
`requestAnimationFrame`/`macrotask` change detection scheduling).
PR Close#54074
Andrew Kushnir