Add an internal API to enable and use i18n hydration for testing and development. This helps ensure that we don't accidentally break the current behavior until we are completely ready to roll out i18n support.
PR Close#54784
This commit updates HTML sanitization logic to avoid infinite loops in case clobbered elements contain fields like `nextSibling` or `parentNode`. Those fields are used for DOM traversal and this update makes sure that those calls return valid results.
Also this commit fixes an issue when clobbering `nodeName` causes JS exceptions.
PR Close#54425
An i18n message effectively acts as a dynamic template: two elements with contiguous instruction indices won't necessarily be contiguous in the DOM.
For that reason, we need to maintain a mapping from instruction index to a physical DOM node in order to hydrate views with i18n, pointing to where hydration for that view should begin.
PR Close#54750
In order to serialize and hydrate i18n blocks, we need to be able to walk an AST for the translated message. This AST is generated during normal parsing of the message.
PR Close#54724
In zone-full applications, this is already true because effects are
scheduled inside a microtask and tracked by ZoneJS. When not using
zones, this should stay consistent on principle and for testability
reasons. A general pattern with zoneless testing will be to update state
and `await` some promise (i.e. `fixture.whenStable`, which will be
linked to `ApplicationRef.isStable`).
PR Close#53835
One downside of implicit dependency tracking in `effect()`s is that it's easy
to for downstream code to end up running inside the effect context by accident.
For example, if an effect raises an event (e.g. by `next()`ing a `Subject`), the
subscribers to that `Observable` will run inside the effect's reactive context,
and any signals read within the subscriber will end up as dependencies of the
effect. This is why the `untracked` function is useful, to run certain
operations without incidental signal reads ending up tracked.
However, knowing when this is necessary is non-trivial. For example, injecting
a dependency might cause it to be instantiated, which would run the constructor
in the effect context unless the injection operation is untracked.
Therefore, Angular will automatically drop the reactive context within a number
of framework APIs. This commit addresses these use cases:
* creating and destroying views
* creating and destroying DI injectors
* injecting dependencies
* emitting outputs
Fixes#54548
There are likely other APIs which would benefit from this approach, but this
is a start.
PR Close#54614
This commit ensures that any internal render hooks that cause views to
become dirty again first refresh those dirty views before running user
render hooks. This ensures that user render hooks have the most complete
render state possible and stops them from needlessly executing multiple
times. This is important to maintain the goal of the public render
hooks, which is to provide the safest place to place code that depends
on DOM state, especially in ways that may force a browser paint.
PR Close#54224
This adds a helper function to defer application state updates to the
first possible "safe" moment. If application-wide change detection
(ApplicationRef.tick) is currently executing when this function is used,
the callback will execute as soon as all views attached to the
`ApplicationRef` have been refreshed. Refreshing the application views
will happen again before `checkNoChanges` executes.
When a change detection is _not_ running, this state update will execute
in the microtask queue.
This function is necessary as a replacement for current
`Promise.resolve().then(() => stateUpdate())` to be zoneless compatible
while ensuring those state updates are synchronized to the DOM before
the browser repaint. Without this, updates done in `Promise.resolve(...)` would
queue another round of change detection in zoneless applications, and
this change detection could happen in the next browser frame, and cause
noticeable flicker for the user.
Additionally, this function provides a way to perform state updates that
will run on the server as well as in the browser.
Last, current applications using `ngZone: 'noop'` may not be
calling `ApplicationRef.tick` at all so this function provides a
mechanism to ensure the state update still happens by racing
a microtask with `afterNextRender` (which might never execute).
PR Close#54224
Currently, when a `@defer` block contains standalone components that import NgModules with providers, those providers are not available to components declared within the same NgModule. The problem is that the standalone injector is not created for the host component (that hosts this `@defer` block), since dependencies become defer-loaded, thus no information is available at host component creation time.
This commit updates the logic to collect all providers from all NgModules used as a dependency for standalone components used within a `@defer` block. When an instance of a defer block is created, a new environment injector instance with those providers is created.
Resolves#52876.
PR Close#52881
Prior to this fix an incorrect view instance (a dynamically created component
one instead of the root view) was passed to the content query function. Having
incorrect view instance meant that a component instance could not be found.
This is a pre-existing bug, introduction of signal-based queries just surfaced it.
Fixes#54450
PR Close#54457
Currently we have two fake copies of `@angular/core` in the compiler tests which can be out of sync and cause inconsistent tests. These changes reuse a single copy instead.
PR Close#54344
PR Close#54398
Currently all triggers are set up to show the placeholder block on the server, except for `on immediate` which is basically a noop. These changes update `on immediate` to match the rest of the triggers.
Fixes#54385.
PR Close#54394
Assure that the same readonly array corresponding to the children query results
is returned for cases where a query is marked as dirty but there were no actual
changes to the content of the results array (this can happen if a view is added
and removed thus marking queries as dirty but not influencing final results).
Fixes#54376
PR Close#54392
The newly introduced signal queries would error if no match exists, due to an
invalid read within the query internals.
This commit addresses the crash by allowing there to be no matches.
PR Close#54353
In some situations, calling `markForCheck` can result in an infinite
loop in seemingly valid scenarios. When a transplanted view is inserted
before its declaration, it gets refreshed in the retry loop of
`detectChanges`. At this point, the `Dirty` flag has been cleared from
all parents. Calling `markForCheck` marks the insertion tree up to the
root `Dirty`. If the declaration is checked again as a result (i.e.
because it has default change detection) and is reachable because its
parent was marked `Dirty`, this can cause an infinite loop. The
declaration is refreshed again, so the insertion is marked for refresh
(again). We enter an infinite loop if the insertion tree always calls
`markForCheck` for some reason (i.e. `{{createReplayObservable() | async}}`).
While the case above does fall into an infinite loop, it also truly is a
problem in the application. While it's not an infinite synchronous loop,
the declaration and insertion are infinitely dirty and will be refreshed
on every change detection round.
Usually `markForCheck` does not have this problem because the `Dirty`
flag is not cleared until the very end of change detection. However, if
the view did not already have the `Dirty` flag set, it is never cleared
because we never entered view refresh. One solution to this problem
could be to clear the `Dirty` flag even after skipping view refresh but
traversing to children.
PR Close#54329
The `subscribe` methods on `ModelSignal` and `OutputEmitter` were marked as `@internal` which will break when the TCB needs to reference them. These changes make them `@deprecated` temporarily so we can address the properly later.
PR Close#54342
Fixes that `ɵunwrapWritableSignal` inferring getter functions as not matching the interface of `WritableSignal` instead of preserving them.
PR Close#54252
In a previous commit the TCB was changed to cast the assignment to an input in order to widen its type to allow `WritableSignal`. This ended up breaking existing inputs whose setter has a wider type than its getter. These changes switch to unwrapping the value on the binding side.
PR Close#54252
Reworks the TCB for two-way bindings to make them simpler and to avoid regressions for two-way bindings to generic inputs. The new TCB looks as follows:
```
var _t1: Dir;
var _t2 = _t1.input;
(_t1 as typeof _t2 | WritableSignal<typeof _t2>) = expression;
```
PR Close#54252
Adds support for model inputs in the framework. `model()` returns a writable signal that implicitly defines a input/output pair that can be used either in two-way bindings to keep two values in sync or by binding individually to the input and output. When the value of the `model` changes, it will emit an event with the current value.
Furthermore, these changes expand two-way bindings to accept `WritableSignal`. This will make it easier to transition existing code to signals in a backwards-compatible way.
Example:
```ts
@Directive({
selector: 'counter',
standalone: true,
host: {
'(click)': 'increment()',
}
})
export class Counter {
value = model(0);
increment(): void {
this.value.update(current => current + 1);
}
}
@Component({
template: `<counter [(value)]="count"/> The current count is: {{count()}}`,
})
class App {
count = signal(0);
}
```
PR Close#54252
This commit improves IDE completion of the `read` option for
signal-based queries.
Currently, TS only matches the first overload when starting out with
defining a query. TS doesn't build up the combination of possible
options from the second overload- so in practice users will only see
IDE completions for the `descendants` option.
This is not a problem for view queries as the only option is `read`, so
TS will always match the overload with the `read` option.
```
class X {
query = contentChild('', {^^ <--
here we should completion for `read` an `descendants`
}
```
PR Close#54280
The compileNgModuleFactory dont need to be in the application_ref file (in fact
the whole logic has little to do with ApplicationRef and it is not even called
from the application_ref). Performing this move to avoid circular dependencies
when the new query as signals authoring functions are exported.
PR Close#54103
This commit changes the approach to the reactive node representing query
results: instead of creating a custom node type we can use a computed -
the main change to get there is representing dirty change notification as
a signal (a counter updated every time a query changes its dirty status).
This change is dictated by simplification (we can avoid creation of a custom
signal type) as well as fixes to the multiple issues not covered by the
initial implementation:
- assuring referential stability of results (ex.: the same array instance
returned from child queries until results change);
- per-view results collection to avoid a situation where accessing query
results during view creation would return partial / inconsistent results;
- proper refresh of query results for both live and non-connected consumers.
All the above cases are covered by the additional tests in this commit.
PR Close#54103
This commit adds tests for content queries and fixes the arguments
order in the contentQuerySignal instruction, thus fixing a bug
discovered while adding tests.
PR Close#54103
This commit updates the logic of defer blocks to create an internal pending task to indicate that an application is not yet stable. This change would be helpful for zoneless applications.
PR Close#54239
The `listener` instruction currently always assumes RxJS subscribables,
and verifies this via `isSubscribable`. The type narrowing is not
ignored and the type remains `any` given the `ngDevMode` check.
This commit improves type safety, and actually switches to a dedicated
interface for "output subscribable" values. This is needed because
`Subscribable` from `RxJS` is typed to expect an observer in object
literal form- which is not correct and doesn't apply to `EventEmitter`
and matches the form of `.subscribe` we are using in the `listener`
instruction.
PR Close#54217
This commit introduces the `output()` function and corresponding
runtime code.
In practice, `output()` will defer to `EventEmitter` as outlined in the
RFC, but we are considering limiting the type to a minimal version that
is not coupled with RxJS, less complex, and also has better type safety
around emitting of values.
E.g. currently `EventEmitter.emit` can always be called without
any value, even though the output may be typed to always pass around
values of type `T`. This could cause subtle and confusing bugs.
PR Close#54217
Gerald Monaco