Allow `validateStandardSchema()` to consume a computed schema so
validation rules stay in sync when the schema changes over time.
This supports schemas stored in computed signals (e.g. zod schemas that
depend on input signals) and ensures the effective schema updates after
initialization instead of being captured once.
Fixes#66867
(cherry picked from commit 24c0c5a180)
Don't touch hidden, disabled, or readonly fields on submit, since they
don't contribute to form validity. This also prevents errors from
appearing immediately if they're later made interactive.
Fix#66344
(cherry picked from commit e682e53113)
Ensure `submit()` behaves as expected while a form is pending.
- Submission is not blocked by pending validation.
- Submission errors prevent pending validation errors from appearing
after they resolve on the same field.
- Submission errors don't prevent pending validation errors from
appearing after they resolve on subfields.
(cherry picked from commit 01bfb83fc9)
Previously we were unconditionally setting the control value back into
the value, regardless of if it had actually been changed. This PR
changes the logic to flush the pending sync on touch if there is one, or
just skip it if there isn't.
(cherry picked from commit e7b2dde6d1)
This PR adds the ability to manually register a binding with the
`FormField` directive. This is useful for a lower-level implementation
that takes the field tree as an `input()` rather than relying on the
automatic binding from `FormUiControl`.
(cherry picked from commit 5974cd0afc)
Prior to this change, binding to radio value was sensitive to the order in which `value` & `formField` where binding in the template.
The compiler change makes that order non-important.
fixes#66402
(cherry picked from commit 65fa5b5439)
Add comprehensive test cases to validate behavior when multiple
pattern validators are applied to the same field.
These tests clarify that multiple patterns operate with AND logic,
where each pattern is validated independently and produces its own
error when it doesn't match.
(cherry picked from commit 7fd076bdd3)
This completes the rename started in #66136. `[field]` is too generic of
a selector for the forms system to own, and likely to cause naming
collisions with existing components. Therefore it is being renamed to
`[formField]`
(cherry picked from commit 5671f2cc07)
Remove the `customError` function and `CustomValidationError` type.
These were made obsolete by support for returning plain object literals
as custom errors.
This also catches few `field` properties that were missed in the
renaming to `fieldTree`.
Removes the abort event listener once the debounce timeout completes.
This avoids lingering listeners, prevents potential memory leaks, and ensures
the abort logic runs at most once.
This will replace the `[field]` directive, since `[field]` is a very
generic name for signal forms to commandeer
refactor(forms): hook up `formField` directive in compiler
Hooks up the `formField` direcive to get the same treatment as the
`field` directive in the compiler.
apply updated formatting
The framework will now bind all field state properties to their
corresponding native properties (if any) on interop form controls (those
using `ControlValueAccessor`), excluding those handled explicitly by
`ControlValueAccessor` such as `disabled`.
Since the `Field` directive manages binding `FieldState` properties to
the underlying form control automatically, the type checker prohibits
explicit bindings to the same properties to avoid conflicts. This proved
problematic in cases where developers wanted to bind these properties to
the inputs of other directives on form controls. Now the framework will
bind the field state properties to all matching directive inputs on
native controls.
Fix#65617
* Allow custom controls to make `pending` a required input
* Refactor test for `pending` input to be consistent with other control
properties
* Test that `pending` inputs are reset when the field binding changes
* Refactor test for `disabledReasons` input to be consistent with other control
properties
* Test that `disabledReasons` inputs are reset when the field binding changes
* Allow custom controls to make `dirty` a required input
* Refactor test for `dirty` input to be consistent with other control
properties
* Test that `dirty` inputs are reset when the field binding changes
* Refactor test for `invalid` input to be consistent with other control
properties
* Test that `invalid` inputs are reset when the field binding changes
* Allow custom controls to make `hidden` a required input
* Refactor test for `hidden` input to be consistent with other control
properties
* Test that `hidden` inputs are reset when the field binding changes
* Recognize directives with non signal-based models as valid custom controls
* Relax type checker to allow non signal-based models
The `FormValueControl` and `FormCheckboxControl` interfaces still
require a `model()`-input, however, a custom control need not implement
either interface to be bound by the `Field` directive.
All of the following examples can be used to define a custom control:
```ts
// Preferred: model()
class MyFormControl implements FormValueControl<string> {
readonly value: model.required<string>();
}
// Supported: input() + output()
class MyFormControl {
readonly value: input.required<string>();
readonly valueChange: output<string>();
}
// Supported: @Input() + @Output()
class MyFormControl {
@Input({required: true}) value!: string;
@Output() valueChange: new EventEmitter<string>();
}
```
The latter two may still choose to implement `FormUiControl` for other
properties, but again it is not required.
Fix#65478
Updates signal forms to pass the full `Field` directive to the class
configuration functions, rather than just the state. This allows
developers to take the element as well as the state into consideration
when deciding classes to apply.
Closes#65762
BREAKING CHANGE: The shape of `SignalFormsConfig.classes` has changed
Previously each function in the `classes` map took a `FieldState`. Now
it takes a `Field` directive.
For example if you previously had:
```
provideSignalFormsConfig({
classes: {
'my-valid': (state) => state.valid()
}
})
```
You would need to update to:
```
provideSignalFormsConfig({
classes: {
'my-valid': ({state}) => state().valid()
}
})
```
This PR makes a number of changes to the metadata API to address design
flaws in the previous API. Some of the changes include:
- Replaces the previous `MetadataKey` and `AggregateMetadataKey` with a
single unified `MetadataKey` that is used for all metadata.
- The new `MetadataKey` is only defined for fields that explicitly set
it in their schema logic
- All metadata now has reducer / aggregate behavior
- The new `MetadataKey` has an option to create a managed key which
wraps the result of its computed aggregate into some other structure
such as a `Resource` or `linkedSignal`
- There are now two APIs to create metadata keys
- `createMetadataKey` for pure computed metadata
- `createManagedMetadataKey` for metadata that manages its computation
internally
Previously, navigating a `FieldTree` in signal forms involved reactive reads
of the value of the parent field(s), both directly and via `.childrenMap()`.
This meant that on _any_ change to the value of a field, reactive
notifications would trigger updates of computeds, reruns of effects, etc.
So for example, this effect would run on every change to the form:
```ts
const f = form(signal({data: 'abc', unrelated: 0}));
effect(() => {
// accessing f.data incurs a dependency on f().value() which changes
// on every change in the whole form
console.log(f.data().value());
});
```
This is deeply counterintuitive and troublesome when attempting to write
effect logic, and also results in `computed`s unnecessarily updating.
This change introduces the concept of a "reader" computed, which memoizes
the access of a field at a given key via the reactive graph. With this, the
same `f.data` access above now depends on the `data` reader in `f` only,
which is effectively a constant computed. As a result, the effect only
reruns on changes to `data`'s value, as intended.
PR Close#65802
This is necessary to exclude a race condition where the MutationObserver initialized by the instruction fired before the inputs are binded.
fixes#65678
Adds a DI configuration option for signal forms that allows the
developer to specify CSS classes that should be automatically added
by the `Field` directive based on the field's status.
Support binding `[field]` to directives that implement
`FormValueControl` or `FormCheckboxControl`.
The `[field]` binds to whichever directive (or component) matches first in the
event there are multiple implementations. We are considering whether to make
this an error state, which could be reported during type checking.
Closes#63910, Closes#64992
An early piece of feedback received regarding custom controls hosted on
native inputs was that they required a lot of boilerplate to bind
`FieldState` properties. Each property required an input to accept the
property, and a host binding to forward it to the native control.
* Apply any debounce rules to updates from interop controls (if configured).
* Add tests to ensure debouncing works for all control types (native, custom,
and interop).
If we're calling `min` on a path that's guaranteed to be `number` we
don't want to make the users validator function handle the `null` or
`string` cases.
This uncovered an issue in the `SchemaTreePath` type which needed to be
fixed by preventing the model type from being distributed over.
PR Close#65212
Relaxes the constraints on which paths can be used with the `min` &
`max` validation rules, since people may want to validate a
potentially-null number, or a numeric value represented as a string
PR Close#65212
Matthieu Riegler