It is important to use the correct major version of the Angular CLI when
following the examples in the tutorials. This commit provides a custom
element that renders an appropriate dist-tag in the setup step of
the tutorial when the docs are not in "stable" mode.
Fixes#39821
PR Close#41991
PR Close#42041
Due to the way PRs are merged to both master and patch branches, the size
tracking goldens for `11.2.x` have gotten slightly out of sync, causing
failures at HEAD.
This commit corrects the goldens (an increase of approximately 500 bytes).
PR Close#42069
When an Ivy NgModule is imported into a View Engine build, it doesn't have
metadata.json files that describe it as an NgModule, so it appears to VE
builds as a plain, undecorated class. The error message shown in this
situation generic and confusing, since it recommends adding an @NgModule
annotation to a class from a library.
This commit adds special detection into the View Engine compiler to give a
more specific error message when an Ivy NgModule is imported.
PR Close#41534
The Ivy Language Service uses the compiler's template type-checking engine,
which honors the configuration in the user's tsconfig.json. We recommend
that users upgrade to `strictTemplates` mode in their projects to take
advantage of the best possible type inference, and thus to have the best
experience in Language Service.
If a project is not using `strictTemplates`, then the compiler will not
leverage certain type inference options it has. One case where this is very
noticeable is the inference of let- variables for structural directives that
provide a template context guard (such as NgFor). Without `strictTemplates`,
these guards will not be applied and such variables will be inferred as
'any', degrading the user experience within Language Service.
This is working as designed, since the Language Service _should_ reflect
types exactly as the compiler sees them. However, the View Engine Language
Service used its own type system that _would_ infer these types even when
the compiler did not. As a result, it's confusing to some users why the
Ivy Language Service has "worse" type inference.
To address this confusion, this commit implements a suggestion diagnostic
which is shown in the Language Service for variables which could have been
narrowed via a context guard, but the type checking configuration didn't
allow it. This should make the reason why variables receive the 'any' type
as well as the action needed to improve the typings much more obvious,
improving the Language Service experience.
Fixes angular/vscode-ng-language-service#1155
Closes#41042
PR Close#41072
This commit makes the `RadioControlRegistry` class tree-shakable by adding the `providedIn` property to its
`@Injectable` decorator. Now if the radio buttons are not used in the app (thus no `RadioControlValueAccessor`
directive is initialized), the `RadioControlRegistry` should not be included into application's prod bundle.
PR Close#41126
This commit updates Forms code to avoid direct references to all built-in ControlValueAccessor classes, which
prevents their tree-shaking from production builds. Instead, a new static property is added to all built-in
ControlValueAccessors, which is checked when we need to identify whether a given ControlValueAccessors is a
built-in one.
PR Close#41146
PR Close#41197
The custom elements spec is not compatible with ES5 style classes. This
means ES2015 code compiled to ES5 will not work with a native
implementation of Custom Elements. To support browsers that natively
support Custom Elements but not ES2015 modules, we load
`@webcomponents/custom-elements/src/native-shim.js`, which minimally
augments the native implementation to be compatible with ES5 code.
(See [here][1] for more details.)
Previously, the shim was included in `polyfills.ts`, which meant it was
loaded in all browsers (even those supporting ES2015 modules and thus
not needing the shim).
This commit moves the shim from `polyfills.ts` to a `nomodule` script
tag in `index.html`. This will ensure that it is only loaded in browsers
that do not support ES2015 modules and thus do not needed the shim.
NOTE:
This commit also reduces size of the polyfills bundle by ~400B
(52609B --> 52215B).
[1]: https://www.npmjs.com/package/@webcomponents/custom-elements#es5-vs-es2015
PR Close#41162
PR Close#41184
Previously, injector definitions contained a `factory` property that
was used to create a new instance of the associated NgModule class.
Now this factory has been moved to its own `ɵfac` static property on the
NgModule class itself. This is inline with how directives, components and
pipes are created.
There is a small size increase to bundle sizes for each NgModule class,
because the `ɵfac` takes up a bit more space:
Before:
```js
let a = (() => {
class n {}
return n.\u0275mod = c.Cb({type: n}),
n.\u0275inj = c.Bb({factory: function(t) { return new (t || n) }, imports: [[e.a.forChild(s)], e.a]}),
n
})(),
```
After:
```js
let a = (() => {
class n {}
return n.\u0275fac = function(t) { return new (t || n) },
n.\u0275mod = c.Cb({type: n}),
n.\u0275inj = c.Bb({imports: [[r.a.forChild(s)], r.a]}),
n
})(),
```
In other words `n.\u0275fac = ` is longer than `factory: ` (by 5 characters)
and only because the tooling insists on encoding `ɵ` as `\u0275`.
This can be mitigated in a future PR by only generating the `ɵfac` property
if it is actually needed.
PR Close#41022
PR Close#41133
This commit adds a Forms-based test app into the `integration` folder to have an ability to measure and keep
track of payload size for the changes in Forms package.
PR Close#41045
Before `unknown` was available, the `never` type was used to discourage
application developers from using "private" properties. The `unknown` type
is much better suited for this.
PR Close#41040
This commit updates the Angular framework, Angular CDK/Material and
Angular CLI to latest stable versions (11.2.3, 11.2.2 and 11.2.2
respectively).
This update also fixes a Lighthouse audit fail due to
`@angular/core@11.0.0` being identified as vulnerable to XSS:
https://snyk.io/vuln/SNYK-JS-ANGULARCORE-1070902
Regarding the payload size increases, they are mostly attributed to
Angular Material:
- Before this commit: 448461 B
- After framework update: 448554 B ( +93 B)
- After Material update: 449292 B (+738 B)
- After CLI update: 449310 B ( +18 B)
PR Close#40994
PR Close#41069
This commit adds `ngDevMode` guard to show the warning only
in dev mode (similar to how things work in other parts of Ivy runtime code).
The `ngDevMode` flag helps to tree-shake the warning from production builds
(in dev mode everything will work as it works right now) to decrease production bundle size.
PR Close#40876
Our approach for handling cyclic imports results in code that is
not easy to tree-shake, so it is not suitable for publishing in a
library.
When compiling in partial compilation mode, we are targeting
such library publication, so we now create a fatal diagnostic
error instead of trying to handle the cyclic import situation.
Closes#40678
PR Close#40782
Fix router to ensure that a route module is only loaded once especially
in relation to the use of preload strategies with delayed or partial
loading.
Add test to check the interaction of PreloadingStrategy and normal
router navigation under differing scenarios.
Checking:
* Prevention of duplicate loading of modules.
related to #26557
* Prevention of duplicate RouteConfigLoad(Start|End) events
related to #22842
* Ensuring preload strategy remains active for submodules if needed
The selected preload strategy should still decide when to load submodules
* Possibility of memory leak with unfinished preload subscription
related to #26557
* Ensure that the stored loader promise is cleared so that subsequent
load will try the fetch again.
* Add error handle error from loadChildren
* Ensure we handle error from with NgModule create
Fixes#26557#22842#26557
PR Close#40389
Fix router to ensure that a route module is only loaded once especially
in relation to the use of preload strategies with delayed or partial
loading.
Add test to check the interaction of PreloadingStrategy and normal
router navigation under differing scenarios.
Checking:
* Prevention of duplicate loading of modules.
related to #26557
* Prevention of duplicate RouteConfigLoad(Start|End) events
related to #22842
* Ensuring preload strategy remains active for submodules if needed
The selected preload strategy should still decide when to load submodules
* Possibility of memory leak with unfinished preload subscription
related to #26557
* Ensure that the stored loader promise is cleared so that subsequent
load will try the fetch again.
* Add error handle error from loadChildren
* Ensure we handle error from with NgModule create
Fixes#26557#22842#26557
PR Close#40389
Produces a diagnostic when we cannot resolve a component's external style sheet or external template.
The previous behavior was to throw an exception, which crashed the
Language Service.
fixes angular/vscode-ng-language-service#1079
PR Close#40660
This is patch PR for #40621.
Two motivations behind this change:
1. We would like to expose the types of the Language Service to external
users (like the VSCode extension) via the npm package, on the top
level of the package
2. We would like the View Engine and Ivy LS to share a common interface
(notably after the inclusion of `getTcb`, the Ivy LS upholds a
strict superset of `ts.LanguageService`; previously both VE and Ivy
LS were aligned on `ts.LanguageService`.)
To this end, this commit refactors the exports on the toplevel of the
`language-service/` package to just be types common to both the VE and
Ivy language services. The VE and Ivy build targets then import and use
these types accordingly, and the expectation is that an external user
will just import the relevant typings from the toplevel package without
diving into either the VE or Ivy sources.
Follow up on #40607
PR Close#40773
The `AsyncPipe.transform<T>(emitter)` method must infer the `T`
type from the `emitter` parameter. Since we changed the `AsyncPipe`
to expect a `Subscribable<T>` rather than `Observable<T>` the
`EventEmitter.subscribe()` method needs to have a tighter signature.
Otherwise TypeScript struggles to infer the type and ends up making
it `unknown`.
Fixes#40637
PR Close#40644
This PR adds a way for the language server to retrieve compiler options
diagnostics via `languageService.getCompilerOptionsDiagnostics()`.
This will be used by the language server to show a prompt in the editor if
users don't have `strict` or `fullTemplateTypeCheck` turned on.
Ref https://github.com/angular/vscode-ng-language-service/issues/1053
PR Close#40423
Adds an `appendAll()` method to `HttpParams` that can construct the HTTP
request/response body from an object of parameters and values.
This avoids calling `append()` multiple times when multiple parameters
need to be added.
Fixes#20798
PR Close#20930
The injector system uses a bloom filter to determine if a token is
possibly defined in the node injector tree, which is stored across
multiple bloom buckets that each represent 32 bits of the full 256-bit
wide bloom hash. This means that a computation is required to determine
the exact bloom bucket which is responsible for storing any given 32-bit
interval, which was previously computed using three bitmask operations
and three branches to derive the bloom bucket offset.
This commit exploits the observation that all bits beyond the low 5 bits
of the bloom hash are an accurate representation for the bucket offset,
if shifted right such that those bits become the least significant bits.
This reduces the three bitmask operations and three branches with a
single shift operation, while additionally offering a code size
improvement.
PR Close#40489
Previous implementation would fire changes `QueryList.changes.subscribe`
whenever the `QueryList` was recomputed. This resulted in artificially
high number of change notifications, as it is possible that recomputing
`QueryList` results in the same list. When the `QueryList` gets recomputed
is an implementation detail and it should not be the thing which determines
how often change event should fire.
This change introduces a new `emitDistinctChangesOnly` option for
`ContentChildren` and `ViewChildren`.
```
export class QueryCompWithStrictChangeEmitParent {
@ContentChildren('foo', {
// This option will become the default in the future
emitDistinctChangesOnly: true,
})
foos!: QueryList<any>;
}
```
PR Close#40091
This commit updates the logic that calculates `useFactory` function arguments to avoid relying on `instanceof`
checks (thus always retaining symbols) and relies on flags that DI decorators contain (as a monkey-patched property).
Another perf benefit is having less megamorphic reads while calculating args for the `useFactory` call: we used to
check whether a token has `ngMetadataName` property 4 times (in worst case), now we have just 1 megamorphic read in
all cases.
Closes#40143.
PR Close#40145
When we attach a `ViewRef` to a `ViewContainerRef`, we save a reference to the container
onto the `ViewRef` so that we can remove it when the ref is destroyed. The problem is
that if the container's `hostView` is destroyed first, the `ViewRef` has no way of knowing
that it should stop referencing the container.
These changes remove the leak by not saving a reference at all. Instead, when a `ViewRef`
is destroyed, we clean it up through the `LContainer` directly. We don't need to worry
about the case where the container is destroyed before the view, because containers
automatically clean up all of their views upon destruction.
Fixes#38648.
PR Close#40219
There are two parts to this commit:
1. Revert the changes from #38379. This change had an incomplete view of
how things worked and also diverged the implementations of
`applyRedirects` and `recognize` even more.
2. Apply the fixes from the `recognize` algorithm to ensure that named
outlets with empty path parents can be matched. This change also passes
all the tests that were added in #38379 with the added benefit of being
a more complete fix that stays in-line with the `recognize` algorithm.
This was made possible by using the same approach for `split` by
always creating segments for empty path matches (previously, this was
only done in `applyRedirects` if there was a `redirectTo` value). At the
end of the expansions, we need to squash all empty segments so that
serializing the final `UrlTree` returns the same result as before.
Fixes#39952Fixes#10726Closes#30410
PR Close#40029
Prior to this commit, removing `FormControlDirective` and `FormGroupName` directive instances didn't clear
the callbacks previously registered on FromControl/FormGroup class instances. As a result, these callbacks
were executed even after `FormControlDirective` and `FormGroupName` directive instances were destroyed. That was
also causing memory leaks since these callbacks also retained references to DOM elements.
This commit updates the cleanup logic to take care of properly detaching FormControl/FormGroup/FormArray instances
from the view by removing view-specific callback at destroy time.
Closes#20007, #37431, #39590.
PR Close#39235
DI providers can be defined via `useFactory` function, which may have arguments configured via `deps` array.
The `deps` array may contain DI flags represented by DI decorators (such as `@Self`, `@SkipSelf`, etc). Prior to this
commit, having the `@Host` decorator in `deps` array resulted in runtime error in Ivy. The problem was that the `@Host`
decorator was not taken into account while `useFactory` argument list was constructed, the `@Host` decorator was
treated as a token that should be looked up.
This commit updates the logic which prepares `useFactory` arguments to recognize the `@Host` decorator.
PR Close#40122
Allow configuration of `relativeTo` in the `routerLink` directive. This
is related to the clearing of auxiliary routes, where you need to use
`relativeTo: route.parent` in order to clear it from the activated
auxiliary component itself. This is because `relativeTo: route` will
consume the segment that we're trying to clear, so there is really no
way to do this with routerLink at the moment.
Related issue: #13523
Related (internal link): https://yaqs.corp.google.com/eng/q/5999443644645376
PR Close#39720
Differs tries to inject parent differ in order to support extending.
This does not work in the 'root' injector as the provider overrides the
default injector. The fix is to just assume standard set of providers
and extend those instead.
PR close#25015
Issue close#11309 `Can't extend IterableDiffers`
Issue close#18554 `IterableDiffers.extend is not AOT compatible`
(This is fixed because we no longer have an arrow function in the
factory but a proper function which can be imported.)
PR Close#39981
This commit adds `ngDevMode` guard to run `checkNoChanges` only
in dev mode (similar to how things work in other parts of Ivy runtime code).
The `ngDevMode` flag helps to tree-shake this code from production builds
(in dev mode everything will work as it works right now) to decrease production bundle size.
PR Close#39964
This commit adds `ngDevMode` guard to show sanitization warnings only
in dev mode (similar to how things work in other parts of Ivy runtime code).
The `ngDevMode` flag helps to tree-shake these warnings from production builds
(in dev mode everything will work as it works right now) to decrease production bundle size.
PR Close#39959
In the new behavior Angular removes applications from the testability registry when the
root view gets destroyed. This eliminates a memory leak, because before that the
TestabilityRegistry holds references to HTML elements, thus they cannot be GCed.
PR Close#22106
PR Close#39876
DEPRECATION:
Mark the {[key: string]: any} type for the options property of the FormBuilder.group method as deprecated.
Using AbstractControlOptions gives the same functionality and is type-safe.
PR Close#39769
As only methods from the Subscribable interface are currently used in the
implementation of the async pipe, it makes sense to make it explicit so
that it works successfully with any other implementation instead of
only Observable.
PR Close#39627
This commit fixes a bug when `Attribute` DI decorator is used in the
`deps` section of a token that uses a factory function. The problem
appeared because the `Attribute` DI decorator was not handled correctly
while injecting factory function attributes.
Closes#36479
PR Close#37085
Occasionally, the SW would end up in a broken state where some of the
eagerly cached resources of an older version were available in the local
cache, but others (such as lazy-loaded bundles) were not. This would
leave the app in a broken state and a blank screen would be displayed.
See #28114 for a more detailed discussion.
This commit takes advantage of the newly introduced (in v11)
[SwUpdate#unrecoverable][1] API to detect these bad states and recover
by doing a full page reload whenever an [UnrecoverableStateEvent][2] is
emitted.
Partially addresses #28114.
NOTE:
Currently, `SwUpdate.unrecoverable` only works if the app has already
bootstrapped; i.e. if only lazy-loaded bundles have been purged from the
cache.
That should be fine in practice, since the cache entries are removed in
least-recently-used order. Thus the eagerly loaded bundles will be the
last to be removed from the cache (which rarely happens in practice).
[1]: https://v11.angular.io/api/service-worker/SwUpdate#unrecoverable
[2]: https://v11.angular.io/api/service-worker/UnrecoverableStateEvent
PR Close#39651
Previously, the `LocationService` depended on the `SwUpdatesService`.
This felt backwards, since `LocationService` is a more low-level and
basic service and should not be depending on a service for a
higher-level, specific feature (ServiceWorkers).
This commit inverses the relation, making `SwUpdatesService` depend on
`LocationService` instead.
PR Close#39651
Paul Gschwendtner