Previously, redirects had to be configured in both the Firebase config
(`firebase.json`) and the ServiceWorker config (`ngsw-config.json`).
This made it challenging to correctly configure redirects, since one had
to understand the different formats of the two configs, and was also
prone to getting out-of-sync configs.
This commit simplifies the process of adding redirects by removing the
need to update the ServiceWorker config (`ngsw-config.json`) and keep it
in sync with the Firebase config (`firebase.json`). Instead the
ServiceWorker `navigationUrls` are automatically generated from the list
of redirects in the Firebase config.
NOTE:
Currently, the automatic generation only supports the limited set of
patterns that are necessary to translate the existing redirects. It can
be made more sophisticated in the future, should the need arise.
PR Close#42452
This commit aligns the angular.io config files more closely to how a
newly generated CLI v12 app would look like. This helps validate the
setup and makes it easier to apply new chages in the future (by
preventing the angular.io layout from deviating too much from the
default new app layout).
PR Close#42259
Changes the engines rule in aio to accept any node version greater than
or equal to v14. This allows node v15 to work with aio.
addresses #42076
PR Close#42367
Merge conflicts in yarn.lock and aio/yarn.lock were resolved manually by
@alxhub (by running `yarn` to update the lockfiles instead of guessing at
conflict resolution).
PR Close#42035
When aio yarn docs-only command runs on v12.14.1 it fails details given on issue #41979. Upgrading node version to v12.17.0 solves this but creates a new warning (node:467072) ExperimentalWarning: The ESM module loader is experimental.
This warning gets removed in v12.20.0. Upgrading node version to 12.20.0
PR Close#42009
[`watchr` v4.0.0][1] changes the way watched directories are
scanned/watched, thus causing a great increase in the consumed CPU and
RAM. This affects the performance of the `docs-watch` and transitively
`serve-and-sync` npm scripts.
(For reference, on my local machine it goes from 0% CPU and 275MB RAM
with v3.0.1 to 50% CPU and 10GB RAM with v4+.)
This commit pins `watchr` to version 3.0.1 (which is the latest version
that does not cause performance issues) and disabled automatic updates
via Renovate.
[1]: https://github.com/bevry/watchr/releases/tag/v4.0.0
PR Close#41903
With this change we add the `assert` polyfill which is required because `timezone-mock` is a Node.JS library which is being used in Browser.
PR Close#41764
This is a pre-update to Angular 12 cleanup.
This is not needed for version 12, since applications cannot be built using View Engine.
PR Close#41638
(cherry picked from commit 70425539f7)
PR Close#41662
Upgrade local development environment for the angular repo to use node 14
dropping node 10 from supported for development within the angular repo.
PR Close#41544
This is a temporary workaround until the CLI version containing a fix for the regression caused by deacc74 is available on NPM.
Without this change CLI builds will fail with;
```
angularCompiler.getNextProgram is not a function
```
PR Close#41434
With this change we update several dependencies to avoid Renovate creating a lot of PRs during onboarding. We also remove yarn workspaces as after further analysis these are not needed.
Certain dependencies such as `@octokit/rest`, `remark` and `@babel/*` have not been updated as they require a decent amount of work to update, and it's best to leave them for a seperate PR.
PR Close#41434
Rather than relying on a preinstall script, set `engine-strict` to `true` in a
project `.npmrc` file, relying on the `engines` having `npm` set to note that
yarn should be used instead.
---
Output from `npm install` changes from:
```
$ npm install
> angular-srcs@12.0.0-next.7 preinstall /usr/local/account/js/angular
> node tools/yarn/check-yarn.js
/usr/local/account/js/angular/tools/yarn/check-yarn.js:12
throw new Error(
^
Error: Please use Yarn instead of NPM to install dependencies. See: https://yarnpkg.com/lang/en/docs/install/
at Object.<anonymous> (/usr/local/account/js/angular/tools/yarn/check-yarn.js:12:9)
at Module._compile (internal/modules/cjs/loader.js:778:30)
at Object.Module._extensions..js (internal/modules/cjs/loader.js:789:10)
at Module.load (internal/modules/cjs/loader.js:653:32)
at tryModuleLoad (internal/modules/cjs/loader.js:593:12)
at Function.Module._load (internal/modules/cjs/loader.js:585:3)
at Function.Module.runMain (internal/modules/cjs/loader.js:831:12)
at startup (internal/bootstrap/node.js:283:19)
at bootstrapNodeJSCore (internal/bootstrap/node.js:623:3)
npm ERR! code ELIFECYCLE
npm ERR! errno 1
npm ERR! angular-srcs@12.0.0-next.7 preinstall: `node tools/yarn/check-yarn.js`
npm ERR! Exit status 1
npm ERR!
npm ERR! Failed at the angular-srcs@12.0.0-next.7 preinstall script.
npm ERR! This is probably not a problem with npm. There is likely additional logging output above.
npm ERR! A complete log of this run can be found in:
npm ERR! /usr/local/account/.npm/_logs/2021-04-06T22_54_02_292Z-debug.log
```
to
```
$ npm install
npm ERR! code ENOTSUP
npm ERR! notsup Unsupported engine for angular-srcs@12.0.0-next.7: wanted: {"node":">=10.19.0 <13.0.0","yarn":">=1.22.4 <2","npm":"Plesae use yarn instead of NPM to install dependencies"} (current: {"node":"10.20.1","npm":"6.14.4"})
npm ERR! notsup Not compatible with your version of node/npm: angular-srcs@12.0.0-next.7
npm ERR! notsup Not compatible with your version of node/npm: angular-srcs@12.0.0-next.7
npm ERR! notsup Required: {"node":">=10.19.0 <13.0.0","yarn":">=1.22.4 <2","npm":"Plesae use yarn instead of NPM to install dependencies"}
npm ERR! notsup Actual: {"npm":"6.14.4","node":"10.20.1"}
npm ERR! A complete log of this run can be found in:
npm ERR! /usr/local/account/.npm/_logs/2021-04-06T22_53_23_912Z-debug.log
```
PR Close#41477
This commit enables linting for the scripts in
`aio/tools/ng-packages-installer/`. It also makes the necessary changes
to the files to make linting pass.
PR Close#41429
This commit updates the `eslint` and `eslint-plugin-jasmine` packages to
latest versions to take advantage of latest fixes and improvements.
PR Close#41429
The AIO search index is built in a WebWorker on the browser from a set
of page information that is downloaded as a JSON file (`search-data.json`).
We want to keep this file as small as possible while providing enough
data to generate a useful index to query against.
Previously, we only included one copy of each (non-ignored) term from each
doc but this prevents more subtle ranking of query results, since the number
of occurences of a term in a doc is lost.
This commit changes the generated file in the following ways:
- All non-ignored terms are now included in the order in which they appear
in the doc.
- The terms are indexed into a dictonary to avoid the text of the term being
repeated in every doc that contains the term.
- Each term is pre-"stemmed" using the same Porter Stemming algorith that the
Lunr search engine uses.
The web-worker has been updated to decode the new format of the file.
Now that all terms are included, it may enable some level of phrase based
matching in the future.
The size of the generated file is considerably larger than previously, but
on production HTTP servers the data is sent compressed, which reduces the
size dramatically.
PR Close#41368
Before #41162, angular.io was broken on IE 11 due to missing a polyfill
for an API (`Reflect.construct()`) needed by the Custom Elements ES5
shim. #41162 tried to fix this by loading the necessary polyfill
(`es.reflect.construct.js`) on browsers that do not support ES2015
modules (including IE 11).
It turns out that the fix in #41162 was itself broken, because the
`es.reflect.consruct.js` script (included directly in the page via a
`<script>` tag) was in CommonJS format (which cannot run in the browser
as is). By chance, this still allowed browsers that supported neither
Custom Elements nor ES2015 modules (such as IE 11) to work correctly as
a side-effect of loading the `@webcomponents/custom-elements` polyfill
after the Custom Elements ES5 shim (`native-shim.js`). However, on the
few browsers that natively support Custom Elements but not ES2015
modules, angular.io would still be broken.
This commit correctly fixes angular.io on all browsers by properly
bundling the polyfills and transpiling to ES5.
Implementation-wise, we use [esbuild][1] for bundling the polyfills (and
converting from CommonJS to a browser-compatible, IIFE-based format) and
[swc][2] for downleveling the code to ES5 (since `esbuild` only supports
ES2015+).
[1]: https://esbuild.github.io/
[2]: https://swc.rs/
PR Close#41183
George Kalpakas