This is the commit accounting for the Github primary branch
rename when we actually perform the update.
We have three change phases: Prepare, Direct, Cleanup. This commit
is for the `direct` phase.
Note the version of ng-dev used in this LTS branch does not properly
support custom primary branches, but this should be non-relevant here
because this commit will only land in a version branch (11.2.x)
PR Close#45718
Such injectables were not appearing in the providers lists of their NgModule.
This commit updates the doc-gen to support associating these automatically.
Further, it also allows developers to mark other injectables that are provided
in an NgModule with a reference to the NgModule where they are provided.
The commit also does a refactoring of the `processNgModuleDocs` dgeni
processor code, to make it easier to maintain.
Fixes#41203
PR Close#41960
In ##41788, the `disambiguateDocsPathsProcessor` was introduced to fix
an issue with case-insensitively equal paths. This processor may alter
the paths of some docs and thus their final URL in the app.
Previously, both the `disambiguateDocPathsProcessor` and the
`createSitemap` processor (which relies on the docs' computed paths to
generate the sitemap file) were configured to run before the
"rendering-docs" phase. However, this resulted in the
`disambiguateDocPathsProcessor`'s running after `createSitemap`, which
meant that the sitemap did not include the updated doc paths.
This commit fixes it by ensuring that the
`disambiguateDocPathsProcessor` is explicitly run before the
`createSitemap` processor, so that the latter will be able to take into
account any changes made by the former.
PR Close#41842
PR Close#41854
Previously, the `autoLinkCode` Dgeni post-processor would not apply the
custom filters when matching the whole contents of a `<code>` element.
This meant that custom filters would not be applied to single-word
`<code>` elements.
You can see occurrences of this issue in the following sections of the
"Reactive forms" guide:
- [Creating nested form groups][1]
(look for `street, city, state, and zip controls`)
- [Using the FormBuilder service to generate controls][2]
(look for `group method`)
This commit fixes this by also applying the custom filters when
processing the whole contents of a `<code>` element.
This commit also updates the `filterPipes` custom filter to allow
matching a pipe's name in a single-word `<code>` element (where there is
no preceeding `|` character).
[1]: https://v10.angular.io/guide/reactive-forms#creating-nested-form-groups
[2]: https://v10.angular.io/guide/reactive-forms#using-the-formbuilder-service-to-generate-controls
PR Close#41709
PR Close#41854
While generating the docs, when a `<code>` element is inspected for
auto-linking, the `autoLinkCode` Dgeni post-processor will break its
contents up into words and generate text nodes for those words that
should not be auto-linked.
Previously, our text node visitor would visit these generated text nodes
and try to auto-link them too. As a result, it would unnecessarily
process nodes that had already been checked (and could potentially
generate links that would otherwise be ignored).
You can see an occurrence of this issue in the
[Create the product list][1] section of the
"Getting started with Angular" tutorial (look for `<a>`).
This commit fixes this by ensuring the visitor will skip the current
node and any nodes generated by `autoLinkCode`.
[1]: https://v11.angular.io/start#create-the-product-list
PR Close#41709
PR Close#41854
When two documents have the same `outputPath`, only differing by
letter casing, there can be problems on case-insensitive file-systems:
Only one of each of the docs would end up being written.
Moreover, the Webpack 5 bundler will error if it comes across files
that have this kind of ambiguous paths.
This commit adds a new docType: `disambiguator`, which will display
a list of the docs that match an ambiguous path. Each of the ambiguous
docs is then given a unique path and outputPath to ensure there are no
collisions.
PR Close#41788
Previously, the search index info file contained an array of strings that is
the dictionary of terms in the corpus.
Storing this as a space separated string reduces the size of the file.
PR Close#41447
This commit updates the `eslint` and `eslint-plugin-jasmine` packages to
latest versions to take advantage of latest fixes and improvements.
PR Close#41429
PR Close#41471
The AIO search index is built in a WebWorker on the browser from a set
of page information that is downloaded as a JSON file (`search-data.json`).
We want to keep this file as small as possible while providing enough
data to generate a useful index to query against.
Previously, we only included one copy of each (non-ignored) term from each
doc but this prevents more subtle ranking of query results, since the number
of occurences of a term in a doc is lost.
This commit changes the generated file in the following ways:
- All non-ignored terms are now included in the order in which they appear
in the doc.
- The terms are indexed into a dictonary to avoid the text of the term being
repeated in every doc that contains the term.
- Each term is pre-"stemmed" using the same Porter Stemming algorith that the
Lunr search engine uses.
The web-worker has been updated to decode the new format of the file.
Now that all terms are included, it may enable some level of phrase based
matching in the future.
The size of the generated file is considerably larger than previously, but
on production HTTP servers the data is sent compressed, which reduces the
size dramatically.
PR Close#41368
In 6cff877 we broke the decorator docs because the
doc-gen no longer knew how to identify them.
This commit updates the dgeni processor responsible
for identifying the decorators in the code and ensures
that the docs are now generated correctly.
Fixes#40851
PR Close#41091
The "Usage Notes" section is often at the bottom of a long page of content
which can make it difficult to discover. This commit adds a link at the
end of the "Description" if there is a "Usage Notes" section on the page.
This link should help the reader to discover that there is more information
available further down the page.
This is basically a marginal fix. The longer term fix should be to
consider what content goes in which sections and how they should
be laid out on the page.
See #40753
PR Close#40835
Previously, if an entry-point had no public exports (such as the
`@angular/platform-server/shims` introduced in #40559, which is a
side-effect-ful entry-point), it was incorrectly marked as having all
its exports deprecated (which marks the entry-point as deprecated as
well).
This commit fixes this by ensuring that an entry-point is not marked as
having all its exports deprecated if it has no public exports.
PR Close#40737
This new `base-authoring-package` captures all the settings, which
turns of potentially fatal checks, in one place. This new package is
then used as a base for all the docs-watch related packages, rather
than dotting the settings in a variety of different packages. This also
has the benefit that the standard configuration for doc-gen is fatal
on failed checks by default.
PR Close#40479
When using `docs-watch` we try to match the changed file
to a dgeni package in order to trigger a minimal set of processors.
Previously, if the changed file could not be matched we emitted an
ugly error. Now we provide a helpeful message.
PR Close#40479
We can define regions in our examples that can be referenced
and rendered in guides as code snippets. It is quite hard to ensure
that these regions are maintained correctly. One reason for this is
it is hard to know whether a region is being used or not.
This commit adds a new processor that checks for unused named
regions in examples and fails if any are found.
Fixes#19761
PR Close#40479
In the `docs-watch` job we attempt to guess what additional files need
to be processed given a change to a single file. Previously we were not
finding links to examples that were defined over multiple lines. E.g.
```
<code-pane
header="src/app/app.component.html"
region="hero-birthday-template"
path="pipes/src/app/app.component.html">
</code-pane>
```
This commit improves the regular expression to handle these cases.
PR Close#40479
Previously we only logged a warning if we attempted to auto-link
to a doc that had no `path` property, which implies that it is private
and is not rendered.
Now we fail hard during full doc-gen, although when running the
`yarn serv-and-sync` command it should not fail if changes are
only made to guides, which is what authors who use this tool
are most likely to do.
PR Close#40404
Previously, only the first layer of sub-classes were filtered to remove
private exports. But on recursing down further levels these were not
filtered out.
PR Close#40404
This tag-def is being used in the `platform-server` source code,
and was causing warnings in the doc-gen. Adding support
prevents the warning from being shown.
Other than that this change has no effect on the generated
documentation, since the `@default` tag is not used in any
templates.
PR Close#40404
With this change we update the CLI docs template to seperate
the following the default and value types from the argument field.
This should make it clearer and more understandable
PR Close#40038
Previously we hand coded the list of previous major versions
that are displayed in the left navigation.
Now these are generated from the tags in GitHub.
Closes#39688
PR Close#39689
The `generateKeywords` dgeni processor automatically generates keywords
for each document by extracting words from each string property of a
`doc` object.
This commit adds `basePath` to the list of ignored properties, so that
it is _not_ considered when generating keywords. `basePath` mostly
contains the path to some root directory (such as
`/home/circleci/ng/packages`) and as such it does not contain useful
keywords.
For example, searching for `circleci` will match all API docs, because
it happens to be in the `basePath`:
https://v10.angular.io/?search=circleci
PR Close#39409
Decorator API pages list all their available options in an overview
table and also in a detailed view. Now the rendered syntax of each
option will show a `?` after the name if the option is not required.
This is inline with how class and interface members are rendered.
PR Close#39167
This commit updates the Markdown files inside the `aio/tools/` directory
to contain one sentence per line in order to be consistent with how
Markdown files are formatted in the rest of the repo.
PR Close#38992
Remove @angular/platform-webworker and @angular/platform-webworker-dynamic
as they were deprecated in v8
BREAKING CHANGE: @angular/platform-webworker and @angular/platform-webworker-dynamic
have been removed as they were deprecated in v8
PR Close#38846
Data in events page was hardcoded and it is manually moved in the table.
Created a new events widget which will automatically move past and upcoming
events from events.json (`aio/content/marketing/events.json`) file to the
relevant table in the events tab
PR Close#36517
Previously, the [processCliCommands][1] dgeni processor, which is used
to generate the docs pages for the CLI commands, expected the CLI
commands overview page (with a URL of `cli`) to exist as a child of a
top-level navigation section (`CLI Commands`). If one tried to move the
`CLI Commands` section inside another section, `processCliCommnads`
would fail to find it and thus fail to generate the CLI commands docs.
This problem came up in #38353.
This commit updates the `processCliCommands` processor to be able to
find it regardless of the position of the `CLI Commands` section inside
the navigation doc.
[1]:
https://github.com/angular/angular/blob/dca4443a8ed65d341356fe62f6df9934e6314dfe/aio/tools/transforms/cli-docs-package/processors/processCliCommands.js#L7-L9
PR Close#38365
Previously this inline-tag-def was returning the `doc` which is rendered
to the output as `[Object Object]` - obviously not what is intended.
Now it returns `''` which effectively strips the tag handler from the
rendered output.
PR Close#37132
In the code base there are cases where there is, conceptually, a class
that is represented by a combination of an `interface`
(type declaration) and a `const` (value declaration).
For example:
```
export interface SomeClass {
count(a?: string): number;
}
export const: SomeClass = class {
someMethod(a: string = ''): number { ... }
};
```
These were being rendered as interfaces and also not
correctly showing the descriptions and default parameter
values.
In this commit such concepts are now rendered as classes.
The classes that are affected by this are:
* `DebugElement`
* `DebugNode`
* `Type`
* `EventEmitter`
* `TestBed`
Note that while decorators are also defined in this form
they have their own rendering type (`decorator`) and so
are not affecte by this.
PR Close#36989
Abstract directives cannot be part of a `@NgModule`, but the AIO dgeni
setup currently enforces this. This commit updates the logic so that
abstract directives are skipped.
PR Close#36921
Paul Gschwendtner