We roughly attempt to match TemplateDefinitionBuilder's pipe creation order, by placing pipe creation instructions after their target elements. However, we cannot fully emulate the "inside-out" ordering TemplateDefinitionBuilder uses when multiple pipes apply to one element, because TemplateDefinitionBuilder creates the pipes as expressions are visited, from the leaves up. Our order is perfectly adequate though.
We also add a non-compatibility-mode ordering, which just appends them to the end of the create block. This is better because it allows for more chaining opportunities.
PR Close#52289
Singleton property interpolation instructions consume only one variable, but are still emitted as an interpolation instruction (they cannot be collapsed because `propertyInterpolate` implicitly stringifies its argument.)
PR Close#52289
We were incorrectly emiting a extracted constant pool index for the final argument of the projection instruction. It actually takes an array literal.
(N.B.: This means we re-create the array every time! We should probably modify the runtime to use a const index for this.)
Additionally, we alter the projection op to not extend the element op base type.
PR Close#52289
The correct order of attributes and properties is:
1. Interpolated properties
2. Interpolated attributes
3. Non-interpolated properties
4. Non-interpolated attributes
This includes an additional nuance: singleton attribute interpolations, such as `[attr.foo]="{{bar}}"`, will be "collaped" into a simple `attribute` instruction. However, this is *not* the case for singleton property interpolations! The ordering phase must take this nuance into account to match the TemplateDefinitionBuilder order.
After the project lands, it might be nice to also collapse singleton property interpolations.
PR Close#52289
Previously, we ran the ordering phase near the end of the compilation. However, this meant that phases like slot assignment and variable offset assignment would happen first, and then the nice, monotonically-increasing orders would be scrambled by the reordering.
It's much more intelligible to order first, and then perform these assignments. However, to make this happen, some modifications to the ordering phase are required. In particular, we can no longer rely on `advance` instructions to break up orderable groups.
PR Close#52289
Many instructions consume variable slots, which are used to persist data between update runs. For top-level instructions, the offset into the variable data array is implicitly advanced, because those instructions always run.
However, instructions in non-top-level expressions cannot be assumed to run every time, because they might be conditionally executed. Therefore, they cannot implicitly advance the offset into the variable data, and must be given an explicitly assigned variable offset.
TemplateDefinitionBuilder assigned offsets top-to-bottom for all instructions *except* pure functions. Pure functions would be assigned offsets lazily, on a second pass.
Template Pipeline can now imitate this behavior, when in compatibility mode: pure functions are assigned offsets on a second pass.
This also makes the "variadic var offsets" phase unnecessary -- the new approach is more general and correct.
PR Close#52289
Previously, inside an event listener, template pipeline would always save the context from restoring a view, e.g.
```
const restored_ctx = r0.ɵɵrestoreView(s);
```
This is usually correct! However, consider the case of a listener in the template's root view. The appropriate context will already be available via closure capture, and we can just use it (as `ctx`).
Now, the context resolution phase understands that we don't need to use the restored view's saved context if we would have access to it by closure.
Note: we also create a new golden, because the const array is in a harmlessly different order.
PR Close#52289
Previously, the template pipeline did not handle "empty" reads gracefully: it would emit syntactically invalid reads of empty properties. Now we read `$implicit`.
This allows us to enable a test that relies on `$implicit`. However, we also have to create another golden, because our variable inlining is more aggressive.
PR Close#52289
We currently allow elements to be collapsed around pipe creation instructions. TemplateDefinitionBuilder disallows this, but only sometimes. Collapsing in this case is actually less generated code, and it's OK to allow it.
PR Close#52289
Previously, the cross entry-point dependency was created to share the `setDomTypes` function. This however, causes extra transformations "linking" during the application build since other Angular code in `@angular/platform-server` is pulled in.
With this commit we remove the cross dependency and thus remove the need for extra transformations in the server polyfill bundle with the result of having a slightly faster build.
See: https://github.com/angular/angular-cli/pull/26113
PR Close#52342
This commit updates the logic to ignore `after` and `minimum` conditions when `DeferBlockFixture.render` method is used in tests.
Resolves#52313.
PR Close#52314
This commit updates the code to report errors via `ErrorHandler` instance.
For dependency loading problems, errors are reported only when `@error` block is not provided.
PR Close#52320
This updates offset to handle pre and post offset properly for nested situations, rather than relying on solely nestCount. This should properly apply offset calculations at the right time to handle any nested situation.
PR Close#52332
The template pipeline can now generate track functions, and extract them into the constant pool (or optimize them if needed). Additionally, context variables such as `$index` can be used inside track functions and for loop bodies.
PR Close#52001
Add support for `repeaterCreate` and `repeater` instructions. Correctly count decls and vars, and support primary and empty blocks.
`track` functions are not yet extracted.
PR Close#52001
View compilations previously had context variables, which were variables available in the view that would result in a property read on the context object.
We now also support the notion of aliases. An alias is a variable available in the view compilation, which might be derived from a context variable, which it may reference by name. It is always inlined at all usage sites, and therefore is not allowed to depend on the current context.
Under the hood, aliases rely on the new `AlwaysInline` mode.
Co-authored-by: Alex Rickabaugh <alxhub@users.noreply.github.com>
PR Close#52001
The template pipeline now supports lexical variables that are always inlined into their call sites, even if multiple call sites exist.
An `AlwaysInline` variable may not rely on the current context, because it will potentially be inlined at several different locations.
Co-authored-by: Alex Rickabaugh <alxhub@users.noreply.github.com>
PR Close#52001
Prior to this commit relative HTTP requests were not being resolved to absolute even thought the behaviour is documented in https://angular.io/guide/universal#using-absolute-urls-for-http-data-requests-on-the-server.
This caused relative HTTP requests to fail when done on the server because of missing request context. This change is also required to eventually support HTTP requests handled during prerendering (SSG).
Closes#51626
PR Close#52326
Previously, autocompletions were not available in two main cases. We correct them.
1. Autocompletions immediately after `@` were usually not working, for example `foo @|`. We fix this by causing the lexer to not consider the `@` part of the text node.
2. Autocompletions such as `@\nfoo`, where a newline follows a bare `@`, were not working because the language service visitor considered us inside the subsequent text node. We fix this by adding a block name span for the block keyword, and special-case whether we are completing inside the name span. If we are, we don't continue to the following text node.
PR Close#52198
This commit adds the logic to cleanup all triggers once defer block is triggered.
When a trigger is created, its cleanup function is stored alongside other defer block info. Prefetch and regular triggers are store in different slots, since we need to invoke them at different time.
PR Close#52291
A few performance improvements and code cleanups in the after render hooks:
1. We were wrapping each `destroy` callback in another callback, because it was typed as `|undefined`. This is unnecessary, because the callback is guaranteed to exist. These changes pass the `destroy` function around directly and avoid the additional callback.
2. In server platforms we were recreating a noop `AfterRenderRef` on each invocation. We can save some memory by returning the same one.
3. Reworks the `AfterRenderCallback` so that it injects `NgZone` and `ErrorHandler` itself, instead of expecting them to be passed in. This reduces the amount of repetition in the code.
PR Close#52292
In #52110 the compiler was changed to produce `if` statements when type checking `@switch` in order to avoid a bug in the TypeScript compiler. In order to avoid duplicate diagnostics, the main `@switch` expression was ignored in each of the `@case` comparisons. This appears to have caused a regression where comparing incompatible types wasn't being reported anymore.
These changes resolve the issue by wrapping the expression in parentheses which allows the compiler to report comparison diagnostics while ignoring diagnostics in the expression itself.
Fixes#52315.
PR Close#52322
The current way of computing a route's params and data recomputes
inherited data from the inheritance root every time. When the
inheritance strategy is "emptyOnly", this isn't necessarily the root of
the tree, but some point along the way (it stops once it reaches an
ancestor route with a component).
Instead, this commit updates parameter inheritance to only inherit data
directly from the parent route (again, instead of recomputing all
inherited data back to the inheritance root). The only requirement for
making this work is that the parent route data has already calculated
and updated its own inherited data. This was really already a
requirement -- parents need to be processed before children.
In addition, the update to the inheritance algorithm in this commit
requires more of an understanding that a resolver running higher up in
the tree has to propagate inherited data downwards. The previous
algorithm hid this knowledge because resolvers would recompute inherited
data from the root when run. However, routes that did not have resolvers
rerun or never had resolvers at all would not get the updated resolved data.
fixes#51934
PR Close#52167
Now the method `getConstructorDependencies` no longer needs to do any post analysis, and can rely on the reflection host's result to generate ctor params. This will automatically include invalid factories which fix the issue.
PR Close#52215
Currently the reflection host's `getConstructorParameters` method is not aware of the compilation mode, and it generates result mainly assuming the compilation mode is full and we have access to global type info. As a result, its result is not very suitable for local compilation usage, particularly for deciding if a symbol is imported as type or not. This change plumbs a flag `isLocalCompilation` into reflection host to make it aware of the compilation mode.
Also changes made to the logic in the method `getConstructorParameters` so that in local compilation mode:
- returns NO_VALUE_DECLARATION type value ref only if the type is a type parameter
- returns local type value ref for any imported symbol, unless the import is type only in which case returns TYPE_ONLY_IMPORT type value ref
PR Close#52215
Removed the signals property definition from the Component interface since it already exists in the Directive interface and Component inherits from Directive
PR Close#52039
This commit refactors a couple places to improve performance:
* avoid checking parent tree if a current node has "skip hydration" flag
* avoid calling `isInSkipHydrationBlock` if there is no hydration info present
PR Close#52221
A lot of our tests are wrapped in `{}` which serves no purpose, aside from increasing the nesting level and, in some cases, causing confusion. The braces appear to be a leftover from a time when all tests were wrapped in a `function main() {}`. The function declaration was removed in #21053, but the braces remained, presumably because it was easier to search&replace for `function main()`, but not to remove the braces at the same time.
PR Close#52239
The commit adds messaging to the control flow template diagnostic to direct developers to the new
built-in control flow syntax in Angular.
PR Close#52268
This commit updates the message that we output in the console (once hydration is completed) to drop the reference to the developer preview.
PR Close#52197
This commit removes the `@developerPreview` annotation from the `provideClientHydration` function and related symbols, promoting them to stable.
PR Close#52197
Dylan Hunn